Network User's Guide
Table Of Contents
- Network User’s Guide
- Table of Contents
- 1 Introduction
- 2 Changing Your Network Settings
- 3 Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
- Overview
- Confirm Your Network Environment
- Configuration
- Configuration in Ad-hoc Mode
- Configure Your Machine for a Wireless Network Using the Machine’s Control Panel Setup Wizard
- Use Wi-Fi Direct®
- Scan from Your Mobile Device Using Wi-Fi Direct®
- Configure Your Wi-Fi Direct® Network
- Wi-Fi Direct® Network Configuration Overview
- Configure Your Wi-Fi Direct® Network Using the One-Push Method
- Configure Your Wi-Fi Direct® Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Using the PIN Method
- Configure Your Wi-Fi Direct® Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Manually
- 4 Web Based Management
- Overview
- Configure Your Machine Settings
- Set a Login Password
- Use LDAP Authentication
- Restrict Users
- Synchronize with the SNTP Server
- Change the Scan to FTP Configuration
- Change the Scan to SFTP Configuration
- Change the Scan to Network Configuration (Windows®)
- Change the Scan to SharePoint Configuration (Windows®)
- Configure TCP/IP Advanced Settings
- Address Book Import/Export (ADS-2800W / ADS-3600W)
- 5 Scan to E-mail Server (ADS-2800W / ADS-3600W)
- 6 Security Features
- 7 Troubleshooting
- 8 Additional Network Settings (Windows®)
- A Appendix
- B Index
Security Features
65
6
Sending an Email Securely Using SSL/TLS 6
This machine supports SSL/TLS to send an email via an email server that requires secure SSL/TLS
communication. To send email via an email server that is using SSL/TLS communication, you must configure
SSL/TLS correctly.
Verifying Server Certificate
If you selected SSL or TLS for SSL/TLS, the Verify Server Certificate check box is automatically selected
to verify the Server Certificate.
• The server certificate is verified during the connection attempt with the server when sending email.
• If you do not need to verify the Server Certificate, clear the Verify Server Certificate check box.
Port Number
If you selected SSL or TLS, the Port value is changed to match the protocol. To change the port number
manually, select SSL/TLS, and then type the port number.
You must configure the SMTP communication method to match the email server. For details about the
email server settings, contact your network administrator or ISP (Internet Service Provider).
In most cases, the secured webmail services require the following settings:
SMTP
Port: 587
Server Authentication Method: SMTP-AUTH
SSL/TLS: TLS