Network User's Guide
Table Of Contents
- Network User’s Guide
- Table of Contents
- 1 Introduction
- 2 Changing Your Network Settings
- 3 Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
- Overview
- Confirm Your Network Environment
- Configuration
- Configuration in Ad-hoc Mode
- Configure Your Machine for a Wireless Network Using the Machine’s Control Panel Setup Wizard
- Use Wi-Fi Direct®
- Scan from Your Mobile Device Using Wi-Fi Direct®
- Configure Your Wi-Fi Direct® Network
- Wi-Fi Direct® Network Configuration Overview
- Configure Your Wi-Fi Direct® Network Using the One-Push Method
- Configure Your Wi-Fi Direct® Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Using the PIN Method
- Configure Your Wi-Fi Direct® Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Manually
- 4 Web Based Management
- Overview
- Configure Your Machine Settings
- Set a Login Password
- Use LDAP Authentication
- Restrict Users
- Synchronize with the SNTP Server
- Change the Scan to FTP Configuration
- Change the Scan to SFTP Configuration
- Change the Scan to Network Configuration (Windows®)
- Change the Scan to SharePoint Configuration (Windows®)
- Configure TCP/IP Advanced Settings
- Address Book Import/Export (ADS-2800W / ADS-3600W)
- 5 Scan to E-mail Server (ADS-2800W / ADS-3600W)
- 6 Security Features
- 7 Troubleshooting
- 8 Additional Network Settings (Windows®)
- A Appendix
- B Index
Scan to E-mail Server (ADS-2800W / ADS-3600W)
62
5
Additional Scan to E-mail Server Features 5
Transmission (TX) Verification Mail 5
Use TX Verification Mail to request notification from the destination computer that your email was received
and processed.
Setup Mail TX 5
Use your machine’s control panel to turn the verification feature on. When Setup Mail TX is On, your email
contains an additional field that is automatically populated with the email’s arrival date and time.
1 On your machine’s LCD, press .
2 Press Network.
3 Press E-mail.
4 Press Setup Mail TX.
5 Press Notification.
6 Press On (or Off).
NOTE
• Message Disposition Notification (MDN)
This field requests the status of the email message after delivery through the Simple Mail Transfer Protocol
(SMTP) transport system. Once the recipient has received the message, this data is used when the
machine or user reads the received email. For example, if the message is opened and read, the receiver
sends back a notification to the original sending machine or user.
The recipient must activate the MDN field to be able to send a notification report; otherwise the request
will be ignored.
• This Brother machine cannot receive email messages. To use the TX Verification feature, you must
redirect the return notification to a different email address. Configure the email address using the
machine’s LCD. Press Network > E-mail > Mail Address, and then enter the email address that you
want to receive the notification.