Network User's Guide
Table Of Contents
- Network User’s Guide
- Table of Contents
- 1 Introduction
- 2 Changing Your Network Settings
- 3 Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
- Overview
- Confirm Your Network Environment
- Configuration
- Configuration in Ad-hoc Mode
- Configure Your Machine for a Wireless Network Using the Machine’s Control Panel Setup Wizard
- Use Wi-Fi Direct®
- Scan from Your Mobile Device Using Wi-Fi Direct®
- Configure Your Wi-Fi Direct® Network
- Wi-Fi Direct® Network Configuration Overview
- Configure Your Wi-Fi Direct® Network Using the One-Push Method
- Configure Your Wi-Fi Direct® Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Using the PIN Method
- Configure Your Wi-Fi Direct® Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Manually
- 4 Web Based Management
- Overview
- Configure Your Machine Settings
- Set a Login Password
- Use LDAP Authentication
- Restrict Users
- Synchronize with the SNTP Server
- Change the Scan to FTP Configuration
- Change the Scan to SFTP Configuration
- Change the Scan to Network Configuration (Windows®)
- Change the Scan to SharePoint Configuration (Windows®)
- Configure TCP/IP Advanced Settings
- Address Book Import/Export (ADS-2800W / ADS-3600W)
- 5 Scan to E-mail Server (ADS-2800W / ADS-3600W)
- 6 Security Features
- 7 Troubleshooting
- 8 Additional Network Settings (Windows®)
- A Appendix
- B Index
Web Based Management
45
4
Username
The availability of this selection depends on the authentication method used.
Password
The availability of this selection depends on the authentication method used.
Kerberos Server Address
The availability of this selection depends on the authentication method used.
SNTP
Timeout for LDAP
Attribute of Name (Search Key)
Attribute of Email
8 When finished, click Submit. Make sure the Status is OK on the Test Result page.
NOTE
• The LDAP Protocol does not support simplified Chinese, traditional Chinese and Korean.
• If the LDAP server supports Kerberos Authentication, we recommend selecting Kerberos for the
Authentication setting. It provides strong authentication between the LDAP server and your machine.
You must configure the SNTP protocol (network time server), or you must set the date, time and time zone
correctly on your machine’s control panel for Kerberos Authentication. (For information about setting
SNTP, see Synchronize with the SNTP Server on page 47.)
Changing LDAP Configuration Using Your Machine’s Control Panel
(ADS-2800W / ADS-3600W) 4
After you configure LDAP settings, use the LDAP search from your machine to find email addresses.
1 Load the document you want to scan and email into your machine.
2 On the machine’s LCD, press to E-mail Server.
3 Press Address
Book.
4 Press to search.
5 Enter the initial characters for your search using the buttons on the LCD.
NOTE
• You can enter up to 15 characters.
• For more information on how to enter text, see Entering Text (ADS-2800W / ADS-3600W) in the User’s
Guide.