User Manual

Scan Using the Control Panel
190
7
Contrast Adjust the setting (from -50 to 50) to get the best image.
The default value of 0 represents an average and is
usually suitable for most images. You can increase or
decrease the contrast level by moving the slider to the
right or left. An increase emphasises dark and light areas
of the image, while a decrease reveals more details in
grey areas. You can also enter a value in the box to set the
Contrast.
NOTE
The Contrast setting is available only when setting
Scan Type to Auto, Grey (Error Diffusion),
True Grey or 24bit Colour.
Yes Yes Yes Yes
Default Restore all settings to their factory default values. Yes Yes Yes Yes
Carrier Sheet
Mode
Scan the following documents using the Carrier Sheet.
For this mode, you can select any setting other than Auto
from the Document Size drop-down list.
 Large-sized Documents (A3, B4 and Ledger)
Fold the document in half and insert it in the Carrier
Sheet for 2-sided (duplex) scanning, then both front
and back pages are combined into a single page.
Select 2in1(A4) for an A3 document, 2in1(B5) for a
B4 document or 2 in 1(Letter) for a Ledger document
from the Document Size drop-down list.
 Important documents (photos, contracts)
 Thin paper (receipts)
 Irregularly-shaped paper (clippings)
NOTE
• Load only one Carrier Sheet at a time.
• Set the document in the centre of the Carrier Sheet and
align the top of the document with the top of the Carrier
Sheet.
Yes Yes Yes Yes
Setting Description Applicable Feature
Image OCR E-mail File