User Manual

Configuring Your Machine for a Wireless Network
13
3
Configuration 3
Temporarily Using a USB Cable (Recommended) 3
This is the recommended configuration method. For instructions, see the Quick Setup Guide.
When the SSID Is Not Broadcasting 3
a Before configuring your machine, we recommend you write down your wireless network settings. You
will need this information before you continue with the configuration.
Check and record the current wireless network settings.
1
TKIP is supported for WPA-PSK only.
NOTE
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
b Insert the supplied DVD-ROM into your DVD-ROM drive.
Network name: (SSID)
Communication Mode Authentication method Encryption mode Network key
Infrastructure Open system NONE —
WEP
Shared key WEP
WPA/WPA2-PSK AES
TKIP
1
For example:
Network name: (SSID)
HELLO
Communication Mode Authentication method Encryption mode Network key
Infrastructure WPA2-PSK AES 12345678