HTML Version 0 USA ©2012 Brother Industries, Ltd. All rights reserved. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/index.
USER’S GUIDE USER’S GUIDE General Information 1 General Information 2 Before Scanning 3 Scan From Your Computer USER’S GUIDE 4 Scan Using the Scan Key on the Control Panel of the Machine 5 Managing the Machine ADS-2000 from Your Computer 6 Routine Maintenance 7 Troubleshooting A Specifications B Appendix Index Version 0 USA ©2012 Brother Industries, Ltd. All rights reserved. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/index-1.
cover1 USER’S GUIDE ADS-2000 Version 0 USA file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/cover1d.
General Information General Information User's Guides and where to find them? Which manual? What's in it? Where is it? Product Safety Guide Read this Guide first. Please read the Safety Printed / In the box Instructions before you set up your machine. See this Guide for trademarks and legal limitations. Quick Setup Guide Follow the instructions for setting up your machine Printed / In the box and installing the drivers and software for the operating system and connection type you are using.
General Information 1 General Information Using the Documentation Thank you for buying a Brother machine! Reading the documentation will help you make the most of your machine. Symbols and Conventions Used in the Documentation The following symbols and conventions are used throughout the documentation. CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries.
Before Scanning 2 Before Scanning Before Scanning Before using the Scan to PC key, the Scan to USB key or attempting any other scanning operation, confirm the following: • Make sure you have installed the Brother software (MFL-Pro Suite) by following the steps in the Quick Setup Guide. • Make sure that the interface cable is physically secure. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter2.
Scan From Your Computer 3 Scan From Your Computer Change the User Interface of ControlCenter4 (Windows®) ControlCenter4 has two operation modes: Home Mode and Advanced Mode. You can change the mode at any time. • Home Mode Lets you access your machine's main functions easily. You can intuitively use the functions without any settings. 1. Document Type option Lets you select a document type. 2. Custom Settings button Lets you configure scan settings. 3. Scan Size drop-down list Lets you select a scan size.
Scan From Your Computer Gives you more control over the details of your machine's functions. You can also customize one-button scan actions as you like. 1. Image button Lets you scan a document directly into any graphic viewer/editor application. 2. OCR button Lets you scan a document and convert it to text. 3. E-mail button Lets you scan a document to your default E-mail application. 4.
Scan From Your Computer • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 3 Click Configuration and then select Mode Select. Select Home Mode or Advanced Mode in the mode dialog box. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3.
Scan Using the Scan Key on the Control Panel of the Machine 4 Scan Using the Scan Key on the Control Panel of the Machine Scan Using the Scan Key on the Control Panel of the Machine (Windows®) • Scan to PDF • Scan Photos and Graphics • Scan to E-mail attachment • Scan to an Editable Text File (OCR) • Change the Feature Assigned to the Scan to PC Key to set the Default Scan-to Action • Save Scanned Documents to a USB Flash Memory Drive • Save Scanned Documents on Mobile Devices Scan to PDF You can scan and
Scan Using the Scan Key on the Control Panel of the Machine 3 4 Click the Scan to PC Settings button. The Remote Setup window will appear. 5 6 Click the OK button to close the Remote Setup window. 7 Click the Image tab. Select Image from the drop-down list. Click the Device Scan Settings button on the Device Settings tab. The Device Scan Settings dialog box will appear. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4.
Scan Using the Scan Key on the Control Panel of the Machine 8 Select PDF from the File Type drop-down list. Note • To save the document as a password-protected PDF, select Secure PDF (*.pdf) from the File Type drop(Set PDF Password) button, and enter the password. down list, click the • Searchable PDF is a file format that includes the text data layer over a scanned image. This layer allows you to search the text on the image data.
Scan Using the Scan Key on the Control Panel of the Machine file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4.
Managing the Machine from Your Computer 5 Managing the Machine from Your Computer Monitor the Status of the Machine from Your Computer (Windows®) The Status Monitor utility is a configurable software tool for monitoring the status of one or more devices, allowing you to get immediate notification of error messages such as document jam.
Managing the Machine from Your Computer select Help. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter5.
Routine Maintenance 6 Routine Maintenance Clean the Outside of the Machine 1 Wipe the outside of the machine with a dry, soft, and lint-free cloth to remove dust. 2 Open the Top Cover. Wipe the Control Panel with a dry, soft, and lint-free cloth to remove dust. 3 4 Close the Top Cover. 5 Wipe the inside of the Output Tray with a dry, soft, and lint-free cloth to remove dust. Pull the Output Tray (1) out and unfold the Document Stopper (2). file:///C|/Documents%20and%20Settings/mcampbell.
Routine Maintenance 6 Fold the Document Stopper and firmly insert the Output Tray into the machine. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter6.
Troubleshooting 7 Troubleshooting Identifying Your Problem First, check the following: • The AC power cord is connected properly and the machine is turned on. • All of the protective parts have been removed. • The Front Cover, Separation Pad Cover and Pick-up Roller Cover are completely closed. • The interface cable is securely connected to the machine and the computer. • The correct driver for the machine has been installed. • The computer is connected to the correct port on the machine.
Specifications A Specifications General Note This chapter provides a summary of the machine’s specifications. For additional specifications, visit http://www.brother.com/ for details. Memory Capacity Standard 256 MB Power Source USA 100 - 120 V AC 50/60 Hz Latin American Countries 220 - 240 V AC 50/60 Hz Scanning 2 Approx. 18 W Ready Approx. 7 W Sleep Approx. 1.5 W Power Down Approx. 0.25 W Scanning 2 Approx. 18 W Ready Approx. 7 W Sleep Approx. 1.5 W Power Down Approx. 0.
Specifications Weights Approx. 7.3 lb (3.3 kg) Temperature Operating 41 to 95 °F (5 to 35 °C) Humidity Operating 20 to 80 % Up to 50 pages (Paper: 20 lb (80 g/m 2) Letter or A4 size, or less than 0.2 in. (5 mm)) ADF (automatic document feeder) Document Size Multiple Paper Single Paper Width 2.0 in. to 8.5 in. (51 mm to 215.9 mm) Length 2.76 in. to 11.7 in. (70 mm to 297 mm) Width 2.0 in. to 8.5 in. (51 mm to 215.9 mm) Length 2.76 in. to 34.0 in.
Specifications Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/appendix11.
Appendix B Appendix Brother Numbers Important For technical help, you must call the country where you bought the machine. Calls must be made from within that country. • Register Your Product • FAQs (frequently asked questions) • For Customer Service Register Your Product By registering your product with Brother International Corporation, you will be recorded as the original owner of the product.
index Index B Brother Brother numbers Brother Numbers Customer Service For Customer Service FAQs (frequently asked questions) FAQs (frequently asked questions) product support For Customer Service Solutions Center FAQs (frequently asked questions) C ControlCenter2 Macintosh Scan Using ControlCenter2 (Macintosh) Scan Using the Scan Key on the Control Panel of the Machine (Macintosh) Change Scan to PC Key Settings (Macintosh) Change Scan to USB Key Settings (Windows ® and Macintosh) Monitor the St
index ICA Scan Using Apple Image Capture (ICA Driver - Mac OS X 10.6.x, 10.7.
index Panel of the Machine (Macintosh) Change Scan to PC Key Settings (Macintosh) USB Save Scanned Documents to a USB Flash Memory Drive Save Scanned Documents on Mobile Devices Save Scanned Documents to a USB Flash Memory Drive Save Scanned Documents on Mobile Devices Change Scan to USB Key Settings (Windows ® and Macintosh) Windows® Nuance™ PaperPort™12SE Scan Using Nuance™ PaperPort™12SE TWAIN Compliant Scan Using Nuance™ PaperPort™12SE or Other Windows® Applications WIA Compliant Scan Using Nuan
About This Machine About This Machine 1. Top Cover The machine is turned on by opening the Top Cover. 2. Document Guides 3. Front Cover 4. Output Tray 5. Document Stopper 6. USB Direct Interface 7. Cover Release Lever 8. AC Power Connector 9. USB Connector 10. Kensington Security Slot Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_2.
Loading Receipts and Other Thin Documents Loading Receipts and Other Thin Documents Make sure documents with ink or correction fluid are completely dry. 1 Open the Top Cover (1). 2 Insert the document into the Carrier Sheet. Note Set the document in the center of the Carrier Sheet and align the top of the document with the top of the Carrier Sheet. 3 Adjust the Document Guides (1) to fit the width of the Carrier Sheet.
Loading Receipts and Other Thin Documents machine. 5 Pull the Output Tray out of the machine and then unfold the Document Stopper. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_5_7.
Scanning Methods Scanning Methods There are two ways to scan using your Brother machine. • Scan to PC • Scan to USB Scan to PC The Scan to PC feature lets you scan your document and save the scanned image into your computer. Before using the Scan to PC feature, you must install MFL-Pro Suite from the supplied DVD-ROM and the machine must be connected to the computer.
Scan to USB Scan to USB The Scan to USB feature lets you scan your document and save the scanned image into a USB device. You can start scanning using the Scan to USB feature by pressing the Scan to USB key. Before scanning, you can configure the settings from your computer. To configure the settings, you must install MFL-Pro Suite from the supplied DVD-ROM and the machine must be connected to the computer.
Scan Using ControlCenter4 Home Mode (Windows®) Scan Using ControlCenter4 Home Mode (Windows®) Brother provides a software interface for your machine called ControlCenter. You can use this software to quickly scan photos and save them as JPEGs or PDFs, as well as other file formats. You can also scan single-sided and two-sided documents and save them as PDFs or use OCR (Optical Character Recognition) to convert them to editable text.
Scan Using ControlCenter4 Home Mode (Windows®) Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 3 Select the Scan tab. 4 Do one of the following: • Select Photo, Text and Graph, or Monochrome Text in the Document Type option for the type of original you want to scan.
Scan Using ControlCenter4 Home Mode (Windows®) 8 9 Crop the scanned image if needed (see Crop Scanned Image). Do one of the following: • Click the (Save) button to save the scanned data. See Save Scanned Documents. • Click the (Open with an Application) button to open the scanned data in another application. See Scan to an Application. • Click the (Send E-mail) button to attach the scanned data to an E-mail. See Send E-mail.
Scan Using ControlCenter4 Home Mode (Windows®) Auto Automatically selects suitable colors for your document. Brightness Adjust the setting (-50 to 50) to get the best image. The default value of 0 represents an average and is usually suitable for most images. You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image. You can also enter a value in the box to set the level.
Scan Using ControlCenter4 Home Mode (Windows®) • Set the document in the center of the Carrier Sheet and align the top of the document with the top of the Carrier Sheet.
Scan Using ControlCenter4 Home Mode (Windows®) this function detects a multifeed, confirm that the data scanned before the multifeed has been saved, and then start scanning again at the next page or the beginning of the document. Display Scanning Results 4 5 Shows the numbers of total pages saved and blank pages skipped on your computer screen. Click the OK button to close the Advanced Settings dialog box. Click the OK button to close the Custom Scan Settings dialog box.
Scan Using ControlCenter4 Home Mode (Windows®) Image Editing Toolbar 1. Restart Cancels all the edits applied to the selected image. The edited image returns to its original state. 2. Fit to Window Displays the scanned image so that the entire image fits in the window. 3. Zoom In Zooms in on the scanned image. 4. Zoom Out Zooms out of the scanned image. 5. Crop Lets you crop the image. Click the (Crop) button, then change the frame to the area you want to keep after cropping.
Scan Using ControlCenter4 Home Mode (Windows®) 2. Zooms in on the image. 3. Zooms out of the image. 4. Rotates the image counter-clockwise by 90 degrees. 5. Rotates the image clockwise by 90 degrees. 6. Drag the frame to adjust the area to be cropped. 3 Click the OK button. The edited image is displayed in the image viewer. Page Top Save Scanned Documents The (Save) button lets you save a scanned image to a folder on your hard disk in one of the file types shown in the file attachment list.
Scan Using ControlCenter4 Home Mode (Windows®) scanned document to. 5 Click the OK button. The scanned document is saved in the destination folder. Page Top Open with an Application The (Open with an Application) button lets you scan an image directly into your graphics application for image editing. 1 Click the 2 Select the application from the drop-down list and click the OK button. The image will be opened in the application you have chosen. (Open with an Application) button.
Scan Using Captiva QuickScan Pro™ or ISIS™ Applications (Windows®) Scan Using Captiva QuickScan Pro™ or ISIS™ Applications (Windows®) You can use the free trial version of Captiva QuickScan Pro™ or other applications, which support ISIS™ specifications, for scanning. Before scanning using the ISIS™ applications, you must install the ISIS™ scanner driver. Note To install the ISIS™ scanner driver, internet access is required.
Scan Photos and Graphics Scan Photos and Graphics To scan photos or graphics, you should select the Scan to Image feature. Your document will be scanned and sent directly to your computer. The ControlCenter4 software will launch the default graphics application on the designated computer. 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear.
Scan Photos and Graphics 5 6 Click the OK button to close the Remote Setup window. 7 Click the Image tab. 8 Change other settings if needed (see Change Scan to PC Settings). Click the Device Scan Settings button on the Device Settings tab. The Device Scan Settings dialog box will appear. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_1_2.
Scan Photos and Graphics 9 10 Load your document. Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_1_2.
Scan to E-mail attachment Scan to E-mail attachment You can scan a document and add it as an attachment to a message in your default E-mail application. 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan to E-mail attachment 5 6 Click the OK button to close the Remote Setup window. 7 Click the E-mail tab. 8 Change other settings if needed (see Change Scan to PC Settings). Click the Device Scan Settings button on the Device Settings tab. The Device Scan Settings dialog box will appear. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_1_3.
Scan to E-mail attachment 9 10 Load your document. Press Scan to PC. The machine starts scanning the document, creates a file attachment, and launches your Email application displaying the new message waiting to be addressed. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_1_3.
Scan to an Editable Text File (OCR) Scan to an Editable Text File (OCR) Your machine can convert characters in a scanned document to text data by using optical character recognition (OCR) technology. This text can be edited using your favorite word processing software. Note Nuance™ PaperPort™12SE must be installed on your PC. 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear.
Scan to an Editable Text File (OCR) 5 6 Click the OK button to close the Remote Setup window. 7 Click the OCR tab. 8 Change other settings if needed (see Change Scan to PC Settings). Click the Device Scan Settings button on the Device Settings tab. The Device Scan Settings dialog box will appear. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_1_4.
Scan to an Editable Text File (OCR) 9 10 Load your document. Press Scan to PC. The machine scans the document, converts it into editable text, then sends it to your default word processing application. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_1_4.
