Getting Ready Sewing Basics Utility Stitches Product Code:882-U73 Character/ Decorative Stitches Embroidery Embroidery Edit My Custom Stitch Appendix Please visit us at http://solutions.brother.com when you can get product support and answers to frequently asked questions (FAQs).
IMPORTANT SAFETY INSTRUCTIONS When using this machine, basic safety precautions should always be taken, including the following: Read all instructions before using. DANGER - To reduce the risk of electric shock: 1. The machine should never be left unattended while plugged in. Always unplug the machine from the electrical outlet immediately after using and before cleaning. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons: 1.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Federal Communications Commission (FCC) Declaration of Conformity (For USA Only) Responsible Party: Brother International Corporation 100 Somerset Corporate Boulevard Bridgewater, NJ 08807-0911 USA TEL : (908) 704-1700 declares that the product Product Name: Model Number: Brother Sewing Machine NV2200 complies with Part 15 of the FCC Rules.
CONGRATULATIONS ON CHOOSING OUR MACHINE Your machine is the most advanced computerized household embroidery and sewing machine. To fully enjoy all the features incorporated, we suggest that you study the manual. PLEASE READ BEFORE USING THIS MACHINE For safe operation 1. Be sure to keep your eye on the needle while sewing. Do not touch the handwheel, thread take-up lever, needle, or other moving parts. 2.
HOW TO USE THIS MANUAL Chapters 1 and 2 describe to the first-time user the initial operations for using this machine and the basic sewing operations. To sew utility stitches Continue with chapter 3 to learn how to select a stitch and sew using the various stitches.
CONTENTS CONTENTS NAMES OF MACHINE PARTS AND THEIR FUNCTIONS ........................................................... 9 Machine ..................................................................... 9 Needle and Presser Foot Section ............................... 10 Embroidery Unit ....................................................... 10 Operation Buttons .................................................... 11 Included Accessories ................................................ 11 Options ...........
CONTENTS Embroidering Small Fabrics and Fabric Edges .......... 123 ATTACHING THE EMBROIDERY FRAME ..........124 EDITING THE PATTERN ....................................125 Changing the Embroidery Frame Display................. Changing the Pattern Position.................................. Rotating the Pattern ................................................. Changing the Pattern Size........................................ Creating a Horizontal Mirror Image .........................
8
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Machine ■ Front View ■ Right-side/Rear View a Top cover a Handle Open the top cover to thread the machine and wind the bobbin. b Thread guide plate Pass the thread around the thread guide plate when threading the upper thread. c Thread take-up lever check window Look through the window to check the position of the take-up lever.
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Needle and Presser Foot Section a Buttonhole lever Lower the buttonhole lever when sewing buttonholes and bar tacks. b Presser foot holder The presser foot is attached to the presser foot holder. c Presser foot holder screw Use the presser foot holder screw to hold the presser foot holder in place. d Presser foot The presser foot consistently applies pressure to the fabric as it is sewn. Attach the appropriate presser foot for the selected stitch.
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Operation Buttons Included Accessories The accessories are stored in the flat bed attachment. Open the flat bed attachment as shown below. a “Start/Stop” button b When this button is pressed, the machine sews a few stitches at a low speed, then begins sewing at the speed set by the sewing speed controller. Press this button again to stop sewing. This button lights up in a different color depending on the machine’s operating condition.
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS 1 2 8 9 10 3 4 5 11 12 13 15 14 6 7 16 17 18 75/11 2 needles 90/14 2 needles 90/14 2 needles: Ball point needle (gold colored) 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 44 * 45 * 46 * 42 48 * 43 * 49 ** * See Circular Attachment Instruction Manual for detailed instruction. ** See Bobbin Work Instruction Manual for detailed instruction.
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Part Code Part Code No. Part Name U.S.A./ Canada No.
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Options 1 Memo 2 • All specifications are correct at the time of printing. 3 • Please be aware that some specifications may change without notice. Note 4 5 • Embroidery cards purchased in foreign countries may not work with your machine. 6 • Visit your authorized dealer for complete listing of optional accessories available for your machine. 7 8 10 11 9 Part Code No.
1 Chapter 1 Getting Ready TURNING THE MACHINE ON/OFF....................................................16 LCD SCREEN........................................................................................17 ■ Display Precautions.........................................................................................................17 ■ Key Functions ..................................................................................................................18 Using the Machine Setting Mode Key...
TURNING THE MACHINE ON/OFF TURNING THE MACHINE ON/OFF WARNING • Use only regular household electricity as the power source. Using other power sources may result in fire, electric shock, or damage to the machine.
LCD SCREEN LCD SCREEN ■ Display Precautions 1 Getting Ready • Only touch the display with your finger or the touch pen included with the machine. Do not use a mechanical pencil, screwdriver or any other hard or sharp objects. In addition, do not press the display with extreme pressure, otherwise damage to the display may result. • All or part of the display may sometimes become darker or lighter due to fluctuations in the surrounding temperature or other changes in the environment.
LCD SCREEN ■ Key Functions With your finger or the touch pen, press a key at the top of the display ( screen that is displayed. a b ) to change the c e f d g h i j k l m n o r q p s Operation panel No. 18 Key Name Function Page a Machine setting mode key Press this key to change the needle stop position, turn the buzzer on/off, adjust the pattern or screen, and change other machine settings.
LCD SCREEN Screen No. Key Name Page h Press this key to lock the screen. When the screen is locked, the various settings, such as the stitch width and stitch length, are locked and cannot be changed. Press this key again to unlock the settings. 45 i Sewing type selection key Press this key when you need help selecting the appropriate stitch pattern for the sewing application and when you need instructions on how to sew the selected stitch pattern. This key is very helpful for beginners.
LCD SCREEN Using the Machine Setting Mode Key Press to change the needle stop position, turn the buzzer on/off, adjust the pattern or screen, and change other basic machine settings. a Select whether the needle stops in the raised or lowered position when the machine is stopped. b Select whether to use the sewing speed controller or to adjust the zigzag width (see page 64). c Make adjustments to the character and decorative a b c d e f stitch patterns (see page 92).
LCD SCREEN a Adjust the density of the display. * Press to make the screen lighter. * Press to make the screen darker. Adjust the density so that the contrast between a b and can be clearly seen. e e Select one of the 13 display languages: when the machine is turned on. Getting Ready d b Turn on/off the buzzer. c Turn on/off the needle area and work area lights.
LCD SCREEN Using the Machine Operation Mode Key Basic machine operations and other information based on the contents of this Operation Manual are stored in this machine. Press to open the screen shown below. Six categories are displayed at the top of the screen. Press a key to see more information about that category.
LCD SCREEN Example: a Press Press b Displaying information about upper threading Using the Pattern Explanation Key . . the stitch, and then press the selected stitch. Example: c Press to see a description of Displaying information on the use for (upper threading). . a Select , and then press 1 Getting Ready → A list of basic operations appears in the lower half of the screen. To learn more about the uses for a stitch pattern, select . → The instructions for threading the machine appear.
LOWER/UPPER THREADING LOWER/UPPER THREADING c Winding the Bobbin Set the supplemental spool pin in the “up” position. This section describes how to wind thread onto a bobbin. With this machine, you can use the supplemental spool pin to wind the bobbin while sewing using the main spool pin. a CAUTION • The included bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly.
LOWER/UPPER THREADING e While holding the thread from the spool in your right hand, hold the end of the thread with your left hand, and then pass the thread through the thread guide. i Slide the bobbin holder to the left until it snaps into place. * When the bobbin holder is set to the left, it works as a switch to make the bobbin wind automatically. 1 a a Bobbin holder (switch) → The bobbin stops spinning automatically when it is full, and the bobbin holder returns to its original position.
LOWER/UPPER THREADING ■ Winding the Bobbin Using the Spool Pin The main spool pin cannot be used to wind the bobbin while sewing. For details, see “Using the Supplemental Spool Pin” on page 24. 2 8 e Slide the spool cap as far as possible onto the spool pin, and then return the spool pin to its original position. f While holding the thread from the spool with both hands, pull the thread through the lower notch in the thread guide plate, then through the upper notch.
LOWER/UPPER THREADING e Setting the Bobbin This section describes how to set a bobbin wound with thread into the machine. You can begin sewing without pulling up the bobbin thread. If you wish to pull up the bobbin thread, for example, when sewing gathers, follow the procedure described in the next section. Lightly hold down the bobbin with your right hand, and then, while slightly pulling the thread with your left hand, guide it through the groove. 1 • Use a bobbin thread that has been correctly wound.
LOWER/UPPER THREADING b Guide the bobbin thread through the groove, following the arrow in the illustration. Note • Do not cut the thread with the cutter. • Do not attach the bobbin cover. Upper Threading This section describes how to thread the machine and the needle. The machine is marked with numbers that indicate the threading order. CAUTION c While lightly holding the upper thread, press the “Needle Position” button twice to lower, then raise the needle. • Be sure to thread the machine properly.
LOWER/UPPER THREADING c Press the “Needle Position” button to raise the needle. g While holding the thread from the spool in your right hand, hold the end of the thread with your left hand, and then guide the thread through the groove, following the arrows in the illustration. 1 Getting Ready Note If you try to thread the needle with the needle threader lever without raising it, damage to the machine may result.
