Network User's Guide
Table Of Contents
- Network User’s Guide
- Table of Contents
- 1 Introduction
- 2 Changing Your Network Settings
- 3 Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
- Overview
- Confirm Your Network Environment
- Configuration
- Configuration in Ad-hoc Mode
- Configure Your Machine for a Wireless Network Using the Machine’s Control Panel Setup Wizard
- Use Wi-Fi Direct®
- Scan from Your Mobile Device Using Wi-Fi Direct®
- Configure Your Wi-Fi Direct® Network
- Wi-Fi Direct® Network Configuration Overview
- Configure Your Wi-Fi Direct® Network Using the One-Push Method
- Configure Your Wi-Fi Direct® Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Using the PIN Method
- Configure Your Wi-Fi Direct® Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Manually
- 4 Web Based Management
- Overview
- Configure Your Machine Settings
- Set a Login Password
- Use LDAP Authentication
- Restrict Users
- Synchronize with the SNTP Server
- Change the Scan to FTP Configuration
- Change the Scan to SFTP Configuration
- Change the Scan to Network Configuration (Windows®)
- Change the Scan to SharePoint Configuration (Windows®)
- Configure TCP/IP Advanced Settings
- Address Book Import/Export (ADS-2800W / ADS-3600W)
- 5 Scan to E-mail Server (ADS-2800W / ADS-3600W)
- 6 Security Features
- 7 Troubleshooting
- 8 Additional Network Settings (Windows®)
- A Appendix
- B Index
Scan to E-mail Server (ADS-2800W / ADS-3600W)
60
5
Configure the Scan to E-mail Server Settings 5
Before using the Scan to E-mail Server function, you must configure your Brother machine to communicate
with your network and your email server. You can configure these items using Web Based Management,
Remote Setup, or BRAdmin Professional 3. You must ensure that the following items are configured on your
machine:
IP address (If you are already using your machine on your network, the machine’s IP address has been
configured correctly.)
Email address
SMTP server address/port/Authentication method/Encryption method/Server Certificate Verification
SMTP-AUTH Account Name and password
If you are unsure of any of these items, contact your network administrator.
NOTE
Although you must configure an email address on your machine, the machine does not have an email
receiving function. Therefore, if the recipient replies to an email sent from your machine, the machine
cannot receive it.
Before Scanning to E-mail Server 5
You may have to configure the following items (using Web Based Management or Remote Setup):
Sender Subject
Size Limit
Notification (for more information, see Transmission (TX) Verification Mail on page 62.)