Owner manual
Table Of Contents
- Quick Setup Guide
- Getting Started
- Table of Contents
- Setting Up the Machine
- 1 Removing the Protective Parts
- 2 Installing the Handset
- 3 Loading Paper
- 4 Installing the Phone Line and Power Cord
- 5 Installing the Ink Cartridges
- 6 Print Quality Check
- 7 Setting the Date and Time
- 8 Setting Your Station ID
- 9 Selecting a Receive Mode
- 10 Setting Up the Message Center
- 11 Selecting Your Language (Canada only)
- 12 Sending in the Product Registration and Test Sheet (USA only)
- 13 Using the FAX as a Printer or for PC-FAX Send
- Replacement Consumables
11
1
Fill out the Product Registration and Test
Sheet.
2
Place the sheet face down in the Automatic
Document Feeder.
3
Enter the toll-free fax number:
1-877-268-9575.
4
Press Black Start.
You can download the Brother Printer Driver and
PC-FAX Send driver from the Brother Solutions
Center for use with the FAX-2440C.
Visit us at:
12
Sending in the Product
Registration and Test
Sheet (USA only)
Make sure (Fax) is illuminated in
Green.
You will receive a confirmation fax of your
Product Registration.
You can also register your product online
using the On-Line Registration link from the
installation CD-ROM or go to
http://www.brother.com/registration
13
Using the FAX as a
Printer or for PC-FAX
Send
■
Please download the Printer Driver first
before connecting the machine to your
computer with the USB cable.
■
You must use an appropriate USB 2.0
interface cable. If you don’t have it, please
purchase a USB 2.0 interface cable that is
no longer than 6 feet long (2 meters).
■
Your machine has a USB 2.0 Full-Speed
interface. This interface is compatible with
USB 2.0 Hi-Speed; however, the
maximum data transfer rate will be
12 Mbits/s. The machine can also be
connected to a computer that has a
USB 1.1 interface.
http://solutions.brother.com
Using the FAX as a Printer
or for PC-FAX Send
Setting Up the Machine