LOWER/UPPER THREADING j Pass the thread through the thread guide disks (marked “7”). * Make sure that the thread passes through the groove in the thread guide. * Make sure that the thread securely enters the thread guide disks, otherwise the needle may not be threaded. m n Release the needle threader lever. → The thread passes through the eye of the needle. Carefully pull the end of thread that was passed through the eye of the needle. Note Do not pull the thread strongly.
LOWER/UPPER THREADING Using the Twin Needle c Pass the thread through the needle bar thread guide, and then thread the needle on the left side. Using the twin needle, you can sew two parallel lines of the same stitch. Although the same bobbin thread is used, interesting patterns can be sewn by threading each needle with a different color of thread. Both upper threads should have the same thickness and quality. The twin needle can only be used with patterns where 1 appears when they are selected.
LOWER/UPPER THREADING g While holding the thread from the spool with both hands, pull the thread through the lower notch in the thread guide plate, then through the upper notch. Hold the end of the thread with your left hand, and then guide the thread through the groove, following the arrows in the illustration. k Press to select the setting for twin needle sewing. * The stitch width becomes narrower than with single needle sewing. a a a Single needle/twin needle setting → appears.
CHANGING THE PRESSER FOOT CHANGING THE PRESSER FOOT 1 CAUTION in the operation panel before changing the presser foot. If is not pressed and the “Start/Stop” button or another button is pressed, the machine will start and may cause injury. • Always use the correct presser foot for the selected stitch pattern. If the wrong presser foot is used, the needle may strike the presser foot and bend or break, and may cause injury. • Only use presser feet made for this machine.
CHANGING THE NEEDLE CHANGING THE NEEDLE CAUTION • Always press in the operation panel before changing the needle. If is not pressed and the “Start/ Stop” button or another operation button is pressed accidentally, the machine will start and injury may result. • Use only sewing machine needles made for home use. Other needles may bend or break and may cause injury. • Never sew with a bent needle. A bent needle will easily break and may cause injury.
CHANGING THE NEEDLE c Use the included screwdriver to turn the needle clamp screw toward the front of the machine to loosen it, and then remove the needle. 1 Getting Ready Note Do not apply extreme force when loosening or tightening the needle clamp screw, otherwise damage to the machine may result. d With the flat side of the needle facing the back, insert the new needle until it touches the needle stopper. Use the screwdriver to securely tighten the needle clamp screw.
CHANGING THE NEEDLE ■ About the Needle The sewing machine needle is probably the most important part of the sewing machine. Choosing the proper needle for your sewing project will result in a beautiful finish and fewer problems. Below are some things to keep in mind about needles. • The smaller the needle number, the finer the needle. As the numbers increase, the needles get thicker. • Use fine needles with lightweight fabrics, and thicker needles with heavyweight fabrics.
2 Chapter 2 Sewing Basics SEWING ..............................................................................................38 Sewing a Stitch........................................................................................................38 ■ Using the Foot Controller................................................................................................39 ■ Using the Knee Lifter.......................................................................................................
SEWING SEWING CAUTION • To avoid injury, pay special attention to the needle while the machine is in operation. Keep your hands away from moving parts while the machine is in operation. • Do not stretch or pull the fabric during sewing. Doing so may lead to injury. • Do not use bent or broken needles. Doing so may lead to injury. • Take care that the needle does not strike basting pins or other objects during sewing. Otherwise, the needle may break and cause injury.
SEWING h To stop sewing, press the “Start/Stop” button again. ■ Using the Foot Controller You can also use the foot controller to start and stop sewing. CAUTION • i Press the “Thread Cutter” button to trim the threads. Do not allow fabric pieces and dust to collect in the foot controller. Doing so could cause a fire or an electric shock. 2 Memo • a Insert the foot controller plug into its jack on the machine. The needle automatically stops in the raised position.
SEWING ■ Using the Knee Lifter Using the knee lifter, you can raise and lower the presser foot with your knee, leaving both hands free to handle the fabric. a Align the tabs on the knee lifter with the notches in the jack, and then insert the knee lifter as far as possible. Sewing Reinforcement Stitches Generally stitching must be secured at the beginning and end with reverse/reinforcement stitches. Press the “Reverse/Reinforcement Stitch” button to sew reverse/ reinforcement stitches.
SEWING Sewing Heavyweight Fabric ■ If the Fabric Does Not Fit Under the Presser Foot b While keeping the black button on the left side of presser foot “J” pressed in, lower the presser foot lever. The presser foot lever can be raised to two different positions. If the fabric is too thick to fit under the presser foot, raise the presser foot lever to its highest position so that the fabric can be placed under the presser foot. * The presser foot remains level, enabling the fabric to be fed.
ADJUSTING STITCH SETTINGS ADJUSTING STITCH SETTINGS When a stitch is selected, the most appropriate stitch width, stitch length, and upper thread tension are automatically set. However, if needed, you can change any of the settings as described in this section. Note • Settings for some stitches cannot be changed (See the “STITCH SETTING CHART” at the end of this manual).
USEFUL FUNCTIONS Adjusting the Thread Tension The default thread tension, which is automatically set, can normally be used regardless of the type of thread or fabric being sewn. However, with some fabric and thread combinations, the thread tension may need to be adjusted. ■ Upper Thread Is Too Tight If the bobbin thread can be seen on the surface of the fabric, press . Each press of the key reduces the setting and makes the thread tension more loose.
USEFUL FUNCTIONS c Place the fabric under the presser foot with the needle at the starting point of the stitching, and then press the “Start/Stop” button. The machine will automatically sew reverse stitches (or reinforcement stitches), and then begin sewing. b Press to select the automatic thread cutting setting.
USEFUL FUNCTIONS Locking the Screen If the screen is locked before starting to sew, the various settings, such as the stitch width and stitch length, are locked and cannot be changed. This prevents screen settings from accidentally being changed or the machine from being stopped while large pieces of fabric or other projects are being sewn. The screen can be locked while sewing utility stitches and character/ decorative stitches. a Select a stitch pattern. 2 c Press . → The key appears as .
USEFUL FUNCTIONS 46
3 Chapter 3 Utility Stitches SELECTING A UTILITY STITCH ...........48 ■ Stitch Selection Screens ....................................... 48 Selecting a Stitch Pattern.................................. 49 ■ Using the Mirror Image Key ................................. 49 ■ Hemstitching (3) (Drawn Work (2)) .....................73 Buttonhole Stitches...........................................74 ■ Sewing Stretch Fabrics .........................................
SELECTING A UTILITY STITCH SELECTING A UTILITY STITCH ■ Stitch Selection Screens Press to display the previous or next page.
SELECTING A UTILITY STITCH Selecting a Stitch Pattern a Saving Stitch Settings Turn on the machine, and then lightly press the display. → Depending on the setting, either "1-01 Straight stitch (Left)" or "1-03 Straight stitch (Middle)" is automatically selected. This machine is preset with the default settings for the stitch width (zigzag width), stitch length, thread tension, automatic thread cutting, automatic reverse/ reinforcement stitching, etc.
SELECTING A UTILITY STITCH b Memo Press . • The next time that the same straight stitch is selected, the stitch length is set to 2.0 mm. • All stitch settings (stitch width (zigzag width), stitch length, thread tension, automatic thread cutting, and automatic reverse/reinforcement stitching) are saved, not just the setting that was changed. When the same stitch pattern is selected, the last settings saved are displayed even if the machine was turned off.
SEWING THE STITCHES SEWING THE STITCHES Straight Stitches Note When using the twin needle (see page 31), be sure to attach presser foot “J”. Stitch Key Stitch Name Presser Foot Stitch width [mm (inch.)] Applications Stitch length [mm (inch.)] Twin needle Manual Auto. Manual 0.0 (0) 0.0 - 7.0 (0 - 1/4) 2.5 (3/32) 0.2 - 5.0 (1/64 - 3/16) OK (J) General sewing, gather, pintuck, etc. Reinforcement stitch is sewn while pressing “Reverse/ Reinforcement Stitch” button. 0.0 (0) 0.0 - 7.
SEWING THE STITCHES a Select a stitch pattern. b Attach presser foot “J”. c Hold the thread ends and the fabric with your left hand, and turn the handwheel toward you with your right hand to insert the needle into the fabric at the starting point of the stitching. a a Starting point of stitching d Lower the presser foot lever. e Hold the “Reverse/Reinforcement Stitch” button pressed to sew reverse stitches (or reinforcement stitches), and then press the “Start/Stop” button to start sewing slowly.
SEWING THE STITCHES Darts Seams Memo For a standard 16 mm (approx. 5/8 inch) seam allowance, set the width to 0 mm on the screen. While sewing, align the edge of the fabric with the 16mm (approx. 5/8 inch) mark on the needle plate. a Press b Press the “Reverse/Reinforcement Stitch” button to sew reverse stitches at the beginning of the stitching, and then sew from the wide end to the other end without stretching the fabric. J , and then attach presser foot “J”.
SEWING THE STITCHES Gathering e Pull the bobbin threads to create the desired amount of gathering, and then tie the threads. f Smooth the gathers by ironing them. g Sew along the seam line, and then remove the basting stitch. Sew gathers on sleeves, the waist of a gathered skirt, etc. a b Select a straight stitch, and then attach presser foot “J”. Set the stitch length to 4.0 mm (approx. 3/16 inch) and the thread tension to 2.0 (weaker tension).