Change the Feature Assigned to the Scan to PC Key to set the Default Scan-to Action Change the Feature Assigned to the Scan to PC Key to set the Default Scan-to Action 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Change the Feature Assigned to the Scan to PC Key to set the Default Scan-to Action 5 Click the OK button. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_1_5.
Save Scanned Documents to a USB Flash Memory Drive Save Scanned Documents to a USB Flash Memory Drive 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Save Scanned Documents to a USB Flash Memory Drive 5 6 7 8 Change other settings if needed (see Change Scan Settings). Insert a USB flash memory drive into your machine. Load your document. Press Scan to USB on the control panel. The machine starts scanning. Important DO NOT remove the USB flash memory drive while the Scan to USB key is blinking to avoid damaging the drive or the data stored on it. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_1_6.
Save Scanned Documents on Mobile Devices Save Scanned Documents on Mobile Devices The machine can save the scanned data on a mobile device. Note • This feature can be used with mobile devices that use the USB mass storage standard. • The machine does not support charging any USB devices. • Brother Image Viewer for Android™, which is available for download from the Android™ Market, enables users to view or edit the scanned data. For details, download the Brother Image Viewer for Android™.
Change Scan to PC Settings Change Scan to PC Settings 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Change Scan to PC Settings 4 5 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). Change the settings. The following settings can be changed. Setting File Type Description Select the file type you want to use for the scanned data. Applicable Feature Image OCR E-mail File Yes Yes Yes Yes Note • To save the document as a password-protected PDF, select Secure PDF (*.
Change Scan to PC Settings Nuance™ PaperPort™12SE must be installed on your computer. • Several file types such as TIFF, TIFF Multi-Page, PDF, Secure PDF and JPEG support file size compression. Select Uncompressed or Compressed to adjust the file size for TIFF or TIFF Multi-Page. For PDF, Secure PDF and JPEG, use the slider to adjust the file size (not available for Scan to OCR). Target Application Select the destination application from the drop-down list.
Change Scan to PC Settings 24bit Color Uses up to 16.8 million colors to scan the image. Although using 24bit Color creates an image with the most accurate color reproduction, it requires the most memory and has the longest transfer time. Auto Uses suitable colors for your document automatically. Document Size Document size is set to Auto by default. You can scan Yes documents of any size without making any adjustments to Document Size.
Change Scan to PC Settings setting Scan Type to Auto, Gray (Error Diffusion), True Gray or 24bit Color. Duplex(twoIf you check this box, the machine scans both sides of sided) Scanning the document. When using the automatic 2-sided (duplex) scan feature, you must select Long-edge binding or Short-edge binding depending on the layout of your original to make sure that the data file created appears correctly in the scanned document.
Change Scan to PC Settings Note • If you want to scan a plastic card with different settings, set Plastic Card Mode off, Resolution to 600 dpi, and Multifeed Detection to Off. • Load only one plastic card at a time. 6 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 7 Change the settings. The following settings can be changed. Setting Applicable Feature Image OCR E-mail File Corrects the skew (within 5 degrees) of the scanned data.
Change Scan to PC Settings 9 Click the OK button to close the Device Scan Settings dialog box. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_2_19.
Change Scan Settings Change Scan Settings 1 Start the ControlCenter application. • Windows® (1) Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by double-clicking the (2) (ControlCenter4) icon in the task tray. Click the Device Settings tab (the example below uses Home Mode). • Macintosh (1) Click the (ControlCenter2) icon in the menu bar and then select Open.
Change Scan Settings 2 Click the Remote Setup button. The Remote Setup window will appear. Note You can also start Remote Setup by following the instructions below: • Windows® Click Start, All Programs, Brother, ADS-XXXX, and Remote Setup. • Macintosh Double-click the RemoteSetup icon located in Macintosh HD/Applications/Brother. 3 Select Scan to USB in the folder tree. • Windows® • Macintosh file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_5_8.
Change Scan Settings 4 Change the settings. The following settings can be changed. Setting Description Scan Type Lets you select from a range of scan color depth. • B&W Use for text or line art images. • Gray Use for photographic images or graphics. • Color Uses up to 16.8 million colors to scan the image. Although using 24bit Color creates an image with the most accurate color reproduction, it requires the most memory and has the longest transfer time.
Change Scan Settings To save the document as a password-protected PDF, select Secure PDF from the File Type(Gray) drop-down list, and then enter the password (the default value is “0000”) in the Password for Secure PDF field. File Type(Color) Lets you select a file type for scanning in color. Select a file type you want to use for the scanned data.
Change Scan Settings entered, the file name will be the date and a sequential number. 5 File Size(Gray) Lets you select a file size for scanning in gray. Select a file size you want to use for the scanned data. File Size(Color) Lets you select a file size for scanning in color. Select a file size you want to use for the scanned data. Password for Secure PDF Enter a 4-digit PIN number. Click the OK button. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Turn Off the Status Monitor Turn Off the Status Monitor 1 Right-click the Brother Status Monitor icon and then click Load Status Monitor on Startup to clear the check mark. 2 Right-click again then click Exit. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter5_1_2.
What are the Status Monitor Indicators? What are the Status Monitor Indicators? Once you start up your computer, the Brother Status Monitor icon appears on the tasktray. A green icon indicates the normal stand-by condition. A yellow icon indicates a warning. A red icon indicates an error has occurred. A gray icon indicates the offline condition. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter5_1_3.
Change the Language on Remote Setup Change the Language on Remote Setup 1 Start the ControlCenter application. • Windows® (1) Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by double-clicking the (2) (ControlCenter4) icon in the task tray. Click the Device Settings tab (the example below uses Home Mode).
Change the Language on Remote Setup 2 Click the Remote Setup button. The Remote Setup window will appear. Note You can also start Remote Setup by following the instructions below: • Windows® Click Start, All Programs, Brother, ADS-XXXX, and Remote Setup. • Macintosh Double-click the RemoteSetup icon located in Macintosh HD/Applications/Brother. 3 Select Language in the folder tree. • Windows® • Macintosh file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter5_3_3.
Change the Language on Remote Setup 4 5 Select a language from the Language on Remote Setup drop-down list. Click the OK button. Note After you change the language in the Remote Setup window, restart Remote Setup to see the change. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter5_3_3.
Clean the Scanner Clean the Scanner A spot of dirt or correction fluid on the glass strip may cause poor-quality scans. Clean the inside of the scanner if a vertical line appears in the scanned data or if areas are missing in the scanned data. 1 2 Unplug the machine from the AC power outlet. 3 In the document feeder unit, clean the glass strips (1) (2) with a lint-free cloth moistened with a non-flammable glass cleaner.
Clean the Scanner 5 Press and hold the green buttons (1) of the Separation Pad and then pull the Separation Pad (2) upward. CAUTION DO NOT touch the metal part of the Separation Pad Cover. Doing this may cause injury to you and serious damage to the machine. 6 7 8 Clean the Separation Pad with a lint-free cloth moistened with a nonflammable glass cleaner. Attach the Separation Pad in the Separation Pad Cover. Close the Separation Pad Cover until it clicks.
Clean the Scanner 9 Hold both sides of the Pick-up Roller Cover (1) and then pull the cover down. 10 Slide the Pick-up Roller (1) to the right edge. 11 The holder of the Pick-up Roller has a narrow opening that is designed to avoid dropping the roller, and the shape of the shaft of the Pick-up Roller matches the opening. Turn the Pick-up Roller around until the shape of the shaft matches the opening of the holder. 12 Pinch and pull the Pick-up Roller out of the machine.
Clean the Scanner 15 Slide the Pick-up Roller (1) to the left edge while turning the Pick-up Roller. 16 17 Close the Pick-up Roller Cover. Close the Front Cover and the Top Cover. CAUTION DO NOT touch the metal part of the Separation Pad Cover. Doing this may cause injury to you and serious damage to the machine. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter6_2.
Clean the Scanner Note In addition to cleaning the glass strips with a non-flammable glass cleaner, run your fingertip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, scan a document after each cleaning attempt. When there is a spot of dirt or correction fluid on the glass strip the scanned sample shows a vertical line.
Packing and Shipping the Machine Packing and Shipping the Machine When you transport the machine, use the packing materials that came with your machine. If you do not pack the machine properly, any damage that may occur in transit may not be covered by your warranty. The machine should be adequately insured with the carrier. 1 Close the Panel Cover gently. 2 Push the Output Tray firmly back into the machine. 3 Wrap the machine in the bag it originally came in.
Packing and Shipping the Machine Note If you are returning your machine to Brother as part of the Exchange Service, pack only the machine. Keep all separate parts (power cord, carrier sheet and USB cable) and printed materials to use with your “Exchange” machine. 5 Close the carton and tape it shut. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter6_4.
Error Messages in the Status Monitor Error Messages in the Status Monitor The Status Monitor will report problems with the machine. Take the proper action by referring to the following table. If you want to turn the status monitor on, see Monitor the Status of the Machine from Your Computer (Windows ®) or Monitor the Status of the Machine from Your Computer (Macintosh). Error message Cause Action Ready — Sleep The machine is idle and the amount of time specified by the Sleep Time setting has elapsed.
Error Messages in the Status Monitor again. Document Jam • The Document Guides are not set to the correct document size. • The settings are not suitable for your document. • Paper dust has accumulated on the surface of the Pick-up Roller or Separation Pad. Clear the document jam (see Document Jam) and then do the following: • Adjust the Document Guides to fit the width of the document.
Control Panel Overview Control Panel Overview 1. Error Indicator (with LED) The Error Indicator indicates that the machine is in one of the following states: Document Jam / Front Cover is Open / Unusable Device / Unsupported Device / Multifeed Detection etc. 2. Power Indicator (with LED) It will blink depending on the status of the machine. 3. Stop key Job Cancel / Wake-up / Error Recovery / Disconnect Remote Setup 4. Scan to PC key (with LED) Scan to PC / Wake-up etc. 5.
Control Panel Overview The machine is ready to scan. Ready (PC connected) The machine is connected to your computer and ready to scan. Ready (USB connected) The USB device is connected to the machine and ready to scan. Ready (PC and USB connected) The machine is connected to your computer and a USB device and is ready to scan. Sleep The machine is in Sleep mode (Power Save mode). The machine acts as though it is turned off. Do one of the following to wake up the machine: • Press any key.
Control Panel Overview Scanning to PC Scan to your computer is in process. Note The Scan to USB key lights up when the USB flash memory drive is connected to the machine. Scanning to USB Scan to your USB device is in process. Note The Scan to PC key lights up when your computer is connected to the machine. Ejecting Paper The machine is ejecting paper. If there is no document loaded in the ADF or the paper ejection was temporarily stopped, press the Stop key to finish ejecting the paper.
Control Panel Overview Replace Separation Pad Replace the Separation Pad with a new one. See Replace the Separation Pad. Replace Pick-up Roller Replace the Pick-up Roller with a new one. See Replace the Pick-up Roller. Replace Separation Pad and Pick-up Roller Replace the Separation Pad and the Pick-up Roller with new ones. See Replace the Separation Pad and Replace the Pick-up Roller. Front Cover is Open Close the Front Cover of the machine.
Control Panel Overview • See Custom Scan Settings to scan using ControlCenter4 Home Mode (Windows ®) and follow the steps. • See Change Scan Settings to scan using ControlCenter4 Advanced Mode (Windows ®) and follow the steps. • See Change Scan Settings to scan using ControlCenter2 (Macintosh) and follow the steps. • See Change Scan to PC Settings to scan using the Scan to PC key (Windows ®) and follow the steps. • See Change Scan Settings to scan using the Scan to PC key (Macintosh) and follow the steps.
Control Panel Overview steps. • See Change Scan to PC Settings to scan using the Scan to PC key (Windows ®) and follow the steps. • See Change Scan Settings to scan using the Scan to PC key (Macintosh) and follow the steps. Confirm that the data scanned before the multifeed occurred has been saved, and start scanning again from the next page or from the beginning.
Control Panel Overview USB flash memory drive, press any key and then do one of the following: • Turn off the USB flash memory drive's write-protection and then try again. • Use a USB flash memory drive that has write-protection turned off. Too Many Files Your machine cannot save to a USB flash memory drive if it contains too many files.
Control Panel Overview See Change Scan to PC Settings to scan using the Scan to PC key (Windows ) and follow the steps. • See Change Scan Settings to scan using the Scan to PC key (Macintosh) and follow the steps. Machine Error Make a note of the LED indication and report the indication to your dealer or to Brother Customer Service. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_3.
Scanning Difficulties Scanning Difficulties Difficulty Cause Suggestions TWAIN or WIA errors appear when starting to scan. (Windows ®) TWAIN or WIA driver has not been chosen as the primary source in your scanning application. Make sure the Brother TWAIN or WIA driver is chosen as the primary source in your scanning application. For example, in Nuance™ PaperPort™12SE, click Scan Settings and then Select to select the Brother TWAIN/WIA driver. TWAIN or ICA errors appear when starting to scan.
Scanning Difficulties document. • The Auto Deskew feature was set to On when the document was scanned. • The settings are not suitable for your document. For example, a Letter-size document was fed when Legal was selected as document size. • The card was loaded horizontally. and you are scanning a document that contains multiple page sizes, insert narrow pages straight and as close to the center of the machine as possible. If the document does not stay straight while feeding, use Continuous Scanning.
Scanning Difficulties • See Change Scan to PC Settings to scan using the Scan to PC key (Windows ®) and follow the steps. • See Change Scan Settings to scan using the Scan to PC key (Macintosh) and follow the steps. • See Change Scan Settings to scan using the Scan to USB key and follow the steps. The scan speed is too The resolution is not suitable for your slow. document.
Scanning Difficulties • The document is sticky or has a sticky note on it, which caused an overlap. The document is jammed. • Paper dust has accumulated on the surface of the Pick-up Roller or Separation Pad. • There are foreign objects in the document feeder. • Your document is not acceptable for the machine. The scan quality is poor. • Paper dust has accumulated on the surface of the Pick-up Roller or Separation Pad. • Paper dust has accumulated on the surface of the glass strips inside the machine.
Scanning Difficulties Bleed through is seen in the scan data. The settings are not appropriate for the Check the Bleed Through Prevention/Base Color type of document being scanned. Removal check box. Colors in the scanned data are dark. The settings are not appropriate for the Do one of the following: type of document being scanned. • Check the Bleed Through Prevention/Base Color Removal check box and then scan from your computer. • Change Brightness higher and then scan from your computer.
Software Difficulties Software Difficulties Difficulty Suggestions Cannot install software. (Windows ® users only) Run the Repair MFL-Pro Suite program on the DVD-ROM. This program will repair and reinstall the software. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter7_6.
