User's Manual

Table Of Contents
Scan Preparation
64
3
Plastic Cards 3
1 Adjust the Paper Guides 1 to fit the width of your document.
2 Place your card, face down and top edge first in the ADF between the Guides until you feel it touch the
inside of the machine.
NOTE
You can load up to 5 plastic cards (total thickenss less than 0.2 in. (5.0 mm)) at a time.
Certain types of plastic cards may be scratched when scanned.
Rigid cards may not be fed properly.
If the surface of the card is dirty with grease marks (for example, fingerprints) and such wipe the dirt off
before scanning.
Scanning plastic cards can be falsely detected as a multifeed.
In that case, to scan documents successfully, disable multifeed detection.
1