SEWING THE STITCHES d Lay both seam allowances on the side of the shorter one (cut seam allowance) and iron them flat. Pintucks Use pin tucks to decorate blouses. a a Mark the positions of the folds on the wrong side of the fabric. a Wrong side of fabric e a Fold the longer seam allowance around the shorter one, and then sew along the edge of the fold. a Wrong side of fabric b a Turn the fabric over, and then iron only the folds with the tip of the iron.
SEWING THE STITCHES Zigzag Stitches Zigzag stitches are useful for a variety of applications, including overcasting and sewing appliqués and patchwork. Note When using the twin needle (see page 31), be sure to attach presser foot “J”. Stitch Key Stitch Name Zigzag stitch (Middle) Zigzag stitch (Middle) a Presser Foot Stitch Width [mm (inch)] Applications Stitch Length [mm (inch)] Twin Needle Auto Manual Auto Manual For overcasting, mending.
SEWING THE STITCHES ■ Patchwork (Crazy Quilts) ■ Sewing Curves Turn back the desired width of fabric, place it over a different piece of fabric, and then sew the two fabric pieces together so the stitching bridges both pieces. Shorten the stitch length setting to obtain a fine stitch. Sew slowly, keeping the seams parallel with the fabric edge as you guide the fabric around the curve.
SEWING THE STITCHES Overcasting Sew overcasting at the beginning and end of seams for skirts or pants, and at the beginning and end of all cuttings. Depending on the selected stitch, use presser foot “G” or “J” or the side cutter attachment.
SEWING THE STITCHES ■ Overcasting Using Presser Foot “J” Stitch Key Stitch Name Presser Foot Stitch width [mm (inch.)] Applications Overcasting stitch Reinforced seaming of stretch fabric Overcasting stitch Reinforcing of medium stretch fabric and heavyweight fabric, decorative stitching Overcasting stitch Reinforcement of stretch fabric or decorative stitching Overcasting stitch Stretch knit seam Stitch length [mm (inch.)] Twin needle Auto. Manual Auto. Manual 5.0 (3/16) 0.0 - 7.
SEWING THE STITCHES ■ Overcasting Using the Side Cutter By using the side cutter, you can do overcasting while cutting the fabric. CAUTION • Make sure to only select one of the stitches listed below. Using another stitch may cause the needle to hit the presser foot and break, possibly causing injury. Memo Thread the needle manually when using the side cutter, or only attach the side cutter after threading the needle using the needle threader.
SEWING THE STITCHES d h Select a stitch. Start sewing. → A seam allowance is cut while the stitching is sewn. Note If the width has been adjusted, turn the handwheel by hand to check that the needle does not touch the side cutter. If the needle touches the side cutter, it might cause the needle to break. e Make a cut of approximately 20 mm (approx. 3/4 inch) in the fabric. The seam margin should be approximately 5 mm (approx. 3/16 inch).
SEWING THE STITCHES Quilting You can make beautiful quilts quickly and easily with this machine. When making a quilt, you will find it convenient to use the knee lifter and foot controller to free your hands for other tasks (see “Using the Foot Controller” on page 39 and/or see “Using the Knee Lifter” on page 40). Patterns with “P” or “Q” in the lower-right corner of the key are intended for quilting. Stitch Key Presser Foot Stitch Name Piecing stitch (Right) Stitch width [mm (inch.
SEWING THE STITCHES ■ Quilting Sewing together the quilt top, batting, and backing is called quilting. You can sew the quilt with the walking foot to keep the quilt top, batting, and backing from sliding. The walking foot has a set of feed dogs that move together with the feed dogs in the needle plate during sewing. a Follow the steps on page 33 to remove the presser foot. b Loosen the screw of the presser foot holder to remove the presser foot holder.
SEWING THE STITCHES e Check the needle drop point, and then sew along the edge of the appliqué while making sure that the needle drops slightly off the edge of the fabric. e Set “WIDTH CONTROL” to “ON”. The sewing speed will be adjusted using the foot controller. f Press g While sewing, slide the sewing speed controller to adjust the stitch width. J a a Needle drop point CAUTION • Be careful that the needle does not strike a basting pin during sewing.
SEWING THE STITCHES ■ Free-motion Quilting With free-motion quilting, the feed dogs can be lowered (using the feed dog position switch) so that the fabric can be moved freely in any direction. The quilting foot is needed for free-motion quilting. We recommend attaching the foot controller and sewing at a consistent speed. e Lower the feed dog position switch, located at the rear of the base of the machine, to .
SEWING THE STITCHES Blind Hem Stitches Select a blind hem stitch to sew the hems or cuffs of dresses, blouses, pants, or skirts. Stitch Key Stitch Name Presser Foot Blind hem stitch Stitch Width [mm (inch)] c Twin Needle Manual Auto Manual 00 3← − →3 2.0 (1/16) 1.0 - 3.5 (1/16 - 1/8) NO 00 3← − →3 2.0 (1/16) 1.0 - 3.5 (1/16 - 1/8) NO Hemming stretch fabric Select a stitch pattern.
SEWING THE STITCHES f Remove the basting, and then turn over the fabric. a b Appliqués a Use a temporary spray adhesive or basting to attach the appliqué to the fabric. a a Wrong side of fabric b Surface of fabric b Memo a Appliqué b Fabric glue b Press or 3 . Memo • Adjust the stitch width and length according to the shape, size and fabric quality of the appliqué (see page 42). • For details on the stitch patterns, refer to the “STITCH SETTING CHART” at the end of this manual.
SEWING THE STITCHES ■ Sewing Sharp Curves Stop the machine with the needle in the fabric outside the appliqué. Raise the presser foot and turn the fabric a little bit at a time while sewing for an attractive finish to the seam. d Attach presser foot “J”, and then sew along the edge of the fabric, making sure that the needle drops slightly off the edge. Shell Tuck Stitching The arched tuck that looks like shells lined up in a row is called a shell tuck.
SEWING THE STITCHES b Leave a seam when sewing the scallop stitches so that the pattern is not sewn directly on the edge of the fabric. c Turn the fabric over so that the surface faces up, and then sew over the seam with the center of the presser foot aligned with the seam. * Select one of the following stitch patterns. Note Sew test stitches on the fabric before sewing on your project. a a Surface of fabric Trim along the seam, making sure not to cut the stitches.
SEWING THE STITCHES e Pull the bobbin threads to create the desired amount of gather, and then smooth the gathers by ironing them. Fagoting Stitching across an open seam is called fagoting. It is used on blouses and children’s clothing. a Separate the two pieces of fabric by about 4 mm (approx. 3/16 inch), and baste them onto thin paper. a b f Press or . c Memo For details on the stitch patterns, refer to the “STITCH SETTING CHART” at the end of this manual.
SEWING THE STITCHES Tape or Elastic Attaching f Press or . Elastic tape is sewn onto the fabric unstretched. Note Select a straight stitch, and then attach a presser foot “J”. For details on the stitch patterns, refer to the “STITCH SETTING CHART” at the end of this manual. g Note Make sure that the automatic reverse/reinforcement stitching and automatic thread cutting settings are not selected. b Set the stitch length to 4.0 mm (approx. 3/16 inch) and the thread tension to 2.0 (weaker tension).
SEWING THE STITCHES Heirloom Stitching By sewing with the wing needle sold separately, the needle holes are enlarged, creating a lace-like decorative stitch. This stitching is used to decorate tablecloths, hems, and shirt fronts. b Select a stitch, attach presser foot “N”, and then start sewing. * Select a stitch between 3-01 and 3-22. Drawn Work (1 ■ Hemstitching (1) (Daisy Stitch) Note For best results, use lightweight to medium weight homespun fabrics with a slight stretch.
SEWING THE STITCHES a Pull out several threads from the fabric to leave a 3 mm (approx. 1/8 inch) area open. ■ Hemstitching (3) (Drawn Work (2)) Memo For best result, use loosely woven fabrics. Memo Drawn work can also be sewn using the wing needle (sold separately). a b Press , and then attach presser foot “N”. Pull out several threads from both sides of a 4 mm (approx. 3/16 inch) area left unopened, as shown in the illustration.
SEWING THE STITCHES Buttonhole Stitches Select the desired buttonhole stitch according to your application and the size of the button. Stitch Key Stitch Name Presser Foot Stitch Width [mm (inch)] Applications Stitch Length [mm (inch)] Auto Manual Auto Manual 5.0 (3/16) 3.0 - 5.0 (1/8 - 3/16) 0.4 (1/64) 0.2 - 1.0 (1/64 - 1/16) NO 5.5 (7/32) 3.5 - 5.5 (1/8 - 7/32) 0.4 (1/64) 0.2 - 1.0 (1/64 - 1/16) NO 5.0 (3/16) 3.0 - 5.0 (1/8 - 3/16) 0.4 (1/64) 0.2 - 1.0 (1/64 - 1/16) NO 5.
SEWING THE STITCHES a Select a stitch, and then attach presser foot “A”. b Mark the position and length of the buttonhole on the fabric. d Hold the outside frame of the buttonhole foot toward the back with your finger, and then lower the presser foot so that the mark on the fabric aligns with the marks on the buttonhole foot. Memo a The maximum buttonhole length is 28 mm (approx. 11/6 inches) (diameter + thickness of the button).
SEWING THE STITCHES f Gently hold the end of the upper thread, and then start sewing. * Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. * If the automatic thread cutting setting is selected before sewing, the machine will automatically cut the thread at the end of stitching. g Insert a pin along the inside of a bar tack at the end of the buttonhole, and then insert the seam ripper into the center of the buttonhole and cut towards the pin.
