User Manual
Table Of Contents
- Product Safety Guide ADS-2400N, ADS-2800W, ADS-3000N, ADS-3600W
- How to use this guide:
- Symbols and conventions used in the documentation
- Compilation and Publication Notice
- Choose a safe location for the unit
- General precautions
- Connecting the unit safely
- Servicing the unit
- Product Warranty & Liability
- Trademarks
- Open Source Licensing Remarks
- Brother customer service
- Unlawful use of scanning equipment
- Notice Regarding the Faithful Reproduction of Scanned Documents
- Important Information for Australia
9
Product Safety Guide
Product Warranty & Liability
Nothing in this guide shall affect any existing product warranty or be construed as granting any
additional product warranty. Failure to follow the safety instructions in this guide may invalidate
your product’s warranty.
WARNING
Use only the AC adapter supplied with this machine.
This product must be installed near an electrical socket that is easily accessible. In
case of an emergency, you must unplug the power cord from the electrical socket to
shut off the power completely.
Wireless LAN (ADS-2800W, ADS-3600W only)
This scanner supports a wireless interface.
LAN connection
NFC (ADS-3600W only)
This scanner supports NFC (Near Field Communication) capabilities.
Radio interference
This product complies with EN55022 (CISPR Publication 22)/Class B. When connecting the
machine to a computer, ensure that you use a USB cable which does not exceed 2 m in length.
WLAN Enable/Disable (ADS-2800W, ADS-3600W only)
1 Press .
2 Press Network.
3 Press WLAN.
4 Press a or b to display WLAN Enable.
5 Press WLAN Enable.
6 Press On (or Off).
IMPORTANT
DO NOT connect this machine to a LAN connection that is subject to over voltages.