Other Difficulties Other Difficulties Difficulty Cause Suggestions The machine is not turned on. The machine was plugged in within 60 seconds after pulling out the plug. Turn off the machine, wait 60 seconds, and then turn on the scanner. Cannot start Remote Setup. • The machine is turned off. • Turn on the machine and then try again. • The machine is not connected to your computer. • Connect the machine to your computer and then try again. • The machine is in Auto PowerDown mode.
Check the ROM Version Check the ROM Version 1 Start the ControlCenter application. • Windows® (1) Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by double-clicking the (2) (ControlCenter4) icon in the task tray. Click the Device Settings tab (the example below uses Home Mode). • Macintosh (1) Click the (ControlCenter2) icon in the menu bar and then select Open.
Check the ROM Version 2 Click the Remote Setup button. The Remote Setup window will appear. Note You can also start Remote Setup by following the instructions below: • Windows® Click Start, All Programs, Brother, ADS-XXXX, and Remote Setup. • Macintosh Double-click the RemoteSetup icon located in Macintosh HD/Applications/Brother. 3 Select Machine Info. in the folder tree. The window will display the Main Controller Main ROM Version.
Check the ROM Version Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter7_8_2.
Scanner Scanner Color/Black Yes/Yes Windows ® Windows® XP1/Windows Vista ®/Windows® 7 Macintosh Mac OS X 10.5.8, 10.6.x, 10.7.x 2 WIA Compliant Windows ® Windows® XP1/Windows Vista ®/Windows® 7 ICA Compliant Macintosh Mac OS X 10.6.x, 10.7.
Computer Requirements Computer Requirements SUPPORTED OPERATING SYSTEMS AND SOFTWARE FUNCTIONS Computer Platform & Operating System Version Supported PC PC Software Interface Functions Windows® Windows® XP Scanning Operating Home (SP2 System or greater) 2 USB Processor Minimum Speed Intel ® Minimum Recommended RAM RAM 128 MB 256 MB Hard Disk Space to install For For Drivers Applications 150 MB 1.5 GB 1 GB 500 MB 1.5 GB 1 GB (32 bit) 2 GB (64 bit) 650 MB 1.
FAQs (frequently asked questions) FAQs (frequently asked questions) The Brother Solutions Center is our one-stop resource for all your Brother machine needs. You can download the latest software documents and utilities, read FAQs and troubleshooting tips, and learn how to get the most from your Brother product. http://solutions.brother.com/ Note • You can check here for Brother driver updates. • To keep your machine performance up to date, check here for the latest firmware upgrade.
For Customer Service For Customer Service In USA: 1-877-BROTHER (1-877-276-8437) 1-901-379-1215 (fax) For the location of a Brother authorized service center, call 1-877-BROTHER (1-877-276-8437). In Canada: 1-877-BROTHER (514) 685-4898 (fax) For the location of a Brother authorized service center, call 1-877-BROTHER.
Scan Using ControlCenter2 (Macintosh) Scan Using ControlCenter2 (Macintosh) • Scan Documents and Photos • Scan to PDF • Scan to an Application • Scan to E-mail Attachment • Scan to an Editable Text File (OCR) • Save Scanned Documents to a Folder • Scan Color and Black-and-White Pages at the Same Time • Scan Pages of Different Sizes at the Same Time • Scan Business Cards • Scan Two Pages and Combine Them on One Page (2 in 1) • Scan Documents Wider than Letter • Scan Documents Longer than Letter • Scan Docum
Scan Using ControlCenter2 (Macintosh) Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. 3 While holding down the Control key click the Image button in the SCAN tab to change scan settings, such as file format, resolution, color or Scan-to application if needed (see Change Scan Settings). 4 Click the Image button in the SCAN tab.
Scan Using the Scan Key on the Control Panel of the Machine (Macintosh) Scan Using the Scan Key on the Control Panel of the Machine (Macintosh) • Scan to PDF • Scan Photos and Graphics • Scan to E-mail attachment • Scan to an Editable Text File (OCR) • Change the Feature Assigned to the Scan to PC Key to set the Default Scan-to Action • Save Scanned Documents to a USB Flash Memory Drive • Save Scanned Documents on Mobile Devices Scan to PDF You can scan and save documents as PDF files using the Scan to Im
Scan Using the Scan Key on the Control Panel of the Machine (Macintosh) 4 5 6 Select Image from the drop-down list. 7 8 While holding down the Control key click the Image button. The Scan To Image dialog box will appear. Click the OK button to close the Remote Setup window. Click the SCAN tab on the ControlCenter2 window. Click the Device Button tab. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_3.
Scan Using the Scan Key on the Control Panel of the Machine (Macintosh) 9 Select PDF from the File Type drop-down list. Note • To save the document as a password-protected PDF, select Secure PDF (*.pdf) from the File Type dropdown list and then enter the password in the Set PDF Password dialog box. • Searchable PDF is a file format that includes the text data layer over a scanned image. This layer allows you to search the text on the image data.
Scan Using the Scan Key on the Control Panel of the Machine (Macintosh) • Several file types such as TIFF, TIFF Multi-Page, PDF, Secure PDF and JPEG support file size compression. Select Uncompressed or Compressed to adjust the file size for TIFF or TIFF Multi-Page. For PDF, Secure PDF and JPEG, use the slider to adjust the file size. 10 11 12 Change other settings if needed (see Change Scan Settings). Load your document. Press Scan to PC. The machine starts scanning.
Change Scan to PC Key Settings (Macintosh) Change Scan to PC Key Settings (Macintosh) • Scan Color and Black-and-White Pages at the Same Time • Scan Pages of Different Sizes at the Same Time • Scan Business Cards • Scan Two Pages and Combine Them on One Page (2 in 1) • Scan Documents Wider than Letter • Scan Documents Longer than Letter • Scan Both Sides of a Page Automatically • Scan Specific/irregular-sized Documents Using the Carrier Sheet • Scan Plastic Cards • Correct Page Skew • Delete Blank Pages •
Change Scan to PC Key Settings (Macintosh) The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. 2 While holding down the Control key click a button for the Scan-to action you want to change (Image, OCR, Email, or File). The Scan-to action setting dialog box will appear (the example below uses Image). 3 Click the Device Button tab. 4 5 6 7 Select Auto from the Scan Type drop-down list.
Change Scan to USB Key Settings (Windows®and Macintosh) Change Scan to USB Key Settings (Windows® and Macintosh) • Scan Color and Black-and-White Pages at the Same Time • Scan Pages of Different Sizes at the Same Time • Scan Business Cards • Scan Both Sides of a Page Automatically • Correct Skewed Documents • Delete Blank Pages • Detect Overlapping (Multifeed) Pages • Change Scan Settings Scan Color and Black-and-White Pages at the Same Time 1 Start the ControlCenter application.
Change Scan to USB Key Settings (Windows®and Macintosh) Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. (2) 2 Click the DEVICE SETTINGS tab. Click the Remote Setup button. The Remote Setup window will appear.
Change Scan to USB Key Settings (Windows®and Macintosh) • Macintosh 4 5 6 7 Select Auto from the Scan Type drop-down list. Change other settings if needed (see Change Scan Settings). Load your document. Press Scan to USB on the control panel. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_5.
Change Scan to USB Key Settings (Windows®and Macintosh) file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_5.
Monitor the Status of the Machine from Your Computer (Macintosh) Monitor the Status of the Machine from Your Computer (Macintosh) The Status Monitor utility is a configurable software tool for monitoring the status of a device, allowing you to get immediate notification of error messages such as document jam. The Status Monitor starts from the ControlCenter2.
Monitor the Status of the Machine from Your Computer (Macintosh) • Troubleshooting Lets you access the troubleshooting web site by clicking the Troubleshooting button. • Visit the Genuine Supplies website Lets you access the Brother genuine supplies web site by clicking the Visit the Genuine Supplies website button. • Pick-up Roller Count Displays the Pick-up Roller replacement cycle. • Separation Pad Count Displays the Separation Pad replacement cycle.
Scan Using ControlCenter4 Advanced Mode (Windows®) Scan Using ControlCenter4 Advanced Mode (Windows®) Brother provides a software interface for your machine called ControlCenter. You can use this software to quickly scan photos and save them as JPEGs or PDFs, as well as other file formats. You can also scan single sided and two-sided documents and save them as PDFs or use OCR (Optical Character Recognition) to convert them to editable text.
Scan Using ControlCenter4 Advanced Mode (Windows®) 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 3 Select the Scan tab.
Change Scan to PC Key Settings (Windows®) Change Scan to PC Key Settings (Windows®) • Scan Color and Black-and-White Pages at the Same Time • Scan Pages of Different Sizes at the Same Time • Scan Business Cards • Scan Two Pages and Combine Them on One Page (2 in 1) • Scan Documents Wider than Letter • Scan Documents Longer than Letter • Scan Both Sides of a Page Automatically • Scan Specific/irregular-sized Documents Using the Carrier Sheet • Scan Plastic Cards • Correct Page Skew • Delete Blank Pages • Ch
Change Scan to PC Key Settings (Windows®) 3 Click the Device Scan Settings button. The Device Scan Settings dialog box will appear. 4 5 6 7 8 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). Select Auto from the Scan Type drop-down list. Change other settings if needed (see Change Scan to PC Settings). Load your document. Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Change Scan to PC Key Settings (Windows®) file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_2.
Scan Using Apple Image Capture(ICA Driver - Mac OS X 10.6.x, 10.7.x) Scan Using Apple Image Capture (ICA Driver - Mac OS X 10.6.x, 10.7.x) You can scan a document using the ICA driver. If you installed MFL-Pro Suite from the installer DVD-ROM, the ICA driver has been already installed on your computer. If you don’t see your machine in the Print & Fax or Print & Scan list, you can add your machine by clicking the + button (see Select your machine from Print & Fax or Print & Scan).
Scan Using Apple Image Capture(ICA Driver - Mac OS X 10.6.x, 10.7.x) 3 4 5 6 Load your document. Select a size of your document for Scan Size. Select the destination folder or destination application for Scan To. Click the Scan button. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_11.
Scan Using Presto! PageManager or TWAIN Applications (Macintosh) Scan Using Presto! PageManager or TWAIN Applications (Macintosh) You can use the NewSoft Presto! PageManager application for scanning. The instructions for scanning in these steps are for Presto! PageManager. For other applications which support TWAIN specifications, these steps will be similar.
Scan Using Nuance™ PaperPort™12SE or Other Windows®Applications Scan Using Nuance™ PaperPort™12SE or Other Windows ® Applications • Scan Using Nuance™ PaperPort™12SE • Scan Using Windows® Photo Gallery or Windows® Fax and Scan Scan Using Nuance™ PaperPort™12SE You can use the Nuance™ PaperPort™12SE application, which is included in the Brother MFL-Pro software suite, for scanning. The instructions for scanning in these steps are for Nuance™ PaperPort™12SE.
Scan Using Nuance™ PaperPort™12SE or Other Windows®Applications 4 5 Click the Select button. 6 7 Check the Display scanner dialog box check box in the Scan or Get Photo panel. 8 Adjust the settings in the Scanner Setup dialog box if needed (Resolution, Scan Type, Brightness, and Contrast). • TWAIN Driver Settings From the Available Scanners list, select TWAIN: TW-Brother ADS-XXXX (where ADS-XXXX is the model name of your machine).
Scan Using Nuance™ PaperPort™12SE or Other Windows®Applications 9 From the Document Size drop-down list, select your document size. Note After you select a document size, you can adjust the scanning area further by clicking the left mouse button and dragging it. This is required when cropping an image for scanning. 10 Click the Start button. The machine starts scanning. TWAIN Driver Settings 1. Scan (Image Type) You can select Photo, Web or Text for the type of document you want to scan.
Scan Using Nuance™ PaperPort™12SE or Other Windows®Applications 300 x 300 dpi Yes Yes Yes 400 x 400 dpi Yes Yes Yes 600 x 600 dpi Yes Yes Yes 1200 x 1200 dpi Yes No Yes 3. Scan Type Select one of the following type: • Black & White Use for text or line art images. • Gray (Error Diffusion) Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray images without using true gray dots. Black dots are put in a specific pattern to give a gray appearance.
Scan Using Nuance™ PaperPort™12SE or Other Windows®Applications from the Document Size drop down list. If you select Custom, the Custom Document Size dialog box appears in which you can specify the document size. 8. Duplex(two-sided) Scanning Select Long-edge binding or Short-edge binding depending on the layout of your original to make sure that the data file created appears correctly in the scanned document.
Scan Using Nuance™ PaperPort™12SE or Other Windows®Applications If you want to change some advanced settings, click Adjust the quality of the scanned picture. • Resolution You can select a scanning resolution from the Resolution text box. Higher resolutions take more memory and transfer time, but produce a finer scanned image. • Brightness Adjust the setting (-50 to 50) to get the best image. The default value of 0 represents an average and is usually suitable for most images.
Set Up the Brother Machine from Your Computer Set Up the Brother Machine from Your Computer The Remote Setup application lets you configure many machine settings from your computer. When you start the Remote Setup application, the settings on your Brother machine will be downloaded automatically to your computer and displayed on the screen. If you change the settings, you can upload them directly to the machine.
Set Up the Brother Machine from Your Computer • Macintosh (1) Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. (2) 2 Click the DEVICE SETTINGS tab. Click the Remote Setup button. The Remote Setup window will appear.
Set Up the Brother Machine from Your Computer 3 Select a menu in the folder tree and then configure the settings as needed (the example below uses General Setup). • Windows® • Macintosh • OK Lets you start uploading data to the machine and exit the Remote Setup application. If an error message is displayed, enter the correct data again and then click OK. • Cancel Lets you exit the Remote Setup application without uploading data to the machine. file:///C|/Documents%20and%20Settings/mcampbell.
Set Up the Brother Machine from Your Computer • Apply Lets you upload data to the machine without exiting the Remote Setup application. The Remote Setup synchronizes the date and time of the machine with the connected computer during startup. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter5_3.
Replace the Separation Pad Replace the Separation Pad Your machine is equipped with a scan counter. The counter automatically counts how many times the machine has scanned. When the machine scans 50,000 times, the machine will display a message on the Status Monitor to remind you to replace the Separation Pad. 1 Open the Top Cover (1) and the Front Cover (2). 2 Press and hold the buttons (1) on the inside of the Front Cover and then pull the Separation Pad Cover (2) down.
Replace the Separation Pad 3 Press and hold the green buttons (1) of the Separation Pad and then pull the Separation Pad (2) upward. 4 Attach a new Separation Pad into the Separation Pad Cover. 5 6 7 Close the Separation Pad Cover until it clicks. Close the Front Cover and the Top Cover. Reset the counter (see Reset the Usage Counters).
