Service manual

II-15
5) Align the four corners of the paper stack and insert the paper (print side up) under
the tab.
Note:
Do not use paper that is folded, creased, or heavily warped.
Do not overload the paper tray.
Fig.2-36
6) Make sure that the side guides are aligned with the edges of the paper.
Note:
Pushing the paper guides too hard against the edges of the paper stack can cause
a paper jam. However, if the paper guide is too loose, the paper may twist as it
feeds through the printer.
Fig.2-37
7) Hold the paper tray with both hands, align it with the opening in the printer and
gently insert it.
Fig.2-38