User's Manual

Scan Using the Control Panel
159
7
E Select Color or Black and White/Gray to adjust the detection level.
F In the Margin Settings, enter -3 to 3 to add or remove a specific margin at the edge of the image.
G Set Auto Deskew
1
to Auto to correct the skew (less than 0.36 in. (9 mm) from the center of the
document to the edge) of the scanned data.
H Set Skip Blank Page
1
to On to remove blank pages of the document from the scanned data.
I Select -5 to 5 from the drop-down list to adjust the Skip Blank Page sensitivity.
J In Document Separation settings, select the Number of Documents or the Number of Pages to split
a scanned file.
K Select Continuous Scan to On to continue scanning.
L Change the Port Number setting used to access the SFTP server. The default for this setting is port 21.
In most cases this setting does not need to be changed.
M Click Submit.
1
Depending upon the condition of the original document, this function may not work properly.
NOTE
Using the following characters: ?, /, \, ", :, <, >, | or * may cause a sending error.