Network User's Guide

Web Based Management
49
4
Change the Scan to FTP Configuration 4
Scan to FTP allows you to scan a document directly to an FTP server on your local network or on the Internet.
For more information about Scan to FTP, see Scan Documents to an FTP Server in the User’s Guide.
1 Start Web Based Management and access your Brother machine (see step 1 on page 39).
2 When the Web Based Management screen appears, click the Scan tab, and then click Scan to
FTP/SFTP/Network/SharePoint in the left navigation bar.
3 Select the FTP checkbox in the profile numbers (from 1 to 25).
4 Click Submit.
5 Click Scan to FTP/SFTP/Network/SharePoint Profile in the left navigation bar.
6 Click the FTP of the Profile No. you selected in step 3
You can configure the following Scan to FTP settings:
 Profile Name (up to 15 characters)
 Host Address
 Username
 Password
 Store Directory
 File Name
 Quality
 Auto Color detect adjust
 File Type
 Password for Secure PDF (ADS-2400N / ADS-3000N)
 Document Size
 Margin Settings
 File Size
 Auto Deskew
 Skip Blank Page
 Skip blank page sensitivity
 2-sided Scan
 Brightness
 Contrast
 Continuous Scan (ADS-2800W / ADS-3600W)
 Passive Mode
 Port Number
Set Passive Mode to Off or On depending on your FTP server and network firewall configuration.
By default, this setting is On. You can also change the port number used to access the FTP server.
The default for this setting is port 21. In most cases, these two settings can remain set as default.
7 Click Submit.