SEWING THE STITCHES ■ Sewing Stretch Fabrics When sewing a buttonhole on stretch fabrics, press or a , and use a gimp thread. Hook the gimp thread onto the back of buttonhole foot “A”, and then pull the ends of the gimp thread under the presser foot. Pass the thread ends through the grooves at the front of the presser foot, and then temporarily tie them. ■ Buttons That Do Not Fit into the Button Holder Plate Use the markings on the presser foot scale to set the size of the buttonhole.
SEWING THE STITCHES ■ Darning Use darning stitches for mending and other applications. Stitch Key Stitch Name Presser Foot Darning Applications Stitch Width [mm (inch)] Darning of medium weight fabric Darning Darning of heavyweight fabric Stitch Length [mm (inch)] Twin Needle Auto Manual Auto Manual 7.0 (1/4) 2.5 - 7.0 (3/32 - 1/4) 2.0 (1/16) 0.4 - 2.5 (1/64 - 1/16) NO 7.0 (1/4) 2.5 - 7.0 (3/32 - 1/4) 2.0 (1/16) 0.4 - 2.
SEWING THE STITCHES d e Pull down the buttonhole lever. * The buttonhole lever should be positioned behind the metal bracket on the buttonhole foot, as shown in the illustration. a Gently hold the end of the upper thread, and then start sewing. * Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. * If the automatic thread cutting setting is selected before sewing, the machine will automatically cut the thread at the end of stitching.
SEWING THE STITCHES c Position the fabric so that the opening of the pocket moves toward you during sewing. Hold the outside frame of the buttonhole foot toward the back with your finger, check the first needle drop point, and then lower the presser foot. e Gently hold the end of the upper thread, and then start sewing. * Once sewing is completed, the machine automatically sews reinforcement stitches, then stops.
SEWING THE STITCHES Button Sewing Buttons with 2 or 4 holes can be sewn on. Note Make sure that the automatic thread cutting setting is not selected when sewing on buttons. Stitch Key Presser Foot Stitch Name Button sewing Stitch width [mm (inch.)] Applications Attaching buttons Press f b Raise the presser foot lever, and remove the flat bed attachment. c Lower the feed dog position switch to lower the feed dogs. . Auto. Manual Auto. Manual 3.5 (1/8) 2.5 - 4.
SEWING THE STITCHES ■ Attaching a 4-Hole Button Sew the two holes toward the front. Then, raise the presser foot, move the fabric so that the needle goes into the back two holes, and then sew them in the same way. b When sewing is finished, pull the two ends of the upper thread between the button and the fabric, wind them around the shank, and then tie them together.
SEWING THE STITCHES d Use the eyelet punch to cut a hole in the center of the stitching. c Press , and then attach presser foot “N”. Multi-Directional Sewing (Straight Stitch and Zigzag Stitch) Use these stitch patterns to attach patches or emblems to pant legs, shirt sleeves, etc. d Insert the needle into the fabric at the starting point of the stitching, and then sew seam 1. Utility Stitches For details on the stitch patterns, refer to the “STITCH SETTING CHART” at the end of this manual.
SEWING THE STITCHES g Press , and then sew seam 4. c * The fabric will move sideways, so guide the fabric with your hands to sew straight. Press open the seam allowance, align the seam with the center of the zipper, and then baste the zipper in place. b a a c a Wrong side of fabric b Basting c Zipper teeth Memo Zigzag stitches can also be used with multi-directional sewing.
SEWING THE STITCHES ■ Side Zipper Use for side zippers on skirts or dresses. a Press d . Remove presser foot “J”, and then attach the presser foot holder to the pin on the right side of zipper foot “I”. a * Be sure to select the straight stitch with the middle needle position. c b a Right side b Left side c Needle drop point CAUTION Attach presser foot “J”, sew straight stitches to the zipper opening, and then sew basting stitches to the edge of the fabric.
SEWING THE STITCHES h Close the zipper, turn the fabric over so that the surface faces up, and then baste the other side of the zipper to the fabric. c a b d a b c d i Front of garment (wrong side of fabric) Back of garment (surface of fabric) Basting Front of garment (surface of fabric) Remove the presser foot, and then attach the pin on the left side of the zipper foot to the presser foot holder.
4 Chapter 4 Character/ Decorative Stitches SELECTING STITCH PATTERNS...........................................................88 ■ Stitch Selection Screens .......................................................................................................... 88 Selecting Decorative Stitch Patterns/7 mm Decorative Stitch Patterns/Satin Stitch Patterns/ 7 mm Satin Stitch Patterns/Cross Stitch Patterns/Utility Decorative Stitch Patterns ..............89 Alphabet Patterns..............................
SELECTING STITCH PATTERNS SELECTING STITCH PATTERNS ■ Stitch Selection Screens Press b e h to display the screen shown below.
SELECTING STITCH PATTERNS Selecting Decorative Stitch Patterns/ 7 mm Decorative Stitch Patterns/ Satin Stitch Patterns/ 7 mm Satin Stitch Patterns/Cross Stitch Patterns/Utility Decorative Stitch Patterns a Press c To combine patterns, select the next pattern. * Press to check the selected pattern combination. * If the wrong pattern was selected, press to erase the pattern, and then select the new stitch pattern. , and then press the key for the category containing the pattern that you want to sew.
SELECTING STITCH PATTERNS b Press to display a selection b Press . c Press . d Press , then screen of characters, and then select a character. Repeat this step until you have selected all of the characters. * If a wrong character was selected, press to erase the character, and then select the new character. * To select a different character style, press , and then select the new character style. * Press to check the selected characters.
SEWING STITCH PATTERNS SEWING STITCH PATTERNS Sewing Attractive Finishes Note • To achieve the best results when sewing character/decorative stitches, check the table below for the proper fabric/ needle/thread combinations. • Other factors, such as the type or thickness of the fabric being sewn or the type of stabilizer material used, also affect the stitching. Therefore, be sure to sew a few trial stitches before sewing your project.
SEWING STITCH PATTERNS e Press the “Start/Stop” button to stop the machine, and then press the “Reverse/ Reinforcement Stitch” button to sew reinforcement stitches. Adjusting Patterns Depending on the type and thickness of the fabric being sewn, the sewing speed, whether or not stabilizer material is used, etc., the desired result may not be achieved. If this occurs, press , and then perform the following adjustment using the same sewing conditions as those used for your project.
SEWING STITCH PATTERNS d Press . e Sew the pattern again. If the pattern still is not sewn correctly, adjust it again. Continue making adjustments until the pattern is sewn correctly. Memo You can sew with the setting screen on the display. f After the pattern is sewn correctly, quit making adjustments. Press to return to the previous screen. Note The adjustment made will remain until changed again. If the pattern is bunched together: If the pattern is stretched: Press in the FINE ADJUST VERTI.
EDITING STITCH PATTERNS EDITING STITCH PATTERNS Using the editing functions, you can change the patterns in a variety of ways, such as resizing them or flipping them to create a mirror image. Memo Depending on the pattern that is selected, some editing functions may not be available. a b f e c d i j k g m h n l ■ Key Functions No. 94 Key Name Function Page 45 a Screen lock key Press this key to lock the screen.
EDITING STITCH PATTERNS Changing the Pattern Size After selecting a stitch pattern, press desired size is selected. Creating a Vertical Mirror Image until the After selecting a stitch pattern, press pattern vertically. to flip the Memo • Stitch patterns entered after the pattern size was changed are added at the selected size until it is changed again. • You cannot change the size of stitch patterns once they have been combined.
EDITING STITCH PATTERNS Selecting a Single/Repeating Pattern Press to select whether the pattern is sewn repeatedly or once. Changing the Thread Density (Satin Stitch Patterns Only) After selecting a stitch pattern, press desired stitching density is selected. CAUTION Memo If you press until the while sewing, the key changes to and the machine will sew one copy of the pattern, then automatically stop. • If the stitches bunch when thread density is changed to , return the thread density to .
COMBINING STITCH PATTERNS COMBINING STITCH PATTERNS You can combine many varieties of stitch patterns, such as character stitches, cross stitches, satin stitches, or stitches you design with MY CUSTOM STITCH function (see chapter 7 for information about MY CUSTOM STITCH). You can also combine stitch patterns of different sizes, mirror image stitch patterns, and others. Before Combining Patterns Note • When stitch patterns are combined, the machine is automatically set to sew the pattern once.
COMBINING STITCH PATTERNS d Press . Memo • Press to erase the last pattern entered. Patterns are erased one at a time. • If the entire combined pattern cannot be displayed, press to view an image of the pattern. Press to return to the previous screen. e Press . → The image of the pattern appears. f To repeatedly sew the pattern combination, press so that it appears as .
COMBINING STITCH PATTERNS a Press d . To repeatedly sew the pattern combination, press so that it appears as . → The combination appears as a repeating pattern. b Press . Combining Stitch Patterns of Different Orientations Character/Decorative Stitches Example: 4 → The larger size pattern appears. c Press again, and then press appears as so that it a Press . . → The second pattern is displayed in the smaller size.
COMBINING STITCH PATTERNS b c Press Press Combining Stitch Patterns of Different Lengths . again, and then press appears as a Press b Press . so that it . , and then press it appears as once so that . → The second pattern is flipped on a vertical axis. d To repeatedly sew the pattern combination, press so that it appears as . → The pattern is displayed with a length of 4. → The combination appears as a repeating pattern.
