User's Manual

Table Of Contents
Appendix
266
B
Service Call Indications B
If there is an error that you cannot clear yourself, the machine will indicate the need for a service call by
lighting up all the LEDs as shown below.
If you see the service call indication shown above, turn the machine off and then on, and then try to scan
again.
If the error is not cleared after turning the machine off and on, press Stop. The LEDs will light up as shown in
the table below to identify the error.
Make a note of the error code and report it to your Brother dealer or Brother customer service (see For
Customer Service on page ii).
Error Code Network
Device 1
Network
Device 2
Network
Device 3
Scan to
PC
Scan to
USB
Error
Indicator
Power
Indicator
A7: Not a ROM of
matching color Parameter
to CIS Maker
A9: Detected a special
scanning error