User Manual

Table Of Contents
Appendix
260
B
Service Call Indications B
If an error cannot be cleared by the user, the machine indicates that a service call is needed by lighting up all
the LEDs.
If you see the service call indication shown above, turn the machine off and then on, and then try to scan
again.
If the error is not cleared after turning the machine off and then on, press Stop. The LEDs light up as shown
in the table below to indicate the error type:
Make a note of the error code and report it to your Brother dealer or Brother customer service.
Error Code Network
Device 1
Network
Device 2
Network
Device 3
Scan to
PC
Scan to
USB
Error
Indicator
Power
Indicator
A7: Not a ROM of
matching colour
Parameter to CIS Maker
A9: Detected a special
scanning error