User Manual

General Information
9
1
NOTE
Only one Auto Start Scan profile can be saved at a time.
Settings screen 1
Press (All Settings) to check and access all the machine’s settings.
 General Setup
Press to access the full Settings menu.
 Shortcut Settings
Press to set Shortcuts.
For more information, see Shortcut Settings (ADS-2800W / ADS-3600W) on page 10.
 Network
Press to access Network settings.
 Machine Info.
Press to check the machine’s information.
 Initial Setup
Press to access the Date & Time, Scan offset correction, Reset and Local Language menus.
Basic Operations 1
Press your finger on the Touchscreen to operate it. To display and access all the screen menus or options,
swipe left, right, up, down, or press d c or a b to scroll through them.
IMPORTANT
DO NOT press the Touchscreen with a sharp object, such as a pen or stylus. It may damage the machine.
The following example shows how to change a machine setting. In this example, the Document Size setting
in Scan to USB is changed to Auto.
1 Swipe left or right, or press d or c to display Scan 3.
2 Press to USB.
3 Press Options.
4 Press a or b to display Document Size.
5 Press Document Size.
6 Press a or b to display Auto.
7 Press Auto.
NOTE
Press to go back to the previous screen or menu.