COMBINING STITCH PATTERNS c Press again, and then press times so that it appears as three . Creating Step Patterns (7 mm Satin Stitch Patterns Only) Stitch patterns that are shifted to create a step-shaped pattern are called step patterns. Step patterns can be created by using shift 7 mm satin stitch patterns. and to Press once to move the stitch pattern to the left by half the width of the stitch pattern. Press once to move the stitch pattern to the right by half the width of the stitch pattern.
COMBINING STITCH PATTERNS b Press , and then press ■ Examples of Pattern Combinations . → → → → → → → → → → → → → → → → → → → → → → → → The next pattern is moved to the right. c d Press Press again, and then press so that it appears as . . → The combination appears as a repeating pattern.
USING THE MEMORY FUNCTION USING THE MEMORY FUNCTION Stitch Data Precautions Observe the following precautions when using stitch data other than that created and saved in this machine. ■ Types of Stitch Data That Can Be Used • Only .pmu stitch data files can be used with this machine. Using data other than that created using this machine may cause the machine to malfunction. Saving Stitch Patterns in the Machine’s Memory You can save often-used stitch patterns in the machine’s memory.
USING THE MEMORY FUNCTION ■ If the Memory Is Full If this screen appears while you are trying to save a pattern on the machine’s memory, the memory is too full to hold the currently selected stitch pattern. To save the stitch pattern in the machine’s memory, you have to delete a previously saved stitch pattern. a Press b Select a stitch pattern to be deleted. * Press to display the pattern saved in that pocket.
USING THE MEMORY FUNCTION d Press . a * If you decide not to delete the stitch pattern, press . Plug the USB cable connectors into the corresponding USB ports on the computer and on the machine. * The USB cable can be plugged into the USB ports on the computer and machine whether or not they are turned on. a b b a → The old stitch pattern is deleted, and the new stitch pattern is automatically saved.
USING THE MEMORY FUNCTION c Press . → Press to return to the previous screen without saving the stitch pattern. Retrieving Stitch Patterns from the Machine’s Memory a → The stitch pattern is temporarily saved to “Removable Disk” under “My Computer”. d Select the stitch pattern’s .pmu file in “Removable Disk”, and copy the file to the computer. Press . → The pocket selection screen appears. b Select a stitch pattern to be retrieved. * Press so that the pattern saved in that pocket appears.
USING THE MEMORY FUNCTION c Press * Press c . Move/copy the pattern data to “Removable Disk”. to delete the stitch pattern. → Stitch pattern data in “Removable Disk” is written to the machine. → The selected stitch pattern is retrieved and the sewing screen appears. Note • While data is being written, do not disconnect the USB cable. • Do not create folders within “Removable Disk”. Since folders are not displayed, stitch pattern data within folders cannot be retrieved.
USING THE MEMORY FUNCTION e Select a stitch pattern to be retrieved. * Press so that the pattern saved in that pocket appears. If the entire saved stitch pattern cannot be displayed, press to view the entire stitch pattern. * Press to return to the previous screen without saving the stitch pattern. a a Pockets holding saved stitch patterns f Press * Press . to delete the stitch pattern. The selected stitch pattern is retrieved and the sewing screen appears.
5 Chapter 5 Embroidery BEFORE EMBROIDERING ............................110 SEWING AN EMBROIDERING PATTERN .... 131 Attaching Embroidery Foot “U”...................................... 111 Sewing Attractive Finishes ...............................................131 Attaching the Embroidery Unit ....................................... 112 ■ Embroidery Needle Plate Cover ..............................................131 ■ Removing the Embroidery Unit ..............................................
BEFORE EMBROIDERING BEFORE EMBROIDERING The embroidering procedures are listed below. 9 6, 8 7 3 1, 2 Step # * 110 5 4 Operation Page 1 Attach embroidery foot “U”. 2 Insert a 75/11 home sewing machine needle.* 111 34 3 Attach the embroidery unit. 112 4 Wind the bobbin with embroidery bobbin thread, and then set the bobbin. 24,27 5 Attach stabilizer material to the fabric, and then hoop it in the embroidery frame. 6 Turn on the machine, and then select the embroidery pattern.
BEFORE EMBROIDERING Attaching Embroidery Foot “U” e Use the included screwdriver to loosen the presser foot holder screw, and then remove the presser foot holder. CAUTION a • When attaching a presser foot, always press in the operation panel. You may accidentally press the “Start/Stop” button and possibly cause injury. • Be sure to use embroidery foot “U” when doing embroidery.
BEFORE EMBROIDERING Attaching the Embroidery Unit c Insert the embroidery unit connector into the connection port, and then lightly push in the embroidery unit until it snaps into place. CAUTION • Do not move the machine with the embroidery unit attached. The embroidery unit could fall off and cause injury. • Keep your hands and foreign objects away from the embroidery carriage and frame when the machine is embroidering. Otherwise, injury may result.
BEFORE EMBROIDERING e Press ■ Removing the Embroidery Unit . a Press or , and then press . → The carriage moves to the storage position. CAUTION • Always remove the embroidery frame before pressing → The carriage moves to its initial position. . Otherwise, the frame may strike the embroidery foot, and possibly cause injury. • The embroidery unit will not fit in the storage box/case if this step is not done.
SELECTING EMBROIDERY PATTERNS SELECTING EMBROIDERY PATTERNS ■ Copyright Information The embroidery patterns stored in the machine and on embroidery cards (sold separately) are intended for private use only. Any public or commercial use of copyrighted patterns is an infringement of copyright law and is strictly prohibited. ■ Pattern Selection Screens There are many character and decorative embroidery patterns stored in the machine’s memory.
SELECTING EMBROIDERY PATTERNS One-point Patterns/Floral Patterns d Continue with “VIEWING THE SEWING SCREEN” on page 119. * To select a different embroidery pattern, press a Select a type of embroidery pattern. . (After a confirmation message to delete the selected pattern appears, the pattern selection screen appears.) b Select an embroidery pattern. 5 Embroidery c Press * Press . to view an image of the embroidery pattern. → The sewing screen appears.
SELECTING EMBROIDERY PATTERNS Alphabet Patterns a Press c Press to display a selection screen of characters, and then select a character to be embroidered. . * To change the size, press until the desired size is selected. * If a wrong character was selected, press to erase the character. * If the pattern is too small to see clearly, you can use key to check it. * Press b to display all entered characters. Select a character style.
SELECTING EMBROIDERY PATTERNS e Continue with “VIEWING THE SEWING SCREEN” on page 119. * To select a different character, press . (After a confirmation message to delete the selected pattern appears, the pattern selection screen appears.) Frame Patterns a Press b In the top part of the screen, select a frame shape. In the bottom part of the screen, select a frame pattern. . a b a Frame shapes b Frame patterns c Press . * Press to view an image of the embroidery 5 Embroidery pattern.
SELECTING EMBROIDERY PATTERNS d Continue with “VIEWING THE SEWING SCREEN” on page 119. b Press . * To select a different embroidery pattern, press . (After a confirmation message to delete the selected pattern appears, the pattern selection screen appears.) → The pattern selection screen for the card appears. c Follow the procedure described in “Onepoint Patterns/Floral Patterns” on page 115 to select a pattern.
VIEWING THE SEWING SCREEN VIEWING THE SEWING SCREEN Using the editing keys, you can change the patterns in a variety of ways, such as resizing them or rotating them. a e f d j a g k b Shows the code for the appropriate presser foot. When embroidering, be sure to use embroidery foot “U”. b Shows the embroidering area for the extra large frame (26 cm × 16 cm (approx. 10-1/4 inches × 6-1/4 inches)). c Shows the selected pattern.
PREPARING THE FABRIC PREPARING THE FABRIC CAUTION • Use fabrics with a thickness of less than 3 mm (approx. 1/8 inch). Using fabrics thicker than 3 mm (approx. 1/8 inch) may cause the needle to break. • When using layers with thicker batting etc., you can sew more attractive embroidery by adjusting the embroidery presser foot height in the embroidery settings screen (see below).
PREPARING THE FABRIC Hooping Fabric in the Embroidery Frame ■ Types of Embroidery Frames Extra Large Embroidering area: 26 cm × 16 cm (approx. 10 - 1/4 inches × 6 - 1/4 inches) Large Medium (Sold Separately) Embroidering area: 18 cm × 13 cm (approx. 7 inches × 5 inches) Use when embroidering connected Use when embroidering patterns or combined characters or patterns, with a size less than 18 cm × 13 cm (approx. 7 inches × 5 inches). or when embroidering large patterns.
PREPARING THE FABRIC d ■ Inserting the Fabric Note Gently stretch the fabric, and then securely tighten the frame adjustment screw so that the fabric remains stretched. If the fabric is not taut, the pattern may be misaligned or the fabric may pucker. Follow the procedure described below to gently stretch the fabric in the embroidery frame so that the fabric is not loose. In addition, be sure to work on a level surface when hooping the fabric in the embroidery frame.
PREPARING THE FABRIC b Place the embroidery sheet in the inner frame, and then align the guide lines on the embroidery sheet with the marks on the fabric. b a ■ Embroidering Small Fabrics When embroidering small pieces of fabric, use temporary spray adhesive to attach the small piece of the fabric to stabilizer, and then hoop the stabilizer in the embroidery frame. If you do not wish to use a temporary spray adhesive, attach the fabric to the stabilizer with basting stitches.
