User Manual
Table Of Contents
- User’s Guide ADS-2400N / ADS-2800W / ADS-3000N / ADS-3600W
- Brother Numbers
- User’s Guides and Where Do I Find Them?
- Getting Started
- You Can Use the Following Features
- Table of Contents
- 1 General Information
- Using the Guide
- About This Machine
- Control Panel Overview (ADS-2400N / ADS-3000N)
- Control Panel Overview (ADS-2800W / ADS-3600W)
- Shortcut Settings (ADS-2800W / ADS-3600W)
- Accessing Brother Utilities (Windows®)
- General Setup (ADS-2400N / ADS-3000N)
- General Setup (ADS-2800W / ADS-3600W)
- Setting Lock (ADS-2800W / ADS-3600W)
- Secure Function Lock 3.0 (ADS-2800W / ADS-3600W)
- Active Directory Authentication (ADS-2800W / ADS-3600W)
- LDAP Authentication (ADS-2800W / ADS-3600W)
- 2 Document Specifications
- 3 Scan Preparation
- 4 Prepare Your Network for Scanning with Your Computer
- 5 Before scanning
- 6 Scan Using Your Computer
- Change the ControlCenter4 User Interface (Windows®)
- Scan Using ControlCenter4 in Home Mode (Windows®)
- Scan Using ControlCenter4 in Advanced Mode (Windows®)
- Create a Custom Tab (ControlCenter4 Advanced Mode) (Windows®)
- Change Scan Settings (ControlCenter4) (Windows®)
- Scan Using Brother iPrint&Scan (Mac)
- Scan Using Nuance™ PaperPort™ 14SE or Other Windows® Applications
- Use ABBYY FineReader
- Scan Using TWAIN Applications (Macintosh)
- Scan Using Apple Image Capture (ICA Driver)
- 7 Scan Using the Control Panel
- Save Scanned Documents on Your Computer in Home Mode
- Save Scanned Documents on Your Computer in Advanced Mode
- Save Scanned Documents on a USB Flash Drive
- Scan Documents to an FTP Server
- Scan Documents to an SFTP Server
- Scan Documents to a Shared Folder / Network Location (Windows®)
- Scan Documents to SharePoint
- Scan Using Web Services (Windows Vista®, Windows® 7, Windows® 8, Windows® 8.1 and Windows® 10)
- Send Scanned Documents Directly to an Email Address (ADS-2800W / ADS-3600W)
- Set Up the Address Book (ADS-2800W / ADS-3600W)
- Upload Scanned Documents to the Web (ADS-2800W / ADS-3600W)
- Change Scan to PC Settings (Windows®)
- Scan Options Using the Touchscreen (ADS-2800W / ADS-3600W)
- 8 Managing the Machine from Your Computer
- 9 Routine Maintenance
- 10 Troubleshooting
- A Specifications
- B Appendix
- C Index
Scan Using the Control Panel
167
7
B Set Auto Deskew
1
to Auto if you want to correct the skew (less than 9 mm from the centre of the
document to the edge) of the scanned data.
C To remove blank pages of the document from the scanned data, set Skip Blank Page
1
to On.
D Select a value between -5 and 5 from the drop-down list to adjust the Skip Blank Page sensitivity.
E Select Number of Documents or Number of Pages in Document Separation settings to split a
scanned file.
F To continue scanning, set Continuous Scan to On.
G To protect the profile, select On from Use PIN for Authentication and enter a 4-digit PIN number in
PIN Code.
H Select the authentication method. You can choose Auto, Kerberos or NTLMv2. If you select Auto, the
authentication method will be detected automatically.
I Enter the Username that has been registered with the CIFS server for the machine (up to 96 characters).
J Enter the Password for access to the CIFS server (up to 32 characters).
K Click Submit.
L Select Date&Time from the General tab.
M Enter the date and time used on the CIFS server.
N Select the time zone from the drop-down list.
O Click Submit.
1
Depending on the condition of the original document, this function may not work correctly.
Scan Using Scan to Network Profiles 7
(ADS-2400N / ADS-3000N)
1 Load your document.
2 Press the , or button to which you have assigned the Network Scan feature.
The machine starts scanning.
(ADS-2800W / ADS-3600W)
1 Load your document.
2 Swipe left or right.
3 Press to Network.