Network User's Guide
Table Of Contents
- Network User’s Guide
- Table of Contents
- 1 Introduction
- 2 Changing Your Network Settings
- 3 Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
- Overview
- Confirm Your Network Environment
- Configuration
- Configuration in Ad-hoc Mode
- Configure Your Machine for a Wireless Network Using the Machine’s Control Panel Setup Wizard
- Use Wi-Fi Direct®
- Scan from Your Mobile Device Using Wi-Fi Direct®
- Configure Your Wi-Fi Direct® Network
- Wi-Fi Direct® Network Configuration Overview
- Configure Your Wi-Fi Direct® Network Using the One-Push Method
- Configure Your Wi-Fi Direct® Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Using the PIN Method
- Configure Your Wi-Fi Direct® Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Manually
- 4 Web Based Management
- Overview
- Configure Your Machine Settings
- Set a Login Password
- Use LDAP Authentication
- Restrict Users
- Synchronize with the SNTP Server
- Change the Scan to FTP Configuration
- Change the Scan to SFTP Configuration
- Change the Scan to Network Configuration (Windows®)
- Change the Scan to SharePoint Configuration (Windows®)
- Configure TCP/IP Advanced Settings
- Address Book Import/Export (ADS-2800W / ADS-3600W)
- 5 Scan to E-mail Server (ADS-2800W / ADS-3600W)
- 6 Security Features
- 7 Troubleshooting
- 8 Additional Network Settings (Windows®)
- A Appendix
- B Index
3
2
2
Change Your Machine’s Network Settings 2
The machine’s network settings can be changed using the control panel, BRAdmin Light, Web Based
Management, or BRAdmin Professional 3.
Using the Machine’s Control Panel (ADS-2800W / ADS-3600W) 2
You can configure your machine for a network using the Network control panel menu.
How to Check the Network Status (ADS-2800W / ADS-3600W) 2
1 On your machine’s LCD, press .
2 Press Network.
3 Press Wired LAN.
4 Press Wired Status.
5 Press Status.
Using BRAdmin Light (Windows
®
) 2
The BRAdmin Light utility is designed for initial setup of Brother network-connected devices. It also can
search for Brother products in a TCP/IP environment, view the status, and configure basic network settings,
such as IP address.
Installing BRAdmin Light 2
1 Make sure your machine is ON.
2 Turn on your computer. Close any open applications.
3 Put the installation DVD-ROM into your DVD-ROM drive.
4 Double click (DVD Drive):\Tools\BRAdminLight\xxx\disk1\setup.exe.
Changing Your Network Settings 2