Network User's Guide
Table Of Contents
- Network User’s Guide
- Table of Contents
- 1 Introduction
- 2 Changing Your Network Settings
- 3 Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
- Overview
- Confirm Your Network Environment
- Configuration
- Configuration in Ad-hoc Mode
- Configure Your Machine for a Wireless Network Using the Machine’s Control Panel Setup Wizard
- Use Wi-Fi Direct®
- Scan from Your Mobile Device Using Wi-Fi Direct®
- Configure Your Wi-Fi Direct® Network
- Wi-Fi Direct® Network Configuration Overview
- Configure Your Wi-Fi Direct® Network Using the One-Push Method
- Configure Your Wi-Fi Direct® Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Using the PIN Method
- Configure Your Wi-Fi Direct® Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Manually
- 4 Web Based Management
- Overview
- Configure Your Machine Settings
- Set a Login Password
- Use LDAP Authentication
- Restrict Users
- Synchronize with the SNTP Server
- Change the Scan to FTP Configuration
- Change the Scan to SFTP Configuration
- Change the Scan to Network Configuration (Windows®)
- Change the Scan to SharePoint Configuration (Windows®)
- Configure TCP/IP Advanced Settings
- Address Book Import/Export (ADS-2800W / ADS-3600W)
- 5 Scan to E-mail Server (ADS-2800W / ADS-3600W)
- 6 Security Features
- 7 Troubleshooting
- 8 Additional Network Settings (Windows®)
- A Appendix
- B Index
Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
20
3
1 On the machine’s LCD, press .
2 Press Network.
3 Press WLAN.
4 Press a or b to display WPS w/ PIN Code.
Press WPS w/ PIN Code.
5 When Enable WLAN? is displayed, press Yes to accept.
The wireless setup wizard starts.
To cancel, press No.
6 The LCD displays an eight-digit PIN and the machine starts searching for an access point.
7 In your browser’s address bar, type the IP address of your access point (Registrar
1
).
1
The Registrar is normally the WLAN access point/router.
8 Go to the WPS setup page, type the PIN displayed on the LCD in step 6 into the Registrar, and follow
the on-screen instructions.
NOTE
• The setup page is different, depending on the brand of access point/router you are using. See the
instruction manual supplied with your access point/router.
• To use a Windows Vista
®
, Windows
®
7, Windows
®
8, Windows
®
8.1, or Windows
®
10 computer as
a Registrar, you need to register it to your network in advance. See the instruction manual that came with
your WLAN access point/router.
• If you use Windows
®
7, Windows
®
8, Windows
®
8.1, or Windows
®
10 as a Registrar, you can install
the scanner driver after the wireless configuration by following the on-screen instructions. To install the full
driver and software package, follow the steps in the Quick Setup Guide for installation.
Windows Vista
®
/Windows
®
7/Windows
®
8/Windows
®
8.1/Windows
®
10 3
If you are using your computer as a Registrar, follow these steps:
a Windows Vista
®
Click (Start)> Network > Add a wireless device.
Windows
®
7
Click (Start)> Devices and Printers > Add a device.
Windows
®
8 and Windows
®
8.1
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click
Settings > Control Panel > Devices and Printers > Add a device.
Windows
®
10
Click (Start)> Settings > Devices > Connected Devices > Add a device.
b Select the machine and click Next.
c Type the PIN displayed on the LCD in step 6, and then click Next.
d Select the network you want to connect to, and then click Next.
e Click Close.