Replace the Separation Pad Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter6_3_4.
Replace the Pick-up Roller Replace the Pick-up Roller Your machine is equipped with a scan counter. The counter automatically counts how many times the machine has scanned. When the machine scans 50,000 times, the machine will display a message on the Status Monitor to remind you to replace the Pick-up Roller. 1 Open the Top Cover (1) and the Front Cover (2). 2 Hold the both sides of the Pick-up Roller Cover (1) and then pull the cover down. 3 Slide the Pick-up Roller (1) all the way to the right.
Replace the Pick-up Roller 5 Pinch and pull the Pick-up Roller out of the machine. 6 Place a new Pick-up Roller into the machine. Note Identify the left and right sides of the Pick-up Roller before attaching it. 7 Slide the Pick-up Roller (1) to the left edge while turning the Pick-up Roller. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter6_3_5.
Replace the Pick-up Roller 8 9 10 Close the Pick-up Roller Cover. Close the Front Cover and the Top Cover. Reset the counter (see Reset the Usage Counters). Note Confirm the following items: • The value of Pick-up Roller Count is 0 (see Check Consumable Replacement Cycle (Windows ®) or Check Consumable Replacement Cycle (Macintosh)). • The error message on the Status Monitor has been cleared.
Save Scanned Documents to a USB Flash Memory Drive Save Scanned Documents to a USB Flash Memory Drive 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. 2 Click the DEVICE SETTINGS tab. 3 4 Click the Remote Setup button.
Save Scanned Documents to a USB Flash Memory Drive 6 7 8 Insert a USB flash memory drive into your machine. Load your document. Press Scan to USB on the control panel. The machine starts scanning. Important DO NOT remove the USB flash memory drive while the Scan to USB key is blinking to avoid damaging the drive or the data stored on it. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_3_6.
Save Scanned Documents on Mobile Devices Save Scanned Documents on Mobile Devices The machine can save the scanned data on a mobile device. Note • This feature can be used with mobile devices that use the USB mass storage standard. • The machine does not support charging any USB devices. • Brother Image Viewer for Android™, which is available for download from the Android™ Market, enables users to view or edit the scanned data. For details, download the Brother Image Viewer for Android™.
Loading Clippings, Photos, and Other Important Documents Loading Clippings, Photos, and Other Important Documents Make sure documents with ink or correction fluid are completely dry. 1 Open the Top Cover (1). 2 Insert the document into the Carrier Sheet. Note Set the document in the center of the Carrier Sheet and align the top of the document with the top of the Carrier Sheet. 3 Adjust the Document Guides (1) to fit the width of the Carrier Sheet.
Loading Clippings, Photos, and Other Important Documents machine. 5 Pull the Output Tray out of the machine and then unfold the Document Stopper. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_5_6.
Scan Documents (Scan to PDF) Scan Documents (Scan to PDF) 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 3 Select the Scan tab.
Scan Documents (Scan to PDF) The machine starts scanning, and then the Scanning Completed dialog box will appear and display the number of scanned pages. The scanned image appears in the image viewer. Note If the Scanning Completed dialog box does not appear and you want to display the number of scanned pages, check the Display Scanning Results check box. 7 8 Click the left or right arrow buttons to preview each scanned document. Click the (Save) button. The Save dialog box will appear.
Scan Documents (Scan to PDF) file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_2_2.
Scan Documents (Other File Types) Scan Documents (Other File Types) 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 3 Select the Scan tab.
Scan Documents (Other File Types) The machine starts scanning, and then the Scanning Completed dialog box will appear and display the number of scanned pages. The scanned image appears in the image viewer. Note If the Scanning Completed dialog box does not appear and you want to display the number of scanned pages, check the Display Scanning Results check box. 7 8 Click the left or right arrow buttons to preview each scanned document. Click the (Save) button. The Save dialog box will appear.
Scan Color and Black-and-White Pages at the Same Time Scan Color and Black-and-White Pages at the Same Time 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Color and Black-and-White Pages at the Same Time 5 6 7 8 Select Auto from the Scan Type drop-down list. Click the OK button. Change the scan size if needed (see Change the Scan Size). Click the (Scan) button. The machine starts scanning, and then the Scanning Completed dialog box will appear and display the number of scanned pages. The scanned image appears in the image viewer.
Scan Pages of Different Sizes at the Same Time Scan Pages of Different Sizes at the Same Time 1 Load your document. Note Narrow documents should be inserted straight and as close to the center of the machine as possible. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear.
Scan Pages of Different Sizes at the Same Time 5 6 Select Auto from the Scan Size drop-down list. Click the (Scan) button. The machine starts scanning, and then the Scanning Completed dialog box will appear and display the number of scanned pages. The scanned image appears in the image viewer. Note If the Scanning Completed dialog box does not appear and you want to display the number of scanned pages, check the Display Scanning Results check box.
Scan Business Cards Scan Business Cards 1 2 Load your document (see Loading Business Cards and Plastic Cards). Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Scan Business Cards appear and display the number of scanned pages. The scanned image appears in the image viewer. Note If the Scanning Completed dialog box does not appear and you want to display the number of scanned pages, check the Display Scanning Results check box. 7 8 Click the left or right arrow buttons to preview each scanned document. Do one of the following: • Click the (Save) button to save the scanned data. See Save Scanned Documents.
Scan Two Pages and Combine Them on One Page (2 in 1) Scan Two Pages and Combine Them on One Page (2 in 1) 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Two Pages and Combine Them on One Page (2 in 1) 5 6 Select 2 in 1 from the Scan Size drop-down list. Click the (Scan) button. The machine starts scanning, and then the Scanning Completed dialog box will appear and display the number of scanned pages. The scanned image appears in the image viewer. Note If the Scanning Completed dialog box does not appear and you want to display the number of scanned pages, check the Display Scanning Results check box.
Scan Documents Wider than Letter Size Scan Documents Wider than Letter Size 1 Load the Carrier Sheet (see Loading Documents Wider than Letter Size). Note Load only one Carrier Sheet at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Documents Wider than Letter Size 5 6 Check the Carrier Sheet Mode check box. Check the Duplex(two-sided) Scanning check box and then select the Long-edge binding option. Note If you cannot check the Duplex(two-sided) Scanning check box, select a document size other than Long Paper from the Scan Size drop-down list. 7 8 9 Configure other settings if needed (see Custom Scan Settings). Select a 2 in 1 scan size from the Scan Size drop-down list. Click the (Scan) button.
Scan Documents Longer than Letter Size Scan Documents Longer than Letter Size 1 Load your document. Note Load only one document at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Documents Longer than Letter Size 5 Select Long Paper (Normal Width) or Long Paper (Narrow Width) from the Scan Size drop-down list. Note • Each Long Paper option can scan a large document up to the following size: Long Paper (Normal Width): 8 1/2 × 34.0 in. (215.9 × 863.0 mm) Long Paper (Narrow Width): 4 1/4 × 34.0 in. (107.9 × 863.0 mm) • If you cannot select Long Paper, uncheck the Duplex(two-sided) Scanning and Auto Deskew check box. 6 Click the (Scan) button.
Scan Documents with More than 50 Pages Scan Documents with More than 50 Pages 1 Load your document. Note Load no more than 50 pages at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Documents with More than 50 Pages 5 6 7 8 Check the Continuous Scanning check box. 9 When the machine has finished scanning, a dialog asks you if you want to continue scanning. Do one of the following: • If you are finished scanning, click Finish. Configure other settings if needed (see Custom Scan Settings). Change the scan size if needed (see Change the Scan Size). Click the (Scan) button. The machine starts scanning.
Scan Both Sides of a Page Automatically Scan Both Sides of a Page Automatically 1 2 Load your documents. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Scan Both Sides of a Page Automatically 5 Check the Duplex(two-sided) Scanning check box. Note If you cannot check the Duplex(two-sided) Scanning check box, select a document size other than Long Paper from the Scan Size drop-down list. 6 Select Long-edge binding or Short-edge binding depending for the document layout as shown in the following table.
Scan Both Sides of a Page Automatically of scanned pages. The scanned image appears in the image viewer. Note If the Scanning Completed dialog box does not appear and you want to display the number of scanned pages, check the Display Scanning Results check box. 9 10 Click the left or right arrow buttons to preview each scanned document. Do one of the following: • Click the (Save) button to save the scanned data. See Save Scanned Documents.
Scan Specific/irregular-sized Documents Using the Carrier Sheet Scan Specific/irregular-sized Documents Using the Carrier Sheet 1 Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear.
Scan Specific/irregular-sized Documents Using the Carrier Sheet 5 6 7 8 Check the Carrier Sheet Mode check box. Configure other settings if needed (see Custom Scan Settings). Select a scan size other than Auto from the Scan Size drop-down list. Click the (Scan) button. The machine starts scanning, and then the Scanning Completed dialog box will appear and display the number of scanned pages. The scanned image appears in the image viewer.
Scan Plastic Cards Scan Plastic Cards 1 Load a plastic card (see Loading Business Cards and Plastic Cards). Note Load only one plastic card at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Plastic Cards 5 6 7 Check the Plastic Card Mode check box. Configure other settings if needed (see Custom Scan Settings). Click the (Scan) button. The machine starts scanning, and then the Scanning Completed dialog box will appear and display the number of scanned pages. The scanned image appears in the image viewer. Note If the Scanning Completed dialog box does not appear and you want to display the number of scanned pages, check the Display Scanning Results check box.
Scan Plastic Cards Automatic Image Rotation: Off Original Layout Scan Result Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_2_13.
Correct Page Skew Correct Page Skew 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Select the Scan tab.
Correct Page Skew 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Auto Deskew check box and then click the OK button. Click the OK button. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_2_14.
Delete Blank Pages Delete Blank Pages 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Select the Scan tab.
Delete Blank Pages 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Blank Page Skip check box and then click the OK button. Click the OK button. Note The Blank Page Skip feature may not remove blank pages depending on the document. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_2_15.
Change Document Orientation to Match the Text Change Document Orientation to Match the Text 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Select the Scan tab.
Change Document Orientation to Match the Text 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Automatic Image Rotation check box and then click the OK button. Click the OK button. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_2_16.
Detect Overlapping (Multifeed) Pages Detect Overlapping (Multifeed) Pages 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Select the Scan tab.
Detect Overlapping (Multifeed) Pages 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Multifeed Detection check box and then click the OK button. Click the OK button. Note The Multifeed Detection feature does not support documents narrower than 2 3/4 in. (70 mm) wide. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_2_17.
Scan Pages Laid on Top of Each Other Scan Pages Laid on Top of Each Other 1 Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Pages Laid on Top of Each Other 5 6 7 8 Check the Carrier Sheet Mode check box. Configure other settings if needed (see Custom Scan Settings). Select a scan size other than Auto from the Scan Size drop-down list. Click the (Scan) button. The machine starts scanning, and then the Scanning Completed dialog box will appear and display the number of scanned pages. The scanned image appears in the image viewer.
Scan Envelopes Scan Envelopes 1 Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Envelopes 5 6 7 8 Check the Carrier Sheet Mode check box. Configure other settings if needed (see Custom Scan Settings). Select a scan size other than Auto from the Scan Size drop-down list. Click the (Scan) button. The machine starts scanning, and then the Scanning Completed dialog box will appear and display the number of scanned pages. The scanned image appears in the image viewer.
Prevent Bleed Through Prevent Bleed Through 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Select the Scan tab.
Prevent Bleed Through 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Bleed Through Prevention/Base Color Removal check box and then click the OK button. Click the OK button. Note When you scan newspapers or magazines with the Bleed Through Prevention/Base Color Removal feature, the scanned data can be faded. To avoid faded scanned data, select a higher resolution. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Remove the Background Color (Base Color Removal) and Make Documents Easier to Read Remove the Background Color (Base Color Removal) and Make Documents Easier to Read 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Remove the Background Color (Base Color Removal) and Make Documents Easier to Read 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Bleed Through Prevention/Base Color Removal check box and then click the OK button. Click the OK button. Note When you scan newspapers or magazines with the Bleed Through Prevention/Base Color Removal feature, the scanned data can be faded. To avoid faded scanned data, select a higher resolution.
View the Number of Scanned Pages View the Number of Scanned Pages 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Select the Scan tab.
View the Number of Scanned Pages 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Display Scanning Results check box and then click the OK button. Click the OK button. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_2_22.
Scan to an Application Scan to an Application The (Open with an Application) button lets you scan an image directly into your graphics application for image editing. 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan to an Application 5 6 Click the (Scan) button. The machine starts scanning, and then the Scanning Completed dialog box will appear and display the number of scanned pages. The scanned image appears in the image viewer. Note If the Scanning Completed dialog box does not appear and you want to display the number of scanned pages, check the Display Scanning Results check box. 7 8 9 Click the left or right arrow buttons to preview each scanned document.
Scan to E-mail Attachment Scan to E-mail Attachment You can scan a document to your default E-mail application, so you can send the scanned document as an attachment. 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan to E-mail Attachment 6 Click the (Scan) button. The machine starts scanning, and then the Scanning Completed dialog box will appear and display the number of scanned pages. The scanned image appears in the image viewer. Note If the Scanning Completed dialog box does not appear and you want to display the number of scanned pages, check the Display Scanning Results check box. 7 8 9 10 Click the left or right arrow buttons to preview each scanned document.
Scan to Editable Text File (OCR) Scan to Editable Text File (OCR) The (OCR) button lets you scan a document and convert it to text. This text can be edited using your favorite word processing software. Note Nuance™ PaperPort™12SE must be installed on your computer. 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear.
Scan to Editable Text File (OCR) Note If the Scanning Completed dialog box does not appear and you want to display the number of scanned pages, check the Display Scanning Results check box. 7 8 Click the left or right arrow buttons to preview each scanned document. 9 Configure the OCR settings and click the OK button. The machine converts the scanned image into editable text, then sends it to your default word processing application. Click the (OCR) button.
Use NewSoft Presto! BizCard 5 (Macintosh) Use NewSoft Presto! BizCard 5 (Macintosh) Presto! BizCard lets you manage the information from scanned business cards, such as names, companies, mailing addresses, phone/fax numbers and e-mail addresses, on your computer. Simply scan, or import your business cards and Presto! BizCard automatically saves the data and image for each card. Different viewing modes are available for easy searching, editing, creating, and sorting.
View Scanned Documents on Your Computer Screen View Scanned Documents on Your Computer Screen 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
View Scanned Documents on Your Computer Screen 4 5 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). 6 7 Check the Display Scanning Results check box and then click the OK button. Click the Advanced Settings button. The Advanced Settings dialog box will appear. Change other settings if needed (see Change Scan to PC Settings). Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_2_18.
