User`s guide
Table Of Contents
- Definitions of warnings, cautions, and notes
- To use the printer safely
- Brother Numbers (USA and Canada)
- Frequently asked questions (FAQs)
- Important information: Regulations
- Federal Communications Commission (FCC) Declaration of Conformity (For USA)
- Industry Canada Compliance Statement (For Canada)
- Radio interference (220 to 240 volt model only)
- International ENERGY STAR® Compliance Statement
- Laser Safety (100 to 120 volt model only)
- FDA Regulations (100 to 120 volt model only)
- IEC 60825 specification (220 to 240 volt model only)
- IMPORTANT - For Your Safety
- Trademarks
- Table of Contents
- About this printer
- Driver and software
- Control panel
- Options
- Routine maintenance
- Troubleshooting
- Appendix
- INDEX
ABOUT THIS PRINTER 1 - 43
Printing on both sides of the paper (manual duplex printing)
The supplied PCL printer drivers for Windows
®
95/98/Me, Windows NT
®
4.0, Windows
®
2000/XP, Mac
®
OS 8.6 to 9.2 and Mac
®
OS X 10.1 or later all enable manual duplex printing. For more information about
how to choose the settings, see the Help text in the printer driver.
Manual duplex printing from the paper tray
1
Choose the Manual Duplex mode you need from the printer driver.
2
The printer will automatically print all the even-numbered pages on one side of the paper first.
3
Remove the printed even-numbered pages from the output tray and put them back in the paper tray,
placing the paper with the side to be printed on (blank side) face down. Follow the instructions on
the computer screen.
Figure 1-55
4
The printer will now automatically print all the odd-numbered pages on the other side of the paper.
The PS driver does not support manual duplex printing.