Network User's Guide

Web Based Management
43
4
Restrict Users 4
Configure Active Directory LDAP Authentication (ADS-2800W / ADS-3600W) 4
Active Directory Authentication restricts the use of your Brother machine. When Active Directory
Authentication is enabled, the machine’s control panel is locked. To use scan functions, enter a user ID,
domain name and password.
NOTE
• Active Directory Authentication supports Kerberos authentication.
• You must configure Simple Network Time Protocol (SNTP) (Network time server) first.
1 Start Web Based Management and access your Brother machine (see step 1 on page 39).
2 Click the Administrator tab.
3 Click the User Restriction Function menu in the left navigation bar.
4 Select Active Directory Authentication.
5 Click Submit.
6 Select Active Directory Authentication in the left navigation bar.
7 Configure the following settings:
 Remember User ID
Select this option to save your user ID.
 Active Directory Server Address
Type the IP address or the server name (for example: “ad.example.com”) of the Active Directory
Server.
 Active Directory Domain Name
Type the Active Directory domain name.
 Protocol & Authentication Method
Select the protocol and authentication method.
 Get Mail Address
Select this option to obtain your machine’s email address from the LDAP server (available only for the
LDAP + kerberos authentication method).
 Get User’s Home Directory
Select this option to obtain your home directory and set it as the Scan to Network destination.
 LDAP Server Port
Type the LDAP server port number (available only for the LDAP + kerberos authentication method).