User's Manual

General Information
42
1
Before You Use Secure Function Lock 3.0 1
You can use a web browser to configure the Secure Function Lock settings. Before configuration, do the
following:
1 Start your web browser.
2 In your browser’s address bar, type your machine’s IP address (or your print server name). For example:
http://192.168.1.2. You can use the machine’s LCD to find its IP address.
NOTE
• Find the machine’s IP address in the Network Configuration List (see the Network User’s Guide).
• If you are using a Domain Name System or enabling a NetBIOS name, you can enter another name such
as “SharedScanner” instead of the IP address.
• For example:
http://SharedScanner/
If you enable a NetBIOS name, you can use the node name.
• For example:
http://brwxxxxxxxxxxxx/
Find the NetBIOS name on the LCD, under Node Name.
3 Type an Administrator password in the Login box. (This is a password to log on to the machine’s web
page.) Click .
NOTE
If you are using a web browser to configure the machine’s settings for the first time, set a password
(see the Network User’s Guide).