Network User's Guide
Table Of Contents
- Network User’s Guide
- Table of Contents
- 1 Introduction
- 2 Changing Your Network Settings
- 3 Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
- Overview
- Confirm Your Network Environment
- Configuration
- Configuration in Ad-hoc Mode
- Configure Your Machine for a Wireless Network Using the Machine’s Control Panel Setup Wizard
- Use Wi-Fi Direct®
- Scan from Your Mobile Device Using Wi-Fi Direct®
- Configure Your Wi-Fi Direct® Network
- Wi-Fi Direct® Network Configuration Overview
- Configure Your Wi-Fi Direct® Network Using the One-Push Method
- Configure Your Wi-Fi Direct® Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Using the PIN Method
- Configure Your Wi-Fi Direct® Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Manually
- 4 Web Based Management
- Overview
- Configure Your Machine Settings
- Set a Login Password
- Use LDAP Authentication
- Restrict Users
- Synchronize with the SNTP Server
- Change the Scan to FTP Configuration
- Change the Scan to SFTP Configuration
- Change the Scan to Network Configuration (Windows®)
- Change the Scan to SharePoint Configuration (Windows®)
- Configure TCP/IP Advanced Settings
- Address Book Import/Export (ADS-2800W / ADS-3600W)
- 5 Scan to E-mail Server (ADS-2800W / ADS-3600W)
- 6 Security Features
- 7 Troubleshooting
- 8 Additional Network Settings (Windows®)
- A Appendix
- B Index
Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
35
3
4 Do one of the following:
If your Brother machine is the Group Owner (G/O), it waits for a connection request from your mobile
device. When PIN Code appears, enter the PIN displayed on your mobile device in the machine.
Press OK to complete the setup.
If the PIN is displayed on your Brother machine, enter the PIN on your mobile device.
If your Brother machine is not the G/O, it displays the names of the devices that allow you to configure
a Wi-Fi Direct
®
network. Select the mobile device you want to connect to and press OK.
Search for the available devices again by pressing Rescan.
5 Do one of the following:
Press Display
PIN Code to display the PIN on your machine and enter the PIN on your mobile device. Go to the
next step.
Press Input PIN Code to enter a PIN displayed by your mobile device on the machine, and then
press OK. Go to the next step.
If your mobile device does not display a PIN, press on your Brother machine.
Go back to the first step and try again.
6 If your mobile device connects successfully, the machine’s LCD displays Connected.
You have completed the Wi-Fi Direct
®
network setup.
Configure Your Wi-Fi Direct
®
Network Using the PIN Method of Wi-Fi Protected
Setup™ (WPS) 3
If your mobile device supports the PIN Method of Wi-Fi Protected Setup™ (WPS), follow these steps to
configure a Wi-Fi Direct
®
network.
NOTE
When the machine receives the Wi-Fi Direct
®
request from your mobile device, the message Wi-Fi
Direct connection request received. Press [OK] to connect. appears on the LCD. Press
OK to connect.
1 Press > Network > Wi-Fi Direct > Group Owner.
2 Press On.
3 Swipe up or down or press a or b to select the PIN Code option. Press PIN Code.
4 When Wi-Fi Direct On? appears, press On to accept. To cancel, press Off.
5 When Activate Wi-Fi Direct on other device. Then Press [OK]. appears, activate your
mobile device’s WPS PIN configuration method (see your mobile device’s user’s guide for instructions),
and then press OK on your Brother machine.
The Wi-Fi Direct
®
setup starts. To cancel, press .