Service manual

HL-5030/5040/5050/5070N SERVICE MANUAL
6-11
(5) Open the back output tray. Pull the jammed paper out of the fuser unit. If the paper jam
can be cleared, go to Step 7.
Fig. 6-6
NOTE:
If you have to pull the paper toward the back of the printer, the fuser may get dirty with toner
powder and it may scatter on the next printouts. Print a few copies of the test page until the
scattering of toner stops.
!
CAUTION:
After you have just used the printer, some internal parts of the printer are extremely hot! Wait
for the printer to cool down before you touch the internal parts of the printer.
Fig. 6-7
(6) Open the jam clear cover. Pull the jammed paper out of the fuser unit.
Fig. 6-8