Network User's Guide

Web Based Management
44
4
 LDAP Search Root
Type the LDAP search root (available only for the LDAP + kerberos authentication method).
 Fetch DNS
Follow the on-screen instructions.
 SNTP
See page 47 for more information about the SNTP protocol.
8 Click Submit.
Unlock the Machine when Active Directory Authentication is Enabled 4
1 On the machine’s LCD, use the Touchscreen to enter your User ID, and Password.
2 Press OK.
3 When your data is authenticated, the control panel unlocks, allowing you to use Scan functions.
NOTE
You cannot change any settings if Active Directory Authentication is enabled.
LDAP Operation (ADS-2800W / ADS-3600W) 4
The LDAP protocol allows you to search for email addresses from your server using the Scan to E-mail server
function.
Changing LDAP Configuration 4
1 Start Web Based Management and access your Brother machine (see step 1 on page 39).
2 Click Network on the machine’s web page.
3 Click Protocol in the left navigation bar.
4 Select the LDAP check box, and then click Submit.
5 Restart your Brother machine to activate the configuration.
6 On your computer, in Web Based Management’s Address Book tab, select LDAP in the left navigation
bar.
7 Configure the following LDAP settings:
 LDAP Server Address
 Port (The default port number is 389.)
 Search Root
 Authentication