Network User's Guide

Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
33
3
4 Does your mobile device support the one-push method for Wi-Fi Protected Setup™ (WPS)?
To use the Brother iPrint&Scan functionality in a Wi-Fi Direct
®
network configured by one-push method or by
PIN Method configuration, the device you use to configure Wi-Fi Direct
®
must be running Android™ 4.0 or
greater.
Configure Your Wi-Fi Direct
®
Network Using the One-Push Method 3
If your mobile device supports Wi-Fi Direct
®
, follow these steps to configure a Wi-Fi Direct
®
network.
NOTE
When the machine receives the Wi-Fi Direct
®
request from your mobile device, the message Wi-Fi
Direct connection request received. Press [OK] to connect. appears on the LCD. Press
OK to connect.
1 Press > Network > Wi-Fi Direct > Push Button.
2 Activate Wi-Fi Direct
®
on your mobile device (see your mobile device’s user’s guide for instructions)
when Activate Wi-Fi Direct on other device. Then Press [OK]. appears on the
machine’s LCD. Press OK on your machine to start the Wi-Fi Direct
®
setup. To cancel, press .
3 Do one of the following:
 When your Brother machine is the Group Owner (G/O), connect your mobile device to the machine
directly.
 When your Brother machine is not the G/O, it displays the names of the devices that allow you to
configure a Wi-Fi Direct
®
network. Select the mobile device you want to connect to and press OK.
Search for the available devices again by pressing Rescan.
4 If your mobile device connects successfully, the machine’s LCD displays Connected. You have now
completed the Wi-Fi Direct
®
network setup.
Option Description
Yes See Configure Your Wi-Fi Direct
®
Network Using the One-Push Method of
Wi-Fi Protected Setup™ (WPS) on page 34.
No See Configure Your Wi-Fi Direct
®
Network Using the PIN Method of Wi-Fi
Protected Setup™ (WPS) on page 35.