Detect Overlapping (Multifeed) Pages Detect Overlapping (Multifeed) Pages 1 Start the ControlCenter application. • Windows® (1) Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by double-clicking the (2) (ControlCenter4) icon in the task tray. Click the Device Settings tab (the example below uses Home Mode).
Detect Overlapping (Multifeed) Pages 2 Click the Remote Setup button. The Remote Setup window will appear. Note You can also start Remote Setup by following the instructions below: • Windows® Click Start, All Programs, Brother, ADS-XXXX, and Remote Setup. • Macintosh Double-click the RemoteSetup icon located in Macintosh HD/Applications/Brother. 3 Select Scan to USB in the folder tree. • Windows® • Macintosh file:///C|/Documents%20and%20Settings/mcampbell.
Detect Overlapping (Multifeed) Pages 4 5 Select On from the Multifeed Detection drop-down list. Change other settings if needed (see Change Scan Settings). Note The Multifeed Detection feature does not support documents narrower than 2 3/4 in. (70 mm) wide. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_5_7.
Set Sleep Mode and Auto Powerdown Set Sleep Mode 1 Start the ControlCenter application. • Windows® (1) Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by double-clicking the (2) (ControlCenter4) icon in the task tray. Click the Device Settings tab (the example below uses Home Mode). • Macintosh (1) Click the (ControlCenter2) icon in the menu bar and then select Open.
Set Sleep Mode and Auto Powerdown 2 Click the Remote Setup button. The Remote Setup window will appear. Note You can also start Remote Setup by following the instructions below: • Windows® Click Start, All Programs, Brother, ADS-XXXX, and Remote Setup. • Macintosh Double-click the RemoteSetup icon located in Macintosh HD/Applications/Brother. 3 Select General Setup in the folder tree. • Windows® • Macintosh file:///C|/Documents%20and%20Settings/mcampbell.
Set Sleep Mode and Auto Powerdown 4 Configure the settings as needed. • Sleep Time You can select how long the machine must be idle before it goes into Sleep mode. To enter Ready mode, do one of the following: • Press any key. • Open the Top Cover. • Load your document. 5 Click the OK button. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter5_3_2.
Replace Consumables Replace Consumables The Status Monitor will tell you when the machine detects that consumables are near the end of their life. • Order Consumables • Check Consumable Replacement Cycle (Windows ®) • Check Consumable Replacement Cycle (Macintosh) • Replace the Separation Pad • Replace the Pick-up Roller • Reset the Usage Counters Order Consumables The following table lists the part numbers of consumables and rough guidelines for replacing these parts. No. Part Name Part No.
Replace Consumables Note The usage may vary depending on the usage environment, type of documents, and how often documents are scanned. These parts are available at most Brother retailers. If you cannot find the part you need and you have a Visa, MasterCard, Discover, or American Express credit card, you can order parts directly from Brother. (You can visit us online for a complete selection of the Brother parts and supplies that are available for purchase.
Reset the Usage Counters Reset the Usage Counters 1 Start the ControlCenter application. • Windows® (1) Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by double-clicking the (2) (ControlCenter4) icon in the task tray. Click the Device Settings tab (the example below uses Home Mode). • Macintosh (1) Click the (ControlCenter2) icon in the menu bar and then select Open.
Reset the Usage Counters 2 3 Click the Remote Setup button. The Remote Setup window will appear. Select Machine Info. in the folder tree. • Windows® • Macintosh file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter6_3_6.
Reset the Usage Counters 4 Do one of the following: • To reset the counter for the Separation Pad, check the Separation Pad check box for Reset Counter for Consumables. • To reset the counter for the Pick-up Roller, check the Pick-up Roller check box for Reset Counter for Consumables. 5 Click the OK button. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter6_3_6.
Document Jam Document Jam Documents can jam in the document feeder unit if they are not inserted or fed properly, or if they are too long. Follow the steps below to clear a document jam. 1 2 Take out any paper from the ADF that is not jammed. 3 Pull the jammed document out of the machine. Open the Front Cover by pinching the Cover Release Lever (1). Note Check for ripped paper inside the machine. Remove any ripped paper you find inside the machine. 4 5 Close the Front Cover. Press any key.
Document Jam Important • To avoid damage to the jammed document, DO NOT pull the document out before opening the Front Cover. • Take out any paper from the ADF before closing the Front Cover. • To avoid future document jams, do the following: • Close the Front Cover properly by pushing it gently in the middle. • Configure the settings for your document properly. • Clean the Separation Pad and Pick-up Roller. See Clean the Scanner. • Stagger the pages and then load your document.
Service Call Indications Service Call Indications If there is an error that cannot be cleared by the user, the machine will indicate that a service call is needed by lighting up all the LEDs as shown below. If you see the service call indication shown above, turn the machine off and then on, and then try to scan again. If the error is not cleared after turning the machine off and then on, press Scan to PC and then Scan to USB. The LEDs will light up as shown in the table below to identify the error.
Service Call Indications Service. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_3_2.
Multifeed Multifeed Multiple pages were fed at the same time. Follow the steps below to clear the multifeed. 1 2 Remove any paper from the document feeder. 3 Pull the document out of the machine. 4 5 6 Close the Front Cover. Open the Front Cover by pinching the Cover Release Lever (1). Press any key. Confirm that the data scanned before the multifeed was detected has been saved, and then start scanning again at the next page or the beginning of the document.
Multifeed damage to the machine. Important Remove any paper from the document feeder before closing the Front Cover. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter7_4.
Change Scan Settings Change Scan Settings Use ControlCenter4 to change the advanced settings for the scan features. 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Change Scan Settings 4 Change the settings. The following settings can be changed. Setting File Type Description Select the file type you want to use for the scanned data. Applicable Feature Image OCR E-mail File Yes Yes Yes Yes Note • To save the document as a password-protected PDF, select Secure PDF (*.pdf) from the File (Set PDF Type drop-down list, click the Password) button, and enter the password. • Searchable PDF is a file format that includes the text data layer over a scanned image.
Change Scan Settings Target Application Select the destination application from the drop-down list. Yes Yes - - OCR Language Set to match the language of the scanned document’s text. - Yes - - File Name Click the Change button for Image, OCR or E-mail. Enter a prefix for the file name if needed. Yes Yes Yes Yes Show Save As Window If you want to specify the destination of the scanned image every time you scan, check the Show Save As Window.
Change Scan Settings Auto Automatically selects suitable colors for your document. Document Size Document size is set to Auto by default. You can scan Yes documents of any size without making any adjustments to Document Size. For faster scan speeds you can select the exact size of your document from the Document Size drop down list. Yes Yes Yes Note • If you select a 1 to 2 document size, the scanned image will be divided into two documents that are half the size of the setting.
Change Scan Settings setting Scan Type to Auto, Gray (Error Diffusion), True Gray or 24bit Color. Continuous Scanning Lets you scan multiple pages. After the page is Yes scanned, you can select to continue scanning or finish. Using this method, you can scan more pages than the maximum capacity of the document feeder. Yes Yes Yes Yes Yes Yes Yes You can scan the following documents using the Yes Carrier Sheet.
Change Scan Settings • Multifeed Detection: Off • Automatic Image Rotation: Off Note • If you want to scan a plastic card with different settings, set Plastic Card Mode off, Resolution to 600 dpi, and Multifeed Detection to Off. • Load only one plastic card at a time. Default Restore all settings to their factory default values. Yes 5 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 6 Change the settings. The following settings can be changed.
Change Scan Settings Scanning Results 7 8 pages skipped on your computer screen. Click the OK button to close the Advanced Settings dialog box. Click the OK button to close the settings dialog box. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_27.
Change Scan Settings Change Scan Settings Use ControlCenter2 to change the advanced settings for the scan features. 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Change Scan Settings 3 Change the settings in the Software Button tab. The following settings can be changed. Setting Target Application Description You can select which application is used to open scanned data. Only applications installed on your computer can be selected. • Add button You can add an application to the drop-down list. Enter the Application Name (up to 30 characters) and select your preferred application by clicking the Browse button. Also select the File Type from the drop-down list.
Change Scan Settings Select the Application Name and click the Delete button. File Type Select the file type you want to use for the scanned data. Yes Yes Yes Yes Yes - Yes Yes Note • To save the document as a password-protected PDF, select Secure PDF (*.pdf) for File Type and then enter the password in the Set PDF Password dialog box. • Searchable PDF is a file format that includes the text data layer over a scanned image. This layer allows you to search the text on the image data.
Change Scan Settings Destination File Path Click the Change button and then the Browse button to change the folder you would like to save your scanned document to. Yes Yes Yes - Destination Folder Click Browse and browse to the folder you would like to save your scanned document to. Check Show Folder to automatically display the destination folder after scanning. - - - Yes Resolution You can select a scanning resolution from the Resolution drop-down list.
Change Scan Settings images will be combined into one document. Brightness Adjust the setting (0 to 100) to get the best image. The Yes default value of 50 represents an average and is usually suitable for most images. You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the scanned image is too light, set a lower Brightness level and scan the document again. If the image is too dark, set a higher Brightness level and scan the document again.
Change Scan Settings Fold the document in half and insert it in the Carrier Sheet for 2-sided (duplex) scanning, then both front and back pages will be combined into a single page. • Important documents (photos, contracts) • Thin paper (receipts) • Irregular-shaped paper (clippings) Note • Load only one Carrier Sheet at a time. • Set the document in the center of the Carrier Sheet and align the top of the document with the top of the Carrier Sheet.
Change Scan Settings 5 Change the settings. The following settings can be changed. Setting Applicable Feature Image OCR E-mail File Corrects the skew (within 5 degrees) of the scanned data. Yes Yes Yes Yes Automatic Image Changes the direction of the document based on the Rotation text orientation.
Change Scan Settings Change Scan Settings 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. 2 While holding down the Control key click a button for the Scan-to action you want to change (Image, OCR, Email, or File).
Change Scan Settings 4 Change the settings. The following settings can be changed. Setting Target Application Description You can select which application is used to open scanned data. Only applications installed on your computer can be selected. • Add button You can add an application to the drop-down list. Enter the Application Name (up to 30 characters) and select your preferred application by clicking the Browse button. Also select the File Type from the drop-down list.
Change Scan Settings button. File Type Select the file type you want to use for the scanned data. Yes Yes Yes Yes Yes - Yes Yes Note • To save the document as a password-protected PDF, select Secure PDF (*.pdf) for File Type and then enter the password in the Set PDF Password dialog box. • Searchable PDF is a file format that includes the text data layer over a scanned image. This layer allows you to search the text on the image data.
Change Scan Settings Destination Folder Click Browse and browse to the folder you would like to save your scanned document to. Check Show Folder to automatically display the destination folder after scanning. - - - Yes Resolution You can select a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory and transfer time, but produce a finer scanned image. Yes Yes Yes Yes Scan Type Lets you select from a range of scan color depth.
Change Scan Settings Brightness Adjust the setting (0 to 100) to get the best image. The Yes default value of 50 represents an average and is usually suitable for most images. You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the scanned image is too light, set a lower Brightness level and scan the document again. If the image is too dark, set a higher Brightness level and scan the document again.
Change Scan Settings • Load only one Carrier Sheet at a time. • Set the document in the center of the Carrier Sheet and align the top of the document with the top of the Carrier Sheet.
Change Scan Settings 7 8 Bleed Through Prevents the Bleed Through phenomenon on a twoYes Prevention/Base sided document, and also allows you to remove the Color Removal base color of documents such as newspapers to make the scanned data more recognizable. Yes Yes Yes Blank Page Skip Removes blank pages of the document from the scanning results. Yes Yes Yes Yes Multifeed Detection Yes Uses a ultrasonic sensor to detect when a multifeed has occurred.
Acceptable Document Acceptable Document • Acceptable Document • Document Suitable for Carrier Sheet • Carrier Sheet Attentions • Unsupported Documents Note Do not load documents that contain multiple page thicknesses, paper qualities, etc. Acceptable Document Standard Paper Thick Paper Length 2.76 in. to 11.7 in. (70 mm to 297 mm) Width 2.0 in. to 8.5 in. (51 mm to 215.9 mm) Weight 14 lb to 29 lb (52 g/m 2 to 110 g/m 2) Thickness 3 mil to 5 mil (0.08 mm to 0.
Acceptable Document Long Paper Maximum Number of Documents Total thickness of no more than 0.2 in. (5 mm), no more than 25 sheets Length 11.7 in. to 34.0 in. (297 mm to 863 mm) Width 2.0 in. to 8.5 in. (51 mm to 215.9 mm) Weight 14 lb to 29 lb (52 g/m 2 to 110 g/m 2) Thickness 3 mil to 5 mil (0.08 mm to 0.12 mm) To scan a thinner document than this thickness, use the Carrier Sheet. See Loading Receipts and Other Thin Documents.
Acceptable Document Carrier Sheet Thickness Total thickness of no more than 24 mil (0.6 mm) (one 12 mil (0.3 mm) document plus the carrier sheet) Maximum Number of Documents 1 page Note A Carrier Sheet can be used when saving the scanned image to your computer. Check the Carrier Sheet Mode check box in the setting dialog box. To change the settings, do one of the following: • See Custom Scan Settings to scan using ControlCenter4 Home Mode (Windows ®) and follow the steps.
Check the Serial Number and ROM Version Check the Serial Number and ROM Version • Check the Serial Number • Check the ROM Version Check the Serial Number 1 Start the ControlCenter application. • Windows® (1) Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by double-clicking the (2) (ControlCenter4) icon in the task tray.
Check the Serial Number and ROM Version 2 Click the Remote Setup button. The Remote Setup window will appear. Note You can also start Remote Setup by following the instructions below: • Windows® Click Start, All Programs, Brother, ADS-XXXX, and Remote Setup. • Macintosh Double-click the RemoteSetup icon located in Macintosh HD/Applications/Brother. 3 Select Machine Info. in the folder tree. The window will display the Serial Number.
Check the Serial Number and ROM Version Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter7_8.
Interfaces Interfaces USB Hi-Speed USB 2.0 12 Use a USB 2.0 cable (Type A/B) that is no more than 6 feet (2.0 meters) long. 1 Your machine has a Hi-Speed USB 2.0 interface. The machine can also be connected to a computer that has a USB 1.1 interface. 2 Third party USB ports are not supported. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/appendix11_3.
Create a Custom Button in Custom Tab Create a Custom Button in Custom Tab 1 2 Create a Custom tab. Right-click the area inside the tab and select Create custom button. Select a button you want to create from the menu. The settings dialog box will appear. Note You can also copy a custom button by selecting Copy custom button from the right-click context menu. 3 Enter the button name and change the settings if needed. Click the OK button. (The setting options vary depending on the button you created.
