User Manual

8
Product Safety Guide
Important Information for Australia
Important safety instructions
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the machine.
4 Unplug this machine from the wall socket before cleaning the outside of the machine. Do not
use liquid or aerosol cleaners. Use a damp cloth for cleaning.
5 Do not use this machine near water.
6 Do not place this machine on an unstable cart, stand, or table. The machine may fall, causing
serious damage to the machine.
7 Slots and openings in the cabinet and the back or bottom are provided for ventilation;
to ensure reliable operation of the machine and to protect it from overheating, these openings
must not be blocked or covered. The openings should never be blocked by placing the
machine on a bed, sofa, rug, or other similar surface. This machine should never be placed
near or over a radiator or heater. This machine should never be placed in a built-in installation
unless adequate ventilation is provided.
8 This machine should be connected to an AC power source within the range indicated on
Specifications in the User’s Guide. Do not connect it to a DC power source. If you are not
sure, contact a qualified electrician.
9 Do not place anything on top of the power cord including this machine. Do not allow the power
cord to be stepped on.
10 Do not place anything in front of the machine that will block scanned documents. Do not place
anything in the path of documents.
11 Do not touch a document during scanning.
12 Never push objects of any kind into this machine through cabinet slots, since they may touch
dangerous voltage points or short out parts resulting in a risk of fire or electric shock. Never
spill liquid of any kind on the machine.
13 Do not attempt to service this machine yourself. Opening or removing covers may expose
you to dangerous voltage points and/or other risks. Refer all servicing to service personnel.
14 Do not try and pick up pages that have not yet finished scanning and exited the machine.
15 Unplug this machine from the electrical socket and refer servicing to Authorized Service
Personnel under the following conditions:
 When the power cord is damaged or frayed.
 If liquid has been spilled into the machine.
 If the machine has been exposed to rain or water.
 If the machine does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the machine to normal operation.
 If the machine has been dropped or the cabinet has been damaged.
 If the machine exhibits a distinct change in performance, indicating a need for service.