User Manual

Scan Using the Control Panel
148
7
D In the Margin Settings, enter a value between -3 and 3 to add or remove a specific margin at the edge
of the image.
2-sided Scan Off
Long edge
Short edge
When using 2-sided scanning, select Long edge or Short edge so the
layout of the data file’s pages matches your original.
Brightness -50
-40
-30
-20
-10
0
+10
+20
+30
+40
+50
Adjust the setting (from -50 to 50) to get the best image. The default
value of 0 represents an average and is usually suitable for most images.
If the scanned image is too light, set a lower Brightness level and scan
the document again.
If the image is too dark, set a higher Brightness level and scan the
document again.
Contrast -50
-40
-30
-20
-10
0
+10
+20
+30
+40
+50
Adjust the setting (from -50 to 50) to get the best image. The default
value of 0 represents an average and is usually suitable for most images.
An increase emphasises dark and light areas of the image, while
a decrease reveals more details in grey areas.
Setting Options Description