User Manual

General Information
30
1
Unacceptable Documents 1
 Documents with a carbon sheet attached on the back
 Documents written in pencil
 Documents of uneven thickness, such as envelopes
 Documents with large wrinkles or curls
 Bent or damaged documents
 Documents that use tracing paper
 Documents that use coated paper
 Photographs (photographic paper)
 Documents printed on perforated paper
 Documents printed on unusually-shaped paper (not square or rectangle)
 Documents with photos, notes, or stickers affixed to them
 Documents that use carbonless paper
 Documents that use loose-leaf paper or any paper with holes in it
 Documents with paper clips or staples
 Documents with wet ink
 Fabrics, metallic sheets, Over Head Projector sheets
 Glossy or mirrored media
 Documents that exceed recommended media thicknesses
Receipt Carrier Sheet Information 1
 Use the Receipt Carrier Sheet for a receipt only.
 Use the BR-Receipts application when using the Receipt Carrier Sheet (see Scan Receipts Using
BR-Receipts (Windows
®
) on page 89 or Scan Receipts Using BR-Receipts (Macintosh) on page 101).
 You can fold the receipt into a Z-shape and then insert it into the Receipt Carrier Sheet if the receipt is
longer than the Receipt Carrier Sheet (see
Loading a Receipt on page 37).
 To avoid document jams, do not load the Receipt Carrier Sheet upside down. Refer to the instructions
printed on the Receipt Carrier Sheet itself for more information or see
Loading Documents on page 32.
 To avoid document jams, do not put several small documents into the Receipt Carrier Sheet at the same
time. Insert only one document into the Receipt Carrier Sheet at a time.
 Do not write on the Receipt Carrier Sheet, as the writing may be seen in a scanned receipt. If the Receipt
Carrier Sheet becomes dirty, wipe it with a dry cloth.
 Do not leave any receipt in the Receipt Carrier Sheet for extended periods of time, as the printing on the
receipt may bleed-through onto the Receipt Carrier Sheet.