Network User's Guide

Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
34
3
Configure Your Wi-Fi Direct
®
Network Using the One-Push Method of
Wi-Fi Protected Setup™ (WPS) 3
If your mobile device supports WPS (PBC: Push Button Configuration), follow these steps to configure a Wi-Fi
Direct
®
network.
NOTE
When the machine receives the Wi-Fi Direct
®
request from your mobile device, the message Wi-Fi
Direct connection request received. Press [OK] to connect. appears on the LCD. Press
OK to connect.
1 Press > Network > Wi-Fi Direct > Group Owner.
2 Press On.
3 Swipe up or down or press a or b to select the Push Button option. Press Push Button.
4 When Wi-Fi Direct On? appears, press On to accept. To cancel, press Off.
5 Activate your mobile device’s WPS one-push configuration method (see your mobile device’s user’s
guide for instructions) when Activate Wi-Fi Direct on other device. Then Press [OK].
appears on the machine’s LCD. Press OK on your Brother machine.
This will start the Wi-Fi Direct
®
setup. To cancel, press .
6 If your mobile device connects successfully, the machine’s LCD displays Connected.
You have completed the Wi-Fi Direct
®
network setup.
Configure Your Wi-Fi Direct
®
Network Using the PIN Method 3
If your mobile device supports the PIN Method of Wi-Fi Direct
®
, follow these steps to configure a Wi-Fi
Direct
®
network:
NOTE
When the machine receives the Wi-Fi Direct
®
request from your mobile device, the message Wi-Fi
Direct connection request received. Press [OK] to connect. appears on the LCD. Press
OK to connect.
1 Press > Network > Wi-Fi Direct > PIN Code.
2 When Wi-Fi Direct On? appears, press On to accept. To cancel, press Off.
3 Activate Wi-Fi Direct
®
on your mobile device (see your mobile device’s user’s guide for instructions)
when Activate Wi-Fi Direct on other device. Then Press [OK]. appears on the
machine’s LCD. Press OK on your machine to start the Wi-Fi Direct
®
setup. To cancel, press .