User Manual

Table Of Contents
Scan Preparation
63
3
Plastic Cards 3
1 Adjust the Paper Guides 1 to fit the width of your document.
2 Place your card, face down and top edge first in the ADF between the Guides until you feel it touch the
inside of the machine.
NOTE
You can load up to five plastic cards (total thickness less than 5 mm) at a time.
Certain types of plastic cards may be scratched when scanned.
Rigid cards may not be fed correctly.
If the surface of the card is dirty with grease marks (for example, fingerprints) or similar, wipe the dirt off
before scanning.
Scanning plastic cards can be incorrectly detected as a multifeed.
To scan these documents successfully, disable the multifeed detection function.