Service manual

VI-35
ABCDEFGHJ
1 2 3 4 5 6
TONER CARTRIDGE SIGNAL
1
1
1
HUMI SIGNAL TEMP SIGNAL ADC SENSOR SENSED SIGNEL
1
1
1
1
WASTE TONER FULL SENSED SIGNAL
1
Virtual Line
2.8.7 2.8.7 2.8.7 2.8.7
2.8.8 MONITORING
MCU HL-4200 PL12.1
CONSOLE PANEL HIBANA PL1.1
2.8.5 2.8.5 2.8.5 2.8.5
TONER CARTRIDGE(Y) SET SIGNAL TONER CARTRIDGE(M) SET SIGNAL TONER CARTRIDGE(C) SET SIGNAL TONER CARTRIDGE(K) SET SIGNAL
2.8.3 2.8.3 2.8.3 2.8.3 2.8.3
1
CONTROL LOGIC
1
1
1
1
IOT Hum Temp Sensor Error IOT ADC Sensor Error IOT Low Density Error
NO TONER SENSOR(Y) SENSED SIGNAL NO TONER SENSOR(M) SENSED SIGNAL NO TONER SENSOR(C) SENSED SIGNAL NO TONER SENSOR(K) SENSED SIGNAL
1
IOT(Y)Toner CRUM Error IOT(M)Toner CRUM Error IOT(C)Toner CRUM Error IOT(K)Toner CRUM Error
Replace Yellow Toner (Y)
Replace Magenta Toner (M)
Replace Cyan Toner (C)
Replace Black Toner (K)
Pull out the (Y) toner seal
Pull out the (M) toner seal
Pull out the (C) toner seal
Pull out the (K) toner seal
ID error for (Y) toner cart
ID error for (M) toner cart
ID error for (C) toner cart
ID error for (K) toner cart
Reinsert Yellow Toner (Y)
Reinsert Magenta Toner (M)
Reinsert Cyan Toner (C)
Reinsert Black Toner (K)
Clean Up CTD Sensor
Reinsert Trans Roll
Replace Transfer Roll
010-354
009-340
009-342
009-360
009-361
009-362
009-363
009-360
009-361
010-354
009-340
009-342
009-362
009-363
2.8 XEROGRAPHICS