User Manual

Table Of Contents
Appendix
262
B
Image Processing
Auto Deskew On / Off
Remove Background
Colour
Bleed-through / Remove Background Colour
Colour Tone Adjustment
Auto
-
Custom Brightness
Contrast
Shadow
-
Highlight
-
Gamma
-
Greyscale Adjustment Brightness / Contrast
-
Auto Colour Detect Adjust Auto Colour Detect Adjust
-
Skip Blank Page Skip Blank Page
Margin Setting for
Cropping
Top: between -3.0 mm and 3.0 mm
Left: between -3.0 mm and 3.0 mm
Right: between -3.0 mm and 3.0 mm
Bottom: between -3.0 mm and 3.0 mm
-
Punch Hole Removal Paint colour White / Background colour
-
Edge Emphasis On (Low, Middle, High) / Off
-
Boldface Formatting On (Low, Middle, High) / Off
-
Blurred Character
Correction
On / Off
-
B&W Inversion On / Off
-
Noise Reduction On (Low, Middle, High) / Off
-
Remove Ruled Line Vertical / Horizontal / Vertical and Horizontal
-
Edge Fill White / Black
-
Colour Drop Chromatic Colour / Red / Green / Blue / Custom
-
Special Mode
Multifeed Detection On / Off
Layout
None / 2in1: Long Edge / 2in1: Short Edge /
1to2: Long Edge / 1to2: Short Edge
-
Carrier Sheet Mode On / Off
Plastic Card Mode On / Off
Detail Settings
Continuous Scan On / Off
Single Page Scan
On / Off
-
Category Setting Option
Configurable
Settings in
TWAIN
Configurable
Settings in
CC4