Create a Custom Button in Custom Tab Note You can change or remove the tab, button or settings you created. Click Configuration and continue as prompted. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_4_2.
Scan to PDF Scan to PDF You can scan and save documents as PDF files. 1 2 Load your document. Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. 3 While holding down the Control key click the Image button in the SCAN tab.
Scan to PDF 4 Select PDF (*.pdf) from the File Type drop-down list. Note • To save the document as a password-protected PDF, select Secure PDF (*.pdf) for File Type and then enter the password in the Set PDF Password dialog box. • Searchable PDF is a file format that includes the text data layer over a scanned image. This layer allows you to search the text on the image data. The OCR language setting must be set to match the language you want to make the searchable PDF for.
Scan to PDF the Scan to OCR action. • Several file types such as TIFF, TIFF Multi-Page, PDF, Secure PDF and JPEG support file size compression. Select Uncompressed or Compressed to adjust the file size for TIFF or TIFF Multi-Page. For PDF, Secure PDF and JPEG, use the slider to adjust the file size. 5 6 Change other settings if needed (see Change Scan Settings). Click the Image button in the SCAN tab. The message dialog appears. Click the Start Scanning button. The machine starts scanning.
Scan to an Application Scan to an Application The Image button lets you scan an image directly into your graphics application for image editing. 1 2 Load your document. Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan to E-mail Attachment Scan to E-mail Attachment The E-mail button lets you scan a document to your default E-mail application, so you can send the scanned job as an attachment. 1 2 Load your document. Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother.
Scan to an Editable Text File (OCR) Scan to an Editable Text File (OCR) The OCR button lets you scan a document and convert it to text. This text can be edited using your favorite word processing software. Note • Presto! PageManager must be installed on your computer from the supplied DVD-ROM. • The Scan to OCR function is available for English, French, German, Dutch, Italian, Spanish, Brazilian Portuguese, Danish, Swedish, Japanese, Traditional Chinese, Simplified Chinese and Korean.
Scan to an Editable Text File (OCR) file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_5.
Save Scanned Documents to a Folder Save Scanned Documents to a Folder The File button lets you scan an image and save it to a folder on your hard disk in one of the file types shown in the file attachment list. 1 2 Load your document. Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother.
Scan Color and Black-and-White Pages at the Same Time Scan Color and Black-and-White Pages at the Same Time 1 2 Load your document. Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Color and Black-and-White Pages at the Same Time 4 5 6 Select Auto from the Scan Type drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 3. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_7.
Scan Pages of Different Sizes at the Same Time Scan Pages of Different Sizes at the Same Time 1 Load your document. Note Narrow documents should be inserted straight and as close to the center of the machine as possible. 2 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother.
Scan Pages of Different Sizes at the Same Time 4 5 6 Select Auto from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 3. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_8.
Scan Business Cards Scan Business Cards 1 2 Load your document (see Loading Business Cards and Plastic Cards). Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Business Cards 4 5 6 Select Business Card from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 3. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again.
Scan Business Cards file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_9.
Scan Two Pages and Combine Them on One Page (2 in 1) Scan Two Pages and Combine Them on One Page (2 in 1) 1 2 Load your document. Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Two Pages and Combine Them on One Page (2 in 1) 4 Select 2 in 1 from the Document Size drop-down list. Note To do 2 in 1 scanning, uncheck the Automatic Image Rotation check box in the Advanced Settings dialog box. 5 6 Change other settings if needed (see Change Scan Settings). Click the button you selected in step 3. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again.
Scan Two Pages and Combine Them on One Page (2 in 1) file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_10.
Scan Documents Wider than Letter Scan Documents Wider than Letter 1 Load the Carrier Sheet (see Loading Documents Wider than Letter Size). Note Load only one Carrier Sheet at a time. 2 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother.
Scan Documents Wider than Letter 4 5 Check the Carrier Sheet Mode check box. Check the Duplex(two-sided) Scanning check box and then select the Long-edge binding option. Note If you cannot check the Duplex(two-sided) Scanning check box, select a document size other than Long Paper from the Document Size drop-down list. 6 7 8 Select a 2 in 1 document size from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 3.
Scan Documents Wider than Letter Check the Don’t show me again. check box not to show the message dialog again. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_11.
Scan Documents Longer than Letter Scan Documents Longer than Letter 1 Load your document. Note Load only one document at a time. 2 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Documents Longer than Letter 4 Select Long Paper (Normal Width) or Long Paper (Narrow Width) from the Document Size drop-down list. Note • Each Long Paper option can scan a large document up to the following size: Long Paper (Normal Width): 8 1/2 × 34.0 in. (215.9 × 863.0 mm) Long Paper (Narrow Width): 4 1/4 × 34.0 in. (107.9 × 863.0 mm) • If you cannot select Long Paper, uncheck the Duplex(two-sided) Scanning and Auto Deskew check box.
Scan Documents Longer than Letter Note Support the document with your hand if the document is longer than the Top Cover. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_12.
Scan Documents with More than 50 Pages Scan Documents with More than 50 Pages 1 Load your document. Note Load no more than 50 pages at a time. 2 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Documents with More than 50 Pages 4 5 6 Check the Continuous Scanning check box. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 3. The message dialog appears. Click the Start Scanning button. The machine starts scanning. When the machine has finished scanning, a dialog asks you if you want to continue scanning. Do one of the following: • If you are finished scanning, click Finish.
Scan Documents with More than 50 Pages file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_13.
Scan Both Sides of a Page Automatically Scan Both Sides of a Page Automatically 1 2 Load your documents. Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Both Sides of a Page Automatically 4 Check the Duplex(two-sided) Scanning check box. Note If you cannot check the Duplex(two-sided) Scanning check box, select a document size other than Long Paper from the Document Size drop-down list. 5 Select Long-edge binding or Short-edge binding depending for the document layout as shown in the following table. 2-sided (Duplex) Scan Setting Original Layout Scan Result Long-edge binding file:///C|/Documents%20and%20Settings/mcampbell.
Scan Both Sides of a Page Automatically Short-edge binding 6 Change other settings if needed (see Change Scan Settings). You have now changed the default settings for your chosen Scan-to action. These settings will be used the next time you click (Image, OCR, E-mail, or File). Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_14.
Scan Specific/irregular-sized Documents Using the Carrier Sheet Scan Specific/irregular-sized Documents Using the Carrier Sheet 1 Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 2 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon.
Scan Specific/irregular-sized Documents Using the Carrier Sheet 4 5 6 7 Check the Carrier Sheet Mode check box. Select a document size other than Auto from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 3. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again.
Scan Plastic Cards Scan Plastic Cards 1 Load a plastic card (see Loading Business Cards and Plastic Cards). Note Load only one plastic card at a time. 2 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Plastic Cards 4 5 6 Check the Plastic Card Mode check box. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 3. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Important If a feed error should occur while scanning, open the front cover and carefully remove the plastic card in order to prevent damage to the card. Note • Check the Don’t show me again. check box not to show the message dialog again.
Scan Plastic Cards Duplex(two-sided) Scanning: On (Short-edge binding) Auto Deskew: Off Multifeed Detection: Off Automatic Image Rotation: Off Original Layout Scan Result Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_16.
Correct Page Skew Correct Page Skew 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Correct Page Skew 3 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 4 5 Check the Auto Deskew check box and then click the OK button. Click the OK button. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_17.
Correct Page Skew file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_17.
Delete Blank Pages Delete Blank Pages 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Delete Blank Pages 3 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 4 5 Check the Blank Page Skip check box and then click the OK button. Click the OK button. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_18.
Delete Blank Pages Note The Blank Page Skip feature may not remove blank pages depending on the document. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_18.
Change Document Orientation to Match the Text Change Document Orientation to Match the Text 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Change Document Orientation to Match the Text 3 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 4 5 Check the Automatic Image Rotation check box and then click the OK button. Click the OK button. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_19.
Change Document Orientation to Match the Text file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_19.
Detect Overlapping (Multifeed) Pages Detect Overlapping (Multifeed) Pages 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Detect Overlapping (Multifeed) Pages 3 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 4 5 Check the Multifeed Detection check box and then click the OK button. Click the OK button. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_20.
Detect Overlapping (Multifeed) Pages Note The Multifeed Detection feature does not support documents narrower than 2 3/4 in. (70 mm) wide. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_20.
Scan Pages Laid on Top of Each Other Scan Pages Laid on Top of Each Other 1 Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 2 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother.
Scan Pages Laid on Top of Each Other 4 5 6 7 Check the Carrier Sheet Mode check box. Select a document size other than Auto from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 3. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Scan Envelopes Scan Envelopes 1 Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 2 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Envelopes 4 5 6 7 Check the Carrier Sheet Mode check box. Select a document size other than Auto from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 3. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Prevent Bleed Through Prevent Bleed Through 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Prevent Bleed Through 3 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 4 5 Check the Bleed Through Prevention/Base Color Removal check box and then click the OK button. Click the OK button. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_23.
Prevent Bleed Through Note When you scan newspapers or magazines with the Bleed Through Prevention/Base Color Removal feature, the scanned data can be faded. To avoid faded scanned data, select a higher resolution. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_23.
Remove the Background Color (Base Color Removal) and Make Documents Easier to Read Remove the Background Color (Base Color Removal) and Make Documents Easier to Read 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Remove the Background Color (Base Color Removal) and Make Documents Easier to Read 3 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 4 5 Check the Bleed Through Prevention/Base Color Removal check box and then click the OK button. Click the OK button. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_24.
Remove the Background Color (Base Color Removal) and Make Documents Easier to Read Note When you scan newspapers or magazines with the Bleed Through Prevention/Base Color Removal feature, the scanned data can be faded. To avoid faded scanned data, select a higher resolution. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_24.
View the Number of Scanned Pages View the Number of Scanned Pages 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
View the Number of Scanned Pages 3 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 4 5 Check the Display Scanning Results check box and then click the OK button. Click the OK button. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_25.
View the Number of Scanned Pages file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_25.
Scan Photos and Graphics Scan Photos and Graphics To scan photos or graphics, you should select the Scan to Image feature. Your document will be scanned and sent directly to your USB connected computer. 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother.
Scan Photos and Graphics 4 5 6 7 8 Click the OK button to close the Remote Setup window. Click the SCAN tab on the ControlCenter2 window. While holding down the Control key click the Image button. The Scan To Image dialog box will appear. Click the Device Button tab. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_3_2.
Scan Photos and Graphics 9 10 11 Change other settings if needed (see Change Scan Settings). Load your document. Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_3_2.
Scan to E-mail attachment Scan to E-mail attachment You can scan a document and add it as an attachment to a message in your default E-mail application. 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan to E-mail attachment 5 6 Click the OK button to close the Remote Setup window. 7 8 While holding down the Control key click the E-mail button. The Scan To E-mail dialog box will appear. Click the SCAN tab on the ControlCenter2 window. Click the Device Button tab. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_3_3.
Scan to E-mail attachment 9 10 11 Change other settings if needed (see Change Scan Settings). Load your document. Press Scan to PC. The machine starts scanning the document, creates a file attachment, and launches your Email application displaying the new message waiting to be addressed. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_3_3.
Scan to an Editable Text File (OCR) Scan to an Editable Text File (OCR) Your machine can convert characters in a scanned document to text data by using optical character recognition (OCR) technology. This text can be edited using your favorite word processing software. Note • Presto! PageManager must be installed on your computer from the supplied DVD-ROM.
Scan to an Editable Text File (OCR) 4 5 6 Select OCR from the drop-down list. 7 8 While holding down the Control key click the OCR button. The Scan To OCR dialog box will appear. Click the OK button to close the Remote Setup window. Click the SCAN tab on the ControlCenter2 window. Click the Device Button tab. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_3_4.
Scan to an Editable Text File (OCR) 9 10 11 Change other settings if needed (see Change Scan Settings). Load your document. Press Scan to PC. The machine scans the document, converts it into editable text, then sends it to your default word processing application. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_3_4.
Change the Feature Assigned to the Scan to PC Key to set the Default Scan-to Action Change the Feature Assigned to the Scan to PC Key to set the Default Scan-to Action 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Change the Feature Assigned to the Scan to PC Key to set the Default Scan-to Action Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_3_5.
Scan Pages of Different Sizes at the Same Time Scan Pages of Different Sizes at the Same Time 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Pages of Different Sizes at the Same Time 4 5 6 Select Auto from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Load your document. Note Narrow documents should be inserted straight and as close to the center of the machine as possible. 7 Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_2.
Scan Business Cards Scan Business Cards 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. 2 While holding down the Control key click a button for the Scan-to action you want to change (Image, OCR, Email, or File).
Scan Business Cards 4 5 6 7 Select Business Card from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Load your document (see Loading Business Cards and Plastic Cards). Press Scan to PC. The machine starts scanning. Note Certain kinds of business cards and thick paper might be detected as being multi-fed by the Multifeed detector, even though they were fed properly. In this case, set Multifeed Detection to Off.
Scan Two Pages and Combine Them on One Page (2 in 1) Scan Two Pages and Combine Them on One Page (2 in 1) 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Two Pages and Combine Them on One Page (2 in 1) 4 Select 2 in 1 from the Document Size drop-down list. Note To do 2 in 1 scanning, uncheck the Automatic Image Rotation check box in the Advanced Settings dialog box. 5 6 7 Change other settings if needed (see Change Scan Settings). Load your document. Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_4.
Scan Documents Wider than Letter Scan Documents Wider than Letter 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Documents Wider than Letter 4 5 Check the Carrier Sheet Mode check box. Check the Duplex(two-sided) Scanning check box and then select the Long-edge binding option. Note If you cannot check the Duplex(two-sided) Scanning check box, select a document size other than Long Paper from the Document Size drop-down list. 6 7 8 Select a 2 in 1 document size from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings).
Scan Documents Wider than Letter 9 Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_5.
Scan Documents Longer than Letter Scan Documents Longer than Letter 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Documents Longer than Letter 4 Select Long Paper (Normal Width) or Long Paper (Narrow Width) from the Document Size drop-down list. Note • Each Long Paper option can scan a large document up to the following size: Long Paper (Normal Width): 8 1/2 × 34.0 in. (215.9 × 863.0 mm) Long Paper (Narrow Width): 4 1/4 × 34.0 in. (107.9 × 863.0 mm) • If you cannot select Long Paper, uncheck the Duplex(two-sided) Scanning and Auto Deskew check box. 5 6 Load your document. Press Scan to PC.