ATTACHING THE EMBROIDERY FRAME ATTACHING THE EMBROIDERY FRAME Note Before attaching the embroidery frame, set the bobbin. a Press the “Presser Foot Lifter” button to raise the presser foot. b Raise the frame-securing lever. e CAUTION a • If the frame-securing lever is not lowered, the embroidery pattern may not sew out correctly or the presser foot may strike the embroidery frame and cause injury.
EDITING THE PATTERN EDITING THE PATTERN CAUTION • After the size of the pattern has been changed, check the icons for the embroidery frames that can be used and use only the indicated frames. If a frame other those indicated is used, the presser foot may strike the embroidery frame, possibly causing injuries. Changing the Embroidery Frame Display a Press b Press . or in the “EMBROIDERY FRAME DISPLAY” on P. 2 of the screen to select how the embroidery frame is displayed.
EDITING THE PATTERN b Press b to move the pattern. Press . * Each press of the key rotates the pattern 90 degrees. * Press to move the pattern in the direction of the arrow on the key. * Press to center the pattern. a a a Degree of rotation Note • If a large-size embroidery pattern a Distance from the center Press c selected, . Press . c Press . Changing the Pattern Size a 126 , allowing the pattern to be rotated in 1 degree increments.
EDITING THE PATTERN b c Press . Creating a Horizontal Mirror Image a Press . b Press . Change the size of the pattern. * Press to reduce the size of the pattern. * Press to enlarge the size of the pattern. * Press to return the pattern to its original size. 5 Embroidery a → The key appears as . a Size of the pattern Memo • Some patterns or characters can be enlarged more than others. • Some patterns or characters can be enlarged to a greater degree if they are rotated 90 degrees.
EDITING THE PATTERN Changing the Stitching Density (Alphabet and Frame Patterns Only) a Press Changing the Color of Single Characters Combined alphabet patterns can be sewn with each letter in a different color. If “MULTI COLOR” is set, the machine stops after each character is sewn so that the thread can be changed to one of a different color. . a b * Press to reduce the stitching density. * Press to increase the stitching density. → The key appears as b Coarse (stitches farther apart) 128 .
CHECKING THE PATTERN CHECKING THE PATTERN Checking the Embroidering Position b Press to select the position to be checked. The embroidery frame is moved to indicate the embroidering position. Closely watch the frame to check that the pattern will be sewn at the correct place. a Press . → The frame moves to indicate the selected position. Memo 5 To view the entire embroidering area, press . Embroidery The frame moves to indicate the entire embroidering area.
CHECKING THE PATTERN Previewing the Pattern a Press b Press to select the frame used in the preview. * Embroidery frame icons that appear in dashed line cannot be selected. . * Press to enlarge the preview of the embroidery pattern. Memo • Press the “Start/Stop” button to sew the pattern as it appears in this screen. • Patterns with many stitches may take some time to preview. c 130 Press .
SEWING AN EMBROIDERING PATTERN SEWING AN EMBROIDERING PATTERN Sewing Attractive Finishes There are many factors that go into sewing beautiful embroidery. Using the appropriate stabilizer (see page 120) and hooping the fabric in the frame (see page 121) are two important factors mentioned earlier. Another important point is the appropriateness of the needle and thread being used. See the explanation of threads below. Included with this machine are two bobbin cases. Follow the explanation below.
SEWING AN EMBROIDERING PATTERN Sewing Embroidery Patterns Example: c Trim off the excess thread at the beginning of the stitching. If the thread is hidden under the presser foot, raise the presser foot, and then cut the thread. d Press the “Start/Stop” button again to start embroidering.
SEWING AN EMBROIDERING PATTERN Embroidering Appliqué Patterns c There are some patterns which call for an appliqué inside the pattern. When sewing an embroidery pattern with an appliqué, the color sewing order display shows “Appliqué Material”, “Appliqué Position”, “Appliqué”, and then the sewing order of the colors around the appliqué. After sewing is finished, remove the appliqué fabric from the embroidery frame, and then carefully cut along the stitching.
SEWING AN EMBROIDERING PATTERN f Apply a thin layer of adhesive or spray adhesive to the back of the appliqué piece, and then attach it to the base fabric at the appliqué position sewn in step e . If the Bobbin Runs Out of Thread If the bobbin begins to run out of thread during embroidering, the machine stops and the following message appears. Replace the bobbin thread according to the following procedure. If very little sewing remains, press to sew 10 stitches without rethreading the machine.
SEWING AN EMBROIDERING PATTERN f g Press the “Presser Foot Lifter” button to lower the presser foot. d Press , or to move the needle back 2 or 3 stitches before the point To return to the point in the pattern where sewing was stopped, follow steps c through f in the next section. where the thread broke. * If you cannot return to the point where the thread broke, press Memo to select a color and return to the beginning of that color.
SEWING AN EMBROIDERING PATTERN Restarting from the Beginning a Press . Adjusting the Thread Tension When embroidering, the thread tension should be set so that the upper thread can be slightly visible from the wrong side of the fabric. With some fabric and thread combinations, the thread tension may need to be adjusted. ■ Correct Thread Tension The upper thread can be slightly visible from the wrong side of the fabric.
SEWING AN EMBROIDERING PATTERN ■ If the Upper Thread Is Too Tight The upper thread is too tight when the bobbin thread is visible from the right side of the fabric. a Press b Press . in the tension display. * Each press of the key increases the value and tightens the upper thread tension. Right side of fabric a Press Wrong side of fabric . c Press .
SEWING AN EMBROIDERING PATTERN Changing the Embroidering Speed a Press b Press . or in the “MAX EMBROIDERY SPEED” display on P. 2 of the screen. Changing the Thread Color Display From the following, select the thread color that appears in the embroidery color order display. You can change the thread color display on embroidery screen, to the thread color name, each time to embroider or the thread number. * You can choose from 3 embroidering speed levels.
SEWING AN EMBROIDERING PATTERN Example: a Press b Press Displaying the thread number of “EMBROIDERY” d Press . . or beside on P. 2 of the screen to select the “#123”. → The thread color display is changed. → “EMBROIDERY” appears at the bottom. c Press to select the thread brand. 5 Embroidery Memo Colors on the screen may vary slightly from actual spool colors.
USING THE MEMORY FUNCTION USING THE MEMORY FUNCTION Embroidery Data Precautions Observe the following precautions when using embroidery data other than that created and saved in this machine. CAUTION • When using embroidery data other than our original patterns, the thread or needle may break when sewing with a stitch density that is too fine or when sewing three or more overlapping stitches. In that case, use one of our original data design systems to edit the embroidery data.
USING THE MEMORY FUNCTION Saving Embroidery Patterns in the Machine’s Memory You can save embroidery patterns that you have customized and will use often, for example, your name or other pattern combinations, patterns that have been rotated or resized, or patterns that have had their embroidering position changed.
USING THE MEMORY FUNCTION c Press . Saving Embroidery Patterns to the Computer Using the included USB cable, connect the sewing machine to your computer so that embroidery patterns can be retrieved from and saved to your computer. c Note Do not turn off the machine while the “Saving” screen is displayed, otherwise you may lose the pattern that you are saving.
USING THE MEMORY FUNCTION b With the pattern that you want to save displayed in the sewing screen, press . Retrieving Patterns from the Machine’s Memory a c Press * Press Press . . to return to the previous screen without saving the pattern. → The pocket selection screen appears. b Select a pattern to be retrieved. . 5 Embroidery * Press to display the pattern saved in the selected pocket.
USING THE MEMORY FUNCTION c Press . Retrieving Patterns from the Computer a Plug the USB cable connectors into the corresponding USB ports on the computer and on the machine (see page 142). b The “Removable Disk” icon appears in “My Computer” on the computer. c Copy the pattern data to “Removable Disk”. → The sewing screen appears. → Pattern data in “Removable Disk” is written to the machine. Note • While data is being written, do not disconnect the USB cable.
USING THE MEMORY FUNCTION d Press f . Press . a The pattern selection screen appears. e a Amount of memory used by the selected pattern Select an embroidery pattern to be retrieved. The sewing screen appears. * If you decide not to retrieve the pattern, press .
EMBROIDERY APPLICATIONS EMBROIDERY APPLICATIONS Using a Frame Pattern to Make an Appliqué (1) c Apply a thin layer of fabric glue or temporary spray adhesive to the back of the appliqué piece cut out in step a, and then attach the appliqué to the base fabric within the outline. d Select the satin stitch frame pattern of the same shape, and then embroider over the appliqué and base fabric from step c. You can use frame patterns of the same size and shape to create an appliqué.
EMBROIDERY APPLICATIONS Using a Frame Pattern to Make an Appliqué (2) d Remove the embroidery frame from the machine, and then cut around the outside of the stitching. This is a second method for making appliqués using embroidery patterns. With this method, there is no need to change the fabric in the embroidery frame. To make the appliqué, embroider one pattern with a straight stitch and the other pattern with a satin stitch.
EMBROIDERY APPLICATIONS 148
6 Chapter 6 Embroidery Edit AVAILABLE EDITING FUNCTIONS...................................................150 ■ Combined Patterns ........................................................................................................150 ■ Move Patterns ...............................................................................................................150 ■ Rotate Patterns ..............................................................................................................
AVAILABLE EDITING FUNCTIONS AVAILABLE EDITING FUNCTIONS With the Embroidery Edit functions, you can change the size of patterns, rotate patterns, adjust the character spacing and layout, and perform many other editing operations. In addition, characters and patterns can be combined and rearranged within the 26 cm × 16 cm (approx. 10 - 1/4 inches × 6 - 1/4 inches) embroidering area. With the Embroidery Edit functions, you can combine various patterns and characters to create original patches and embroidery.
