Network User's Guide
Table Of Contents
- Network User’s Guide
- Table of Contents
- 1 Introduction
- 2 Changing Your Network Settings
- 3 Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
- Overview
- Confirm Your Network Environment
- Configuration
- Configuration in Ad-hoc Mode
- Configure Your Machine for a Wireless Network Using the Machine’s Control Panel Setup Wizard
- Use Wi-Fi Direct®
- Scan from Your Mobile Device Using Wi-Fi Direct®
- Configure Your Wi-Fi Direct® Network
- Wi-Fi Direct® Network Configuration Overview
- Configure Your Wi-Fi Direct® Network Using the One-Push Method
- Configure Your Wi-Fi Direct® Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Using the PIN Method
- Configure Your Wi-Fi Direct® Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct® Network Manually
- 4 Web Based Management
- Overview
- Configure Your Machine Settings
- Set a Login Password
- Use LDAP Authentication
- Restrict Users
- Synchronize with the SNTP Server
- Change the Scan to FTP Configuration
- Change the Scan to SFTP Configuration
- Change the Scan to Network Configuration (Windows®)
- Change the Scan to SharePoint Configuration (Windows®)
- Configure TCP/IP Advanced Settings
- Address Book Import/Export (ADS-2800W / ADS-3600W)
- 5 Scan to E-mail Server (ADS-2800W / ADS-3600W)
- 6 Security Features
- 7 Troubleshooting
- 8 Additional Network Settings (Windows®)
- A Appendix
- B Index
Changing Your Network Settings
4
2
Setting the IP address, Subnet Mask and Gateway Using BRAdmin Light 2
NOTE
• Go to your model’s Downloads page on the Brother Solutions Center at support.brother.com to download
the latest version of Brother’s BRAdmin Light.
• If you require more advanced machine management, use the latest version of BRAdmin Professional 3.
Go to your model’s Downloads page on the Brother Solutions Center at support.brother.com
to download
BRAdmin Professional 3. This utility is available only for Windows
®
users.
• If you are using the firewall function of an anti-spyware or antivirus application, temporarily disable the
application. When you are sure that you can scan, re-enable the application.
• Node name: The Node name appears in the current BRAdmin Light window. The default node name of
the scan server in the machine is “BRWxxxxxxxxxxxx” for a wireless network (where “xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address).
• No password is required by default. Type a password if you have set one and press OK.
1 Start BRAdmin Light.
Windows
®
XP, Windows Vista
®
and Windows
®
7
Click (Start)> All Programs > Brother > BRAdmin Light > BRAdmin Light.
Windows
®
8, Windows
®
8.1, and Windows
®
10
Click (BRAdmin Light) in the task tray.
2 BRAdmin Light automatically searches for new devices.