Scan Both Sides of a Page Automatically Scan Both Sides of a Page Automatically 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Both Sides of a Page Automatically 4 Check the Duplex(two-sided) Scanning check box. Note If you cannot check the Duplex(two-sided) Scanning check box, select a document size other than Long Paper from the Document Size drop-down list. 5 Select Long-edge binding or Short-edge binding depending for the document layout as shown in the following table. 2-sided (Duplex) Scan Setting Original Layout Scan Result Long-edge binding file:///C|/Documents%20and%20Settings/mcampbell.
Scan Both Sides of a Page Automatically Short-edge binding 6 7 8 Change other settings if needed (see Change Scan Settings). Load your document. Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_7.
Scan Specific/irregular-sized Documents Using the Carrier Sheet Scan Specific/irregular-sized Documents Using the Carrier Sheet 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Specific/irregular-sized Documents Using the Carrier Sheet 4 5 6 Check the Carrier Sheet Mode check box. Change other settings if needed (see Change Scan Settings). Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 7 Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_8.
Scan Plastic Cards Scan Plastic Cards 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. 2 While holding down the Control key click a button for the Scan-to action you want to change (Image, OCR, Email, or File).
Scan Plastic Cards 4 5 6 Check the Plastic Card Mode check box. Change other settings if needed (see Change Scan Settings). Load a plastic card (see Loading Business Cards and Plastic Cards). Note Load only one plastic card at a time. 7 Press Scan to PC. The machine starts scanning. Important If a feed error should occur while scanning, open the front cover and carefully remove the plastic card in order to prevent damage to the card. Note file:///C|/Documents%20and%20Settings/mcampbell.
Scan Plastic Cards Plastic Card Mode automatically uses these settings: Resolution: 600 x 600 dpi Document Size: 2 in 1 (Business Card) Duplex(two-sided) Scanning: On (Short-edge binding) Auto Deskew: Off Multifeed Detection: Off Automatic Image Rotation: Off Original Layout Scan Result Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_9.
Correct Page Skew Correct Page Skew 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. 2 While holding down the Control key click a button for the Scan-to action you want to change (Image, OCR, Email, or File).
Correct Page Skew 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Auto Deskew check box and then click the OK button. Change other settings if needed (see Change Scan Settings). Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_10.
Correct Page Skew file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_10.
Delete Blank Pages Delete Blank Pages 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. 2 While holding down the Control key click a button for the Scan-to action you want to change (Image, OCR, Email, or File).
Delete Blank Pages 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Blank Page Skip check box and then click the OK button. Change other settings if needed (see Change Scan Settings). file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_11.
Delete Blank Pages Note The Blank Page Skip feature may not remove blank pages depending on the document. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_11.
Change Document Orientation to Match the Text Change Document Orientation to Match the Text 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Change Document Orientation to Match the Text 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Automatic Image Rotation check box and then click the OK button. Change other settings if needed (see Change Scan Settings). Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_12.
Change Document Orientation to Match the Text file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_12.
Detect Overlapping (Multifeed) Pages Detect Overlapping (Multifeed) Pages 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Detect Overlapping (Multifeed) Pages 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Multifeed Detection check box and then click the OK button. Change other settings if needed (see Change Scan Settings). file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_13.
Detect Overlapping (Multifeed) Pages Note The Multifeed Detection feature does not support documents narrower than 2 3/4 in. (70 mm) wide. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_13.
Scan Pages Laid on Top of Each Other Scan Pages Laid on Top of Each Other 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Scan Pages Laid on Top of Each Other 4 5 6 Check the Carrier Sheet Mode check box. Change other settings if needed (see Change Scan Settings). Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 7 Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_14.
Scan Envelopes Scan Envelopes 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. 2 While holding down the Control key click a button for the Scan-to action you want to change (Image, OCR, Email, or File).
Scan Envelopes 4 5 6 Check the Carrier Sheet Mode check box. Change other settings if needed (see Change Scan Settings). Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 7 Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_15.
Prevent Bleed Through Prevent Bleed Through 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. 2 While holding down the Control key click a button for the Scan-to action you want to change (Image, OCR, Email, or File).
Prevent Bleed Through 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Bleed Through Prevention/Base Color Removal check box and then click the OK button. Change other settings if needed (see Change Scan Settings). file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_16.
Prevent Bleed Through Note When you scan newspapers or magazines with the Bleed Through Prevention/Base Color Removal feature, the scanned data can be faded. To avoid faded scanned data, select a higher resolution. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_16.
Remove the Background Color (Base Color Removal) and Make Documents Easier to Read Remove the Background Color (Base Color Removal) and Make Documents Easier to Read 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
Remove the Background Color (Base Color Removal) and Make Documents Easier to Read 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Bleed Through Prevention/Base Color Removal check box and then click the OK button. Change other settings if needed (see Change Scan Settings). file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_17.
Remove the Background Color (Base Color Removal) and Make Documents Easier to Read Note When you scan newspapers or magazines with the Bleed Through Prevention/Base Color Removal feature, the scanned data can be faded. To avoid faded scanned data, select a higher resolution. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_17.
View Scanned Documents on Your Computer Screen View Scanned Documents on Your Computer Screen 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar.
View Scanned Documents on Your Computer Screen 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Display Scanning Results check box and then click the OK button. Change other settings if needed (see Change Scan Settings). Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_18.
View Scanned Documents on Your Computer Screen file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_4_18.
Scan Pages of Different Sizes at the Same Time Scan Pages of Different Sizes at the Same Time 1 Start the ControlCenter application. • Windows® (1) Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by double-clicking the (2) (ControlCenter4) icon in the task tray. Click the Device Settings tab (the example below uses Home Mode).
Scan Pages of Different Sizes at the Same Time 2 Click the Remote Setup button. The Remote Setup window will appear. Note You can also start Remote Setup by following the instructions below: • Windows® Click Start, All Programs, Brother, ADS-XXXX, and Remote Setup. • Macintosh Double-click the RemoteSetup icon located in Macintosh HD/Applications/Brother. 3 Select Scan to USB in the folder tree. • Windows® • Macintosh file:///C|/Documents%20and%20Settings/mcampbell.
Scan Pages of Different Sizes at the Same Time 4 Select Auto from the Document Size drop-down list. Note Select Off from the Auto Deskew drop-down list if the Document Size drop-down list is grayed out. 5 6 Change other settings if needed (see Change Scan Settings). Load your document. Note Narrow documents should be inserted straight and as close to the center of the machine as possible. 7 Press Scan to USB on the control panel. The machine starts scanning.
Scan Business Cards Scan Business Cards 1 Start the ControlCenter application. • Windows® (1) Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by double-clicking the (2) (ControlCenter4) icon in the task tray. Click the Device Settings tab (the example below uses Home Mode). • Macintosh (1) Click the (ControlCenter2) icon in the menu bar and then select Open.
Scan Business Cards 2 Click the Remote Setup button. The Remote Setup window will appear. Note You can also start Remote Setup by following the instructions below: • Windows® Click Start, All Programs, Brother, ADS-XXXX, and Remote Setup. • Macintosh Double-click the RemoteSetup icon located in Macintosh HD/Applications/Brother. 3 Select Scan to USB in the folder tree. • Windows® • Macintosh file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_5_3.
Scan Business Cards 4 Select Business Card from the Document Size drop-down list. Note Select Off from the Auto Deskew drop-down list if the Document Size drop-down list is grayed out. 5 6 7 Change other settings if needed (see Change Scan Settings). Load your document (see Loading Business Cards and Plastic Cards). Press Scan to USB on the control panel. The machine starts scanning.
Scan Both Sides of a Page Automatically Scan Both Sides of a Page Automatically 1 Start the ControlCenter application. • Windows® (1) Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by double-clicking the (2) (ControlCenter4) icon in the task tray. Click the Device Settings tab (the example below uses Home Mode).
Scan Both Sides of a Page Automatically 2 Click the Remote Setup button. The Remote Setup window will appear. Note You can also start Remote Setup by following the instructions below: • Windows® Click Start, All Programs, Brother, ADS-XXXX, and Remote Setup. • Macintosh Double-click the RemoteSetup icon located in Macintosh HD/Applications/Brother. 3 Select Scan to USB in the folder tree. • Windows® • Macintosh file:///C|/Documents%20and%20Settings/mcampbell.
Scan Both Sides of a Page Automatically 4 Select On : Long-edge binding or On : Short-edge binding from the Duplex Scanning drop-down list depending for the document layout as shown in the following table. 2-sided (Duplex) Scan Setting Original Layout Scan Result Long-edge binding Short-edge binding 5 6 7 Change other settings if needed (see Change Scan Settings). Load your document. Press Scan to USB on the control panel. The machine starts scanning.
Scan Both Sides of a Page Automatically file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_5_4.
Correct Skewed Documents Correct Skewed Documents 1 Start the ControlCenter application. • Windows® (1) Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by double-clicking the (2) (ControlCenter4) icon in the task tray. Click the Device Settings tab (the example below uses Home Mode). • Macintosh (1) Click the (ControlCenter2) icon in the menu bar and then select Open.
Correct Skewed Documents 2 Click the Remote Setup button. The Remote Setup window will appear. Note You can also start Remote Setup by following the instructions below: • Windows® Click Start, All Programs, Brother, ADS-XXXX, and Remote Setup. • Macintosh Double-click the RemoteSetup icon located in Macintosh HD/Applications/Brother. 3 Select Scan to USB in the folder tree. • Windows® • Macintosh file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_5_5.
Correct Skewed Documents 4 5 Select On from the Auto Deskew drop-down list. Change other settings if needed (see Change Scan Settings). Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_5_5.
Delete Blank Pages Delete Blank Pages 1 Start the ControlCenter application. • Windows® (1) Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by double-clicking the (2) (ControlCenter4) icon in the task tray. Click the Device Settings tab (the example below uses Home Mode). • Macintosh (1) Click the (ControlCenter2) icon in the menu bar and then select Open.
Delete Blank Pages 2 Click the Remote Setup button. The Remote Setup window will appear. Note You can also start Remote Setup by following the instructions below: • Windows® Click Start, All Programs, Brother, ADS-XXXX, and Remote Setup. • Macintosh Double-click the RemoteSetup icon located in Macintosh HD/Applications/Brother. 3 Select Scan to USB in the folder tree. • Windows® • Macintosh file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_5_6.
Delete Blank Pages 4 5 Select On from the Blank Page Skip drop-down list. Change other settings if needed (see Change Scan Settings). Note The Blank Page Skip feature may not remove blank pages depending on the document. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_5_6.
Turn the AutoLoad feature off (ControlCenter2) Turn the AutoLoad feature off (ControlCenter2) ControlCenter2 runs automatically each time you start your computer. If you do not want ControlCenter2 to run automatically, do the following. 1 Click the (ControlCenter2) icon in the menu bar and then select Preferences. The ControlCenter2 Preferences window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon.
Scan Documents (Scan to PDF) Scan Documents (Scan to PDF) 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 3 Select the Scan tab.
Scan Documents (Scan to PDF) compression. Select Uncompressed or Compressed to adjust the file size for TIFF or TIFF Multi-Page. For PDF, Secure PDF and JPEG, use the slider to adjust the file size. 6 7 Change other settings if needed (see Change Scan Settings). Click the (Image) button. The message dialog appears. Click the Start Scanning button. The machine starts scanning, and the image will be opened in the application you have chosen. Note Check the Don’t show me again.
Scan Documents (Other File Types) Scan Documents (Other File Types) 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 3 Select the Scan tab.
Scan Documents (Other File Types) file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_3.
Scan Color and Black-and-White Pages at the Same Time Scan Color and Black-and-White Pages at the Same Time 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Color and Black-and-White Pages at the Same Time 5 6 7 Select Auto from the Scan Type drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 4. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_4.
Scan Pages of Different Sizes at the Same Time Scan Pages of Different Sizes at the Same Time 1 Load your document. Note Narrow documents should be inserted straight and as close to the center of the machine as possible. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear.
Scan Pages of Different Sizes at the Same Time 5 6 7 Select Auto from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 4. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_5.
Scan Business Cards Scan Business Cards 1 2 Load your document (see Loading Business Cards and Plastic Cards). Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Scan Business Cards 5 6 7 Select Business Card from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 4. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again.
Scan Two Pages and Combine Them on One Page (2 in 1) Scan Two Pages and Combine Them on One Page (2 in 1) 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Two Pages and Combine Them on One Page (2 in 1) 5 Select 2 in 1 from the Document Size drop-down list. Note To do 2 in 1 scanning, uncheck the Automatic Image Rotation check box in the Advanced Settings dialog box. 6 7 Change other settings if needed (see Change Scan Settings). Click the button you selected in step 4. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again.
Scan Documents Wider than Letter Scan Documents Wider than Letter 1 Load the Carrier Sheet (see Loading Documents Wider than Letter Size). Note Load only one Carrier Sheet at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Documents Wider than Letter 5 6 Check the Carrier Sheet Mode check box. Check the Duplex(two-sided) Scanning check box and then select the Long-edge binding option. Note If you cannot check the Duplex(two-sided) Scanning check box, select a document size other than Long Paper from the Document Size drop-down list. 7 8 9 Select a 2 in 1 document size from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 4.
Scan Documents Longer than Letter Scan Documents Longer than Letter 1 Load your document. Note Load only one document at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Documents Longer than Letter 5 Select Long Paper (Normal Width) or Long Paper (Narrow Width) from the Document Size drop-down list. Note • Each Long Paper option can scan a large document up to the following size: Long Paper (Normal Width): 8 1/2 × 34.0 in. (215.9 × 863.0 mm) Long Paper (Narrow Width): 4 1/4 × 34.0 in. (107.9 × 863.0 mm) • If you cannot select Long Paper, uncheck the Duplex(two-sided) Scanning and Auto Deskew check box.
Scan Documents with More than 50 Pages Scan Documents with More than 50 Pages 1 Load your document. Note Load no more than 50 pages at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Documents with More than 50 Pages 5 6 7 Check the Continuous Scanning check box. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 4. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again. 8 When the machine has finished scanning, a dialog asks you if you want to continue scanning.
Scan Both Sides of a Page Automatically Scan Both Sides of a Page Automatically 1 2 Load your documents. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Scan Both Sides of a Page Automatically 6 Check the Duplex(two-sided) Scanning check box. Note If you cannot check the Duplex(two-sided) Scanning check box, select a document size other than Long Paper from the Document Size drop-down list. 7 Select Long-edge binding or Short-edge binding depending for the document layout as shown in the following table. 2-sided (Duplex) Scan Setting Original Layout Scan Result Long-edge binding Short-edge binding file:///C|/Documents%20and%20Settings/mcampbell.
Scan Both Sides of a Page Automatically 8 9 Change other settings if needed (see Change Scan Settings). Click the OK button. You have now changed the default settings for your chosen Scan-to action. These settings will be used the next time you click the scan option ( (Image), (OCR), (E-mail), or (File)). Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_11.