SELECTING PATTERNS TO EDIT SELECTING PATTERNS TO EDIT Attach the embroidery unit, prepare the machine for embroidering according to the instructions on page 110, and then press to display the screen shown below.
SELECTING PATTERNS TO EDIT c Press . Alphabet Patterns With the Embroidery Edit functions, you can edit the appearance of a character at the same time that you enter it. a Press b Select the character style, and then enter the characters. . → The selected pattern appears in the screen. d Continue with “EDITING PATTERNS” on page 154. * For details on selecting characters, see page 116. * Press characters.
SELECTING PATTERNS TO EDIT c Press to change the layout of the f Press . pattern. a → The embroidery edit screen appears. a Layout of characters Memo The layout of the characters appears in the upper-left corner of the screen. d g Continue with see “EDITING PATTERNS” on page 154. Select the layout. 6 Embroidery Edit → The displayed character layout changes. e Press to return to the previous screen.
EDITING PATTERNS EDITING PATTERNS e a f g b c d i h j k l a b c d m n o Shows the size of the entire combined pattern. Shows the size of the pattern currently selected. Shows the distance from the center of frame. Shows the degree of rotation for the selected pattern. ■ Key Functions No. Key Name Function Page e Image key Press this key to display a preview of the embroidery pattern.
EDITING PATTERNS b Moving the Pattern Select the angle that the pattern is rotated. * Press to rotate the pattern 90 degrees to the left. Press to move the pattern in the direction * Press to rotate the pattern 90 degrees to the right. shown on the key. Press * Press to center the pattern. to rotate the pattern 10 degrees to the left. * Press to rotate the pattern 10 degrees to the right. * Press to rotate the pattern 1 degree to the left.
EDITING PATTERNS Changing the Size of the Pattern a Press . c b Press . Select the direction in which the size is changed. * Press to reduce the pattern proportionately. * Press to enlarge the pattern proportionately. * Press to reduce the pattern vertically. * Press to enlarge the pattern vertically. * Press to reduce the pattern horizontally. * Press to enlarge the pattern horizontally. * Press to return the pattern to its original size.
EDITING PATTERNS Changing the Configuration of Character Patterns a b Press Changing the Character Spacing a Press . b Press or * Press to widen the character spacing. * Press to tighten the character spacing. * Press to return the pattern to its original . Select the layout. * After selecting an arc layout, press expand the arc. * After selecting an arc layout, press reduce the arc. to to . spacing. 6 Embroidery Edit c Press * Press d Press to adjust the position.
EDITING PATTERNS Changing the Color of Each Character in a Pattern Press so that it appears as . The machine will stop after each character is embroidered so the thread can be changed. b Press to embroider the edited pattern. * Press to return to the embroidery edit screen. Memo For details on combining patterns, see page 159. Memo The multi color settings can also be set from the sewing screen. For details, see page 128. After Editing a 158 Press .
COMBINING PATTERNS COMBINING PATTERNS This section will describe how to combine characters and embroidery patterns. Editing Combined Patterns a Press c Press d Press . . . 6 Press on P. 1 of the screen.
COMBINING PATTERNS e Press g . Enter “WELCOME”. * For details on selecting characters, see page 116. * After entering “W“, press to change the size to M, then enter the remaining characters. * Press to view an image of all entered characters. f Press . h 160 Press .
COMBINING PATTERNS i Press to change the layout of the characters. k Press l Press . * For details, see page 157. j Press . to adjust the position of the characters.
USING THE MEMORY FUNCTION Sewing Combined Patterns b Embroider according to the color order on the right side of the screen. Combined patterns will be embroidered in the order that they were entered. In this example, the embroider order will be as follows. For details, see “Sewing Embroidery Patterns” on page 132. → a Press . c Embroider . → When “WELCOME” is completed, the message “Finished sewing” appears. Press to return to the previous screen.
7 Chapter 7 MY CUSTOM STITCH DESIGNING A STITCH......................................................................164 ■ Examples of Custom Stitches .........................................................................................165 ENTERING STITCH DATA .................................................................166 ■ Key Functions ................................................................................................................166 ■ Moving a Point ........................
DESIGNING A STITCH DESIGNING A STITCH By using the MY CUSTOM STITCH™ function, you can register stitches you have created yourself. b Decide the spacing of the stitch. * By adjusting the spacing of a stitch, you can create various patterns with one stitch. Memo • Stitches that you create with MY CUSTOM STITCH™ can be a maximum of 7 mm (approx. 9/32 inch) wide and 37 mm (approx. 1-1/3 inches) long.
DESIGNING A STITCH ■ Examples of Custom Stitches Stitch Stitch Stitch Stitch Stitch Stitch Stitch Stitch Stitch 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 12 18 22 23 21 17 14 12 9 6 3 1 3 6 0 0 3 6 10 13 14 13 11 13 14 13 10 6 3 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 12 41 43 40 41 38 35 32 30 32 35 41 45 47 44 0 0 4 7 11 13 14 13 10 6 3 0 0 4 7 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 45
ENTERING STITCH DATA ENTERING STITCH DATA ■ Key Functions d c b a f e h g k i j m l No. a This area displays the stitch being created. b Displays the number of the present set point over the total number of points in the stitch. c Displays the y-coordinate of Display over the x-coordinate of . Key Name Explanation Page d Grid direction key e Single/triple stitching key Press this key to select whether one or three stitches will be sewn between two points.
ENTERING STITCH DATA a Press b Press . d Press e Select whether one stitch or three stitches will be sewn between the first two points. to add the point indicated by . . * To sew three stitches, press the key so that it appears as Use c to move of the first point on the grid sheet. → Press sheet. . to the coordinates f Use to move to the second point to change the direction of the grid and press .
ENTERING STITCH DATA h Press . ■ Moving a Point a Press or to move that you want to move. * To move to the first point, press . * To move to the last point, press . * You can also move by using the touch pen. Memo • If you have entered points that are too close together, the fabric may not feed properly. Edit the stitch data to leave a larger space between points.
ENTERING STITCH DATA ■ Moving Part or All of the Design a Press d Press or to move the section. Press or to move to the first point of the section that you want to move. * To move to the first point, press . * To move to the last point, press . * You can also move b c Press by using the touch pen. . . → The section will be moved. 7 MY CUSTOM STITCH → The selected point and all points that were entered after it are selected.
ENTERING STITCH DATA ■ Inserting New Points a Press or to move to a place on the design where you want to add a new point. * To move to the first point, press . * To move to the last point, press . * You can also move b Press by using the touch pen. . → A new point is entered and 170 moves to it. c Use to move the point.
USING STORED CUSTOM STITCHES USING STORED CUSTOM STITCHES Saving Custom Stitches in the Machine’s Memory b Press . * Press to return to the previous screen without saving the custom stitch. Stitch patterns created using the MY CUSTOM STITCH™ function can be saved for later use. The machine’s memory can hold up to 16 custom stitches. Note Do not turn off the machine while the “Saving” screen is displayed, otherwise you may lose the custom stitches that you are saving.
USING STORED CUSTOM STITCHES b d Select a custom stitch to be deleted. * Press to display the custom stitch saved in that pocket. If the entire saved custom stitch cannot be displayed, press * Press Press . * If you decide not to delete the custom stitch, press . to view the entire custom stitch. if you do not want to delete the custom stitch. a → The old custom stitch is deleted, and the new custom stitch is automatically saved. a Pockets holding saved custom stitches c Press .
USING STORED CUSTOM STITCHES Retrieving Custom Stitches from the Machine’s Memory a Press c Press * Press . to delete the custom stitch. . → The selected custom stitch is retrieved and the sewing screen appears. → The pocket selection screen appears. b Retrieving Custom Stitches from the Computer Select a custom stitch to be retrieved. * Press so that the custom stitch saved in that pocket appears.
USING STORED CUSTOM STITCHES 174
Chapter 8 Appendix CARE AND MAINTENANCE ..............................................................176 Cleaning the LCD ..................................................................................................176 Cleaning the Machine Casing ................................................................................176 Cleaning the Race .................................................................................................
CARE AND MAINTENANCE CARE AND MAINTENANCE CAUTION • Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may result. h Cleaning the LCD Use the included cleaning brush or a vacuum cleaner to remove any lint and dust from the race and its surrounding area. If the surface of the LCD is dirty, lightly wipe it with a soft dry cloth. Do not use organic solvents or detergents.
CARE AND MAINTENANCE j Insert the tabs on the needle plate cover into the needle plate, and then slide the cover back into place. Adjusting the Alternate Bobbin Case (with no marking) The alternate bobbin case (with no marking) can be easily adjusted when bobbin tension changes are required to accommodate different bobbin threads. To adjust the bobbin tension for embroidery function, using the alternate bobbin case (with no marking), turn the slotted-head (-) screw with a (small) screwdriver.
ADJUSTING THE SCREEN ADJUSTING THE SCREEN Screen Visibility Is Low If the screen is difficult to read when the machine is turned on, follow the procedure described below. a Turn off the machine, hold your finger anywhere on the screen, and then turn the machine on. Touch Panel Is Malfunctioning If the screen does not respond correctly when a key is pressed (the machine does not perform the operation or performs a different operation), follow the procedure described below to make the proper adjustments.
