User Manual

General Information
40
1
Before you Begin to Use Secure Function Lock 3.0 1
You can configure the Secure Function Lock settings using a web browser. Before you begin, do the following:
1 Start your web browser.
2 In your browser’s address bar, type your machine’s IP address (or your print server name).
For example: http://192.168.1.2/
You can use the machine’s LCD to find its IP address.
NOTE
• You can find the machine’s IP address in the Network Configuration List (see the Network User’s Guide).
• If using a Domain Name System, or have enabled a NetBIOS name, enter another name such as
“SharedScanner” instead of the IP address.
• For example:
http://SharedScanner/
If you have enabled a NetBIOS name, you can also use the node name.
• For example:
http://brwxxxxxxxxxxxx/
You can find the NetBIOS name on the LCD, under Node Name.
3 Type the Administrator password in the Login box. (This is a password to log on to the machine’s web
page.) Click .
NOTE
If using a web browser to configure the machine’s settings for the first time, set a password (see the
Network User’s Guide).