Network User's Guide
Table Of Contents
- Network User’s Guide
- Table of Contents
- 1 Introduction
- 2 Changing Your Network Settings
- 3 Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
- Overview
- Confirm Your Network Environment
- Configuration
- Configuration in Ad-hoc Mode
- Configure Your Machine for a Wireless Network Using the Machine’s Control Panel Setup Wizard
- Use Wi-Fi Direct®
- Scan from Your Mobile Device Using Wi-Fi Direct®
- Configure Your Wi-Fi Direct® Network
- Wi-Fi Direct® Network Configuration Overview
- Configure Your Wi-Fi Direct® Network Using the One-Push Method
- Configure Your Wi-Fi Direct® Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Using the PIN Method
- Configure Your Wi-Fi Direct® Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Manually
- 4 Web Based Management
- Overview
- Configure Your Machine Settings
- Set a Login Password
- Use LDAP Authentication
- Restrict Users
- Synchronize with the SNTP Server
- Change the Scan to FTP Configuration
- Change the Scan to SFTP Configuration
- Change the Scan to Network Configuration (Windows®)
- Change the Scan to SharePoint Configuration (Windows®)
- Configure TCP/IP Advanced Settings
- Address Book Import/Export (ADS-2800W / ADS-3600W)
- 5 Scan to E-mail Server (ADS-2800W / ADS-3600W)
- 6 Security Features
- 7 Troubleshooting
- 8 Additional Network Settings (Windows®)
- A Appendix
- B Index
Web Based Management
56
4
Configure TCP/IP Advanced Settings 4
1 Start Web Based Management and access your Brother machine (see step 1 on page 39).
2 Click the Network tab, and then select your connection type (Wired or Wireless).
3 Select TCP/IP in the left navigation menu.
4 Click Advanced Settings. Configure the following settings: (the example below uses TCP/IP Advanced
Settings (Wired)).
Boot Tries
Type the number of times to attempt start up using the Boot method (between 0 and 32767).
RARP Boot Settings
Select No Subnet Mask or No Gateway.
• No Subnet Mask
Subnet Mask is not changed automatically.
• No Gateway
Gateway Address is not changed automatically.
TCP Timeout
Type the number of minutes before TCP Timeout (between 0 and 32767).
DNS Server Method
Select AUTO or STATIC.