ADJUSTING THE SCREEN c Using the included touch pen, lightly touch the center of each ×, in order from 1 to 5. * If the buzzer sounds one time after you press number 5, the operation is finished, and “SUCESS” appears on the screen. If the buzzer sounds twice, there was an error. In this case, repeat the steps above. Note Only use the included touch pen to touch the screen. Do not use a mechanical pencil, screwdriver or any other hard or sharp object.
TROUBLESHOOTING TROUBLESHOOTING If you have a minor problem with your sewing machine, check the following solutions. If the solutions suggested do not correct the problem, contact your authorized dealer. Memo This machine is equipped with a simple troubleshooting feature that can be used in case minor problems occur during sewing. Press , and then press to display a list of problems. Press the key for the appropriate problem, and then check for the causes that are displayed.
TROUBLESHOOTING Problem High-pitched sound while sewing Cannot thread the needle Cause Page Dust or lint is caught in the feed dogs. Remove the dust or lint. 176 Pieces of thread are caught in the race (bobbin case). Clean the race (bobbin case). 176 The upper threading is incorrect. Check the procedure for threading the machine and rethread it correctly. 28 There are scratches on the race (bobbin case). Replace the race (bobbin case), or consult your authorized dealer.
TROUBLESHOOTING Problem Needle breaks Fabric does not feed through the machine Machine does not operate Embroidery unit does not operate LCD cannot be read Cause Solution Page The needle is installed incorrectly. Reinstall the needle correctly. The needle clamp screw is not tightened. Tighten the needle clamp screw. 34 35 The needle is bent or blunt. Replace the needle with a new one. 34 The thread or needle is not suitable for the type of fabric being sewn.
ERROR MESSAGES ERROR MESSAGES If the “Start/Stop button” or the “Reverse/Reinforcement Stitch” button is pressed before the machine is correctly set up or if an incorrect operation is performed, the machine stops and informs you of the error with an alarm and an error message. If an error message appears, correct the problem according to the instructions in the message. (The message that is displayed can be cancelled either by pressing or performing the operation correctly.
ERROR MESSAGES This message is displayed when the pattern selected in embroidery mode is larger than the embroidering area of the medium embroidery frame while the small or medium embroidery frame is attached. This message is displayed when the “Start/Stop” button is pressed while a pattern is being edited in embroidery edit mode. This message is displayed when the upper thread is broken or not threaded correctly, and the “Start/ Stop” button or the “Reverse/ Reinforcement Stitch” button is pressed.
ERROR MESSAGES This message is displayed when more than 12 patterns have been saved in “Removable Disk”. This message is displayed when a stitch other than a buttonhole stitch is selected and the “Start/Stop” button or the “Reverse/ Reinforcement Stitch” button is pressed while the buttonhole lever is lowered. This message is displayed when the memory is full and the stitch or pattern cannot be saved.
ERROR MESSAGES This message is displayed when the bobbin thread is running out. This message is displayed when you try to retrieve a pattern downloaded as one for a different machine. This message is displayed when the bobbin is being wound, and the motor locks because the thread is tangled, etc. This message is displayed when the combined character pattern in embroidery mode is too large for the embroidery frame. You can rotate the pattern 90 degrees to continue combining characters.
ERROR MESSAGES This message is displayed when the motor locks up due to tangled thread or for other reasons related to thread delivery. This message is displayed when a button on the screen is pressed while the needle is lowered. If data is being written to or deleted from “Removable Disk” on the connected computer during sewing, the machine stops and this message is displayed. When the USB transmission is completed, press the “Start/Stop” button to continue sewing.
SPECIFICATIONS SPECIFICATIONS Item Sewing Machine Embroidery Unit 188 Specification Dimensions 51.1 cm (W) × 30.5 cm (H) × 25.8 cm (D) (approx. 20-1/8 inches (W) × 12 inches (H) × 10-1/8 inches (D)) Case dimensions 58.2 cm (W) × 31.9 cm (H) × 28.4 cm (D) (approx. 22-7/8 inches (W) × 12-1/2 inches (H) × 11-1/8 inches (D)) Weight 11.2 kg (24.7 lb.) (with case: 13.5 kg (29.8 lb.)) Sewing speed 70 to 1000 stitches per minute Needle Home sewing machine needles (HA × 130) Dimensions 45.
UPGRADING YOUR MACHINE’S SOFTWARE UPGRADING YOUR MACHINE’S SOFTWARE You can use a computer to download software upgrades for your sewing machine. When an upgrade program is available on “ http://solutions.brother.com ”, please download the files following the instructions on the web site and steps below. Note There are two upgrade files. Be sure to download both files successively. Memo • When the machine’s software is upgraded, saved combinations of character and decorative stitches are erased.
UPGRADING YOUR MACHINE’S SOFTWARE h When the following screen appears, upgrading is completed. Press LOAD after saving the upgrade file in the machine. Upgrade complete. Note If an error occurred, an error message appears. At this time, turn the machine off, and then start the procedure again from step a. i 190 Disconnect the USB cable, and turn the machine off, then on again.
STITCH SETTING CHART STITCH SETTING CHART Note When using the twin needle (see page 31), be sure to attach presser foot “J”. Stitch Key Stitch Name Presser Foot Stitch Width [mm (inch)] Applications Stitch Length [mm (inch)] Twin Needle Auto Manual Auto Manual General sewing, gather, pintuck, etc. Reverse stitch is sewn while pressing “Reverse/ Reinforcement Stitch” button. 0.0 (0) 0.0 - 7.0 (0 - 1/4) 2.5 (3/32) 0.2 - 5.0 (1/64 - 3/16) OK (J) General sewing, gather, pintuck, etc.
STITCH SETTING CHART Stitch Key Stitch Name Overcasting stitch Overcasting stitch Stitch Width [mm (inch)] Applications Reinforcing of heavyweight fabric Reinforcing of medium, heavyweight and easily frayed fabrics or decorative stitching.
STITCH SETTING CHART Stitch Key Stitch Name Blind hem stitch Blind hem stitch Presser Foot Stitch Width [mm (inch)] Applications Manual Auto Manual 00 3← − →3 2.0 (1/16) 1.0 - 3.5 (1/16 - 1/8) NO 00 3← − →3 2.0 (1/16) 1.0 - 3.5 (1/16 - 1/8) NO 3.5 (1/8) 2.5 - 7.0 (3/32 - 1/4) 2.5 (3/32) 1.6 - 4.0 (1/16 - 3/16) OK (J) 4.0 (3/16) 0.0 - 7.0 (0 - 1/4) 2.5 (3/32) 0.2 - 4.0 (1/64 - 1/16) OK (J) 5.0 (3/16) 2.5 - 7.0 (3/32 - 1/4) 0.5 (1/32) 0.1 - 1.0 (1/64 - 1/16) OK (J) 7.
STITCH SETTING CHART Stitch Key Stitch Name Applications Hemstitching Decorative hems, triple straight at left Hemstitching Decorative hems, triple straight at center Hemstitching zigzag Decorative hems, top stitching Hemstitching Decorative hems, lace attaching pin stitch Hemstitching Hemstitching Hemstitching Hemstitching 194 Presser Foot Decorative hems Decorative hems daisy stitch Heirloom, decorative hems Heirloom, decorative hems Stitch Width [mm (inch)] Stitch Length [mm (inch)
STITCH SETTING CHART Stitch Key Stitch Name Hemstitching Hemstitching Presser Foot Stitch Width [mm (inch)] Applications Decorative hems, smocking Decorative hems, smocking Stitch Length [mm (inch)] Twin Needle Auto Manual Auto Manual 6.0 (15/ 64) 1.5 - 7.0 (1/16 - 1/4) 1.6 (1/16) 1.0 - 4.0 (1/16 - 3/16) NO 5.0 (3/16) 1.5 - 7.0 (1/16 - 1/4) 1.6 (1/16) 1.0 - 4.0 (1/16 - 3/16) NO 5.0 (3/16) 3.0 - 5.0 (1/8 - 3/16) 0.4 (1/64) 0.2 - 1.0 (1/64 - 1/16) NO 5.5 (7/32) 3.5 - 5.
STITCH SETTING CHART Stitch Key Stitch Name Stitch Width [mm (inch)] Applications Stitch Length [mm (inch)] Twin Needle Auto Manual Auto Manual For attaching appliqué on tubular pieces of fabric and mitering corners — — — — NO Diagonally right up (Straight) For attaching appliqué on tubular pieces of fabric and mitering corners — — — — NO Sideways to left (Straight) For attaching appliqué on tubular pieces of fabric — — — — NO Sideways to right (Straight) For attaching appliq
INDEX INDEX A accessories ....................................................................................11 air vent ...........................................................................................9 alarm ..........................................................................................187 alphabet patterns character/decorative stitches .....................................................89 appliqués ................................................................
INDEX horizontal mirror image key ................................................ 95, 127 I image key .......................................................................... 130, 168 insert key .................................................................................... 170 presser foot code .................................................................. 17, 119 presser foot holder ................................................................. 10, 33 presser foot lever ..................
INDEX thread cutter ............................................................................ 9, 30 thread cutter button ........................................................ 11, 39, 44 thread density key ..................................................... 128, 136, 137 thread guide ................................................................9, 25, 26, 31 thread guide plate ............................................................. 9, 26, 29 thread take-up lever check window .................
English 882-U73 XF0752-001 Printed in Taiwan
