Service manual

V-10
LCD Display < Name of Fail>
Contents of Trouble
Action Reference
BSD
(When auto select is specified)
Push in the Tray
(When a tray is specified)
Push in All Trays
Upper Cassette Detached>
*Any one of trays upper than the feedable tray is open when auto
tray select is specified.
*Any one of trays upper than the specified tray is open when a
tray is specified.
Set the tray
N indicates the tray No.
immediately above the
specified tray.
2.6.1
2.6.2A
2.6.2B
2.6.3
2.6.4
Out of Memory
Please Press Set
<Memory Overflow>
Press the set key.
The processing will
continue. (Job is cleared.)
Overrun Error
Please Press Set
<Overrun>
Press the set key.
The processing will
continue. (Job is printed
from the next page)
Disk Full
Please Press Set
<Harddisk Full>
Press the set key.
The processing will
continue. (Job is cleared.)
PCL6 Error %u
Please Press Set
<PDL Error>
Press the set key.
The processing will
continue. (Job is cleared.)
ID error
Please Press Set
<F/W Download ID Error> Press the Set key.
The processing will
continue. (Job is cleared.)
Address error
Please Press Set
<F/W Download Range Error> Press the Set key.
The processing will
continue. (Job is cleared.)
Timeout error
Please Press Set
<F/W Download Timeout Error> Press the Set key.
The processing will
continue. (Job is cleared.)
Header error
Please Press Set
<F/W Download Header Error> Press the Set key.
The processing will
continue. (Job is cleared.)
Checksum error
Please Press Set
<F/W Download Checksum Error> Press the Set key.
The processing will
continue. (Job is cleared.)