User Manual

Troubleshooting
199
7
Cannot find how to
start ControlCenter4
(Windows
®
).
—
If the icon is not displayed in the task tray, do
one of the following:
 (Windows
®
XP, Windows Vista
®
and
Windows
®
7 users)
Click (Start), All Programs, Brother,
ADS-XXXXX (where XXXXX is your model
name) and then ControlCenter4.
 (Windows
®
8 users)
Click (Brother Utilities), and then click
the drop-down list and select your model name
(if not already selected). Click SCAN in the left
navigation bar, and then click ControlCenter4.
Cannot find
Print
button in
ControlCenter4
(Windows
®
).
— Download the latest driver from the
Brother
Solutions Center at
http://solutions.brother.com/
Cannot start
ControlCenter2.
You have not logged in the computer as
the administrator.
Restart the computer and log in as the
administrator.
Cannot find how to
start ControlCenter2
(Macintosh).
— To start ControlCenter2, click the
(ControlCenter2) icon in the Dock. If the
(ControlCenter2) icon is not displayed in the
Dock, click Go from the Finder menu bar,
Applications, Brother, and then double-click the
(ControlCenter2) icon. The
(ControlCenter2) icon will appear in the Dock.
(ADS-1100W only)
Cannot find how to
configure the settings
to scan from the
Control Panel of the
machine.
— Use Remote Setup or Web Based Management.
See
Set Up the Brother Machine from Your
Computer on page 164 or Start Web Based
Management on page 113.
(ADS-1100W only)
Cannot find IP address
of the machine.
— Start Remote Setup and then select Network in the
folder tree. See
Set Up the Brother Machine from
Your Computer on page 164.
Cannot save the
settings in Remote
Setup or Web Based
Management.
 The machine is processing.
 The machine is being configured
from the machine’s Control Panel.
 Wait until the machine finishes processing and
then try again.
 Stop configuring the machine from the Control
Panel.
Difficulty Cause Suggestions