Scan Specific/irregular-sized Documents Using the Carrier Sheet Scan Specific/irregular-sized Documents Using the Carrier Sheet 1 Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear.
Scan Specific/irregular-sized Documents Using the Carrier Sheet 5 6 7 8 Check the Carrier Sheet Mode check box. Select a document size other than Auto from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 4. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again.
Scan Plastic Cards Scan Plastic Cards 1 Load a plastic card (see Loading Business Cards and Plastic Cards). Note Load only one plastic card at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Plastic Cards 5 6 7 Check the Plastic Card Mode check box. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 4. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Important If a feed error should occur while scanning, open the front cover and carefully remove the plastic card in order to prevent damage to the card. Note • Check the Don’t show me again. check box not to show the message dialog again.
Scan Plastic Cards Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_13.
Correct Page Skew Correct Page Skew 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Select the Scan tab.
Correct Page Skew 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Auto Deskew check box and then click the OK button. Click the OK button. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_14.
Delete Blank Pages Delete Blank Pages 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Select the Scan tab.
Delete Blank Pages 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Blank Page Skip check box and then click the OK button. Click the OK button. Note The Blank Page Skip feature may not remove blank pages depending on the document. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_15.
Change Document Orientation to Match the Text Change Document Orientation to Match the Text 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Select the Scan tab.
Change Document Orientation to Match the Text 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Automatic Image Rotation check box and then click the OK button. Click the OK button. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_16.
Detect Overlapping (Multifeed) Pages Detect Overlapping (Multifeed) Pages 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Select the Scan tab.
Detect Overlapping (Multifeed) Pages 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Multifeed Detection check box and then click the OK button. Click the OK button. Note The Multifeed Detection feature does not support documents narrower than 2 3/4 in. (70 mm) wide. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_17.
Scan Pages Laid on Top of Each Other Scan Pages Laid on Top of Each Other 1 Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Pages Laid on Top of Each Other 5 6 7 8 Check the Carrier Sheet Mode check box. Select a document size other than Auto from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 4. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Scan Envelopes Scan Envelopes 1 Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 2 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Envelopes 5 6 7 8 Check the Carrier Sheet Mode check box. Select a document size other than Auto from the Document Size drop-down list. Change other settings if needed (see Change Scan Settings). Click the button you selected in step 4. The message dialog appears. Click the Start Scanning button. The machine starts scanning. Note Check the Don’t show me again. check box not to show the message dialog again. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Prevent Bleed Through Prevent Bleed Through 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Select the Scan tab.
Prevent Bleed Through 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Bleed Through Prevention/Base Color Removal check box and then click the OK button. Click the OK button. Note When you scan newspapers or magazines with the Bleed Through Prevention/Base Color Removal feature, the scanned data can be faded. To avoid faded scanned data, select a higher resolution. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Remove the Background Color (Base Color Removal) and Make Documents Easier to Read Remove the Background Color (Base Color Removal) and Make Documents Easier to Read 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Remove the Background Color (Base Color Removal) and Make Documents Easier to Read 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Bleed Through Prevention/Base Color Removal check box and then click the OK button. Click the OK button. Note When you scan newspapers or magazines with the Bleed Through Prevention/Base Color Removal feature, the scanned data can be faded. To avoid faded scanned data, select a higher resolution.
View the Number of Scanned Pages View the Number of Scanned Pages 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Select the Scan tab.
View the Number of Scanned Pages 4 Click the Advanced Settings button. The Advanced Settings dialog box will appear. 5 6 Check the Display Scanning Results check box and then click the OK button. Click the OK button. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_22.
Scan to an Application Scan to an Application The 1 2 (Image) button lets you scan an image directly into your graphics application for image editing. Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan to E-mail Attachment Scan to E-mail Attachment The (E-mail) button lets you scan a document to your default E-mail application, so you can send the scanned job as an attachment. 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan to E-mail Attachment file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_24.
Scan to an Editable Text File (OCR) Scan to an Editable Text File (OCR) The (OCR) button lets you scan a document and convert it to text. This text can be edited using your favorite word processing software. Note Nuance™ PaperPort™12SE must be installed on your computer. 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear.
Scan to an Editable Text File (OCR) Check the Don’t show me again. check box not to show the message dialog again. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_25.
Save Scanned Documents to a Folder Save Scanned Documents to a Folder The (File) button lets you scan an image and save it to a folder on your hard disk in one of the file types shown in the file attachment list. 1 2 Load your document. Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear.
Save Scanned Documents to a Folder file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_26.
Scan Pages of Different Sizes at the Same Time Scan Pages of Different Sizes at the Same Time 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Scan Pages of Different Sizes at the Same Time 4 5 6 7 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). Select Auto from the Document Size drop-down list. Change other settings if needed (see Change Scan to PC Settings). Load your document. Note Narrow documents should be inserted straight and as close to the center of the machine as possible. 8 Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Scan Business Cards Scan Business Cards 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Click the Device Settings tab (the example below uses Home Mode).
Scan Business Cards 4 5 6 7 8 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). Select Business Card from the Document Size drop-down list. Change other settings if needed (see Change Scan to PC Settings). Load your document (see Loading Business Cards and Plastic Cards). Press Scan to PC. The machine starts scanning.
Scan Two Pages and Combine Them on One Page (2 in 1) Scan Two Pages and Combine Them on One Page (2 in 1) 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Scan Two Pages and Combine Them on One Page (2 in 1) 4 5 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). Select 2 in 1 from the Document Size drop-down list. Note To do 2 in 1 scanning, uncheck the Automatic Image Rotation check box in the Advanced Settings dialog box. 6 7 8 Change other settings if needed (see Change Scan to PC Settings). Load your document. Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Scan Documents Wider than Letter Scan Documents Wider than Letter 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Scan Documents Wider than Letter 4 5 6 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). Check the Carrier Sheet Mode check box. Check the Duplex(two-sided) Scanning check box and then select the Long-edge binding option. Note If you cannot check the Duplex(two-sided) Scanning check box, select a document size other than Long Paper from the Document Size drop-down list. 7 8 9 Select a 2 in 1 document size from the Document Size drop-down list.
Scan Documents Longer than Letter Scan Documents Longer than Letter 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Scan Documents Longer than Letter 4 5 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). Select Long Paper (Normal Width) or Long Paper (Narrow Width) from the Document Size drop-down list. Note • Each Long Paper option can scan a large document up to the following size: Long Paper (Normal Width): 8 1/2 × 34.0 in. (215.9 × 863.0 mm) Long Paper (Narrow Width): 4 1/4 × 34.0 in. (107.9 × 863.
Scan Both Sides of a Page Automatically Scan Both Sides of a Page Automatically 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Scan Both Sides of a Page Automatically 4 5 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). Check the Duplex(two-sided) Scanning check box. Note If you cannot check the Duplex(two-sided) Scanning check box, select a document size other than Long Paper from the Document Size drop-down list. 6 Select Long-edge binding or Short-edge binding depending for the document layout as shown in the following table.
Scan Both Sides of a Page Automatically 7 8 9 Change other settings if needed (see Change Scan to PC Settings). Load your document. Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_2_7.
Scan Specific/irregular-sized Documents Using the Carrier Sheet Scan Specific/irregular-sized Documents Using the Carrier Sheet 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Scan Specific/irregular-sized Documents Using the Carrier Sheet 4 5 6 7 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). Check the Carrier Sheet Mode check box. Change other settings if needed (see Change Scan to PC Settings). Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 8 Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Scan Plastic Cards Scan Plastic Cards 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Click the Device Settings tab (the example below uses Home Mode).
Scan Plastic Cards 4 5 6 7 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). Check the Plastic Card Mode check box. Change other settings if needed (see Change Scan to PC Settings). Load a plastic card (see Loading Business Cards and Plastic Cards). Note Load only one plastic card at a time. 8 Press Scan to PC. The machine starts scanning.
Scan Plastic Cards Original Layout Scan Result Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_2_9.
Correct Page Skew Correct Page Skew 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Click the Device Settings tab (the example below uses Home Mode).
Correct Page Skew 4 5 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). 6 7 Check the Auto Deskew check box and then click the OK button. Click the Advanced Settings button. The Advanced Settings dialog box will appear. Change other settings if needed (see Change Scan to PC Settings). Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_2_10.
Delete Blank Pages Delete Blank Pages 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Click the Device Settings tab (the example below uses Home Mode).
Delete Blank Pages 4 5 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). 6 7 Check the Blank Page Skip check box and then click the OK button. Click the Advanced Settings button. The Advanced Settings dialog box will appear. Change other settings if needed (see Change Scan to PC Settings). Note The Blank Page Skip feature may not remove blank pages depending on the document. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Change Document Orientation to Match the Text Change Document Orientation to Match the Text 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Change Document Orientation to Match the Text 4 5 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). 6 7 Check the Automatic Image Rotation check box and then click the OK button. Click the Advanced Settings button. The Advanced Settings dialog box will appear. Change other settings if needed (see Change Scan to PC Settings). Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_2_12.
Detect Overlapping (Multifeed) Pages Detect Overlapping (Multifeed) Pages 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Detect Overlapping (Multifeed) Pages 4 5 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). 6 7 Check the Multifeed Detection check box and then click the OK button. Click the Advanced Settings button. The Advanced Settings dialog box will appear. Change other settings if needed (see Change Scan to PC Settings). Note The Multifeed Detection feature does not support documents narrower than 2 3/4 in. (70 mm) wide.
Scan Pages Laid on Top of Each Other Scan Pages Laid on Top of Each Other 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
Scan Pages Laid on Top of Each Other 4 5 6 7 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). Check the Carrier Sheet Mode check box. Change other settings if needed (see Change Scan to PC Settings). Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 8 Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Scan Envelopes Scan Envelopes 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Click the Device Settings tab (the example below uses Home Mode).
Scan Envelopes 4 5 6 7 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). Check the Carrier Sheet Mode check box. Change other settings if needed (see Change Scan to PC Settings). Load the Carrier Sheet (see Loading Clippings, Photos, and Other Important Documents). Note Load only one Carrier Sheet at a time. 8 Press Scan to PC. The machine starts scanning. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_2_15.
Prevent Bleed Through Prevent Bleed Through 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray. • Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name). 2 Click the Device Settings tab (the example below uses Home Mode).
Prevent Bleed Through 4 5 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). 6 7 Check the Bleed Through Prevention/Base Color Removal check box and then click the OK button. Click the Advanced Settings button. The Advanced Settings dialog box will appear. Change other settings if needed (see Change Scan to PC Settings). Note When you scan newspapers or magazines with the Bleed Through Prevention/Base Color Removal feature, the scanned data can be faded.
Prevent Bleed Through file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_2_16.
Remove the Background Color (Base Color Removal) and Make Documents Easier to Read Remove the Background Color (Base Color Removal) and Make Documents Easier to Read 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. Note You can also start ControlCenter4 by doing one of the following: • (Windows ® XP, Windows Vista ®) Double-click the (ControlCenter4) icon in the task tray.
Remove the Background Color (Base Color Removal) and Make Documents Easier to Read 4 5 Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File). 6 7 Check the Bleed Through Prevention/Base Color Removal check box and then click the OK button. Click the Advanced Settings button. The Advanced Settings dialog box will appear. Change other settings if needed (see Change Scan to PC Settings).
Remove the Background Color (Base Color Removal) and Make Documents Easier to Read file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_2_17.
TWAIN Driver Settings TWAIN Driver Settings 1. Resolution You can select a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory and transfer time, but produce a finer scanned image.
TWAIN Driver Settings • 24bit Color Uses up to 16.8 million colors to scan the image. Although using 24bit Color creates an image with the most accurate color reproduction, it requires the most memory and has the longest transfer time. Note 256 Color is only available when your scanning application supports this setting. Presto! PageManager does not support 256 Color. 3. Document Size Document size is set to Letter by default. If you select Custom, you can specify the document size. 4.
TWAIN Driver Settings Short-edge binding Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_10_3.
ICA Driver Settings ICA Driver Settings Note that the item name and assignable value will vary depending on the machine. 1. Kind Select from Color, Black & White or Text. 2. Resolution Select the resolution you want to scan your document at. 3. Scan Size or Size Select the paper size of the document. 4. Orientation Select the orientation of the document. 5. Duplex Check the Duplex check box to do 2-sided (duplex) scanning. 6. Scan To Select the destination folder or destination application. 7.
ICA Driver Settings You can configure settings depending on Kind that you have chosen. Kind Configurable Settings Color Brightness, Tint, Temperature, Saturation Black & White Brightness, Contrast (Mac OS X 10.7.x only) Text Threshold Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_11_2.
Select your machine from Print & Fax or Print & Scan Select your machine from Print & Fax or Print & Scan 1 2 3 Select System Preferences in the menu bar. Click the Print & Fax icon or the Print & Scan icon. Select the machine from the list on the left side of the screen. Note If you do not see the Open Scanner button on the window, remove your machine by clicking the - button from the Print & Fax or Print & Scan list. Page Top file:///C|/Documents%20and%20Settings/mcampbell.
Use NewSoft Presto! BizCard 6 (Windows®) Use NewSoft Presto! BizCard 6 (Windows®) Presto! BizCard lets you manage the information from scanned business cards, such as names, companies, mailing addresses, phone/fax numbers and e-mail addresses, on your computer. Simply scan, or import your business cards and Presto! BizCard automatically saves the data and image for each card. Different viewing modes are available for easy searching, editing, creating, and sorting.
Scan Using Presto! PageManager Scan Using Presto! PageManager 1 Start Presto! PageManager by double-clicking the Presto! PageManager icon on your computer screen. Note The first time you use the Brother TWAIN driver, you need to set it as the default driver. To set the Brother TWAIN driver as the default driver, do the following. (1) Select Select Source in the File menu. (2) Select Brother TWAIN, then click Select. 2 Select Acquire Image Data in the File menu.
Register the Favorite Scan Settings Using ControlCenter2 (CUSTOM SCAN) (Macintosh) Register the Favorite Scan Settings Using ControlCenter2 (CUSTOM SCAN) (Macintosh) There are four buttons which you can configure to fit your scanning needs. 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon.
Register the Favorite Scan Settings Using ControlCenter2 (CUSTOM SCAN) (Macintosh) 5 6 Select the type of scan from the Scan Action field. In the Settings tab, change the scan settings. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_6.
Register the Favorite Scan Settings Using ControlCenter2 (CUSTOM SCAN) (Macintosh) The following settings can be changed. Setting Target Application Description You can select which application is used to open scanned data. Only applications installed on your computer can be selected. • Add button You can add an application to the drop-down list. Enter the Application Name (up to 30 characters) and select your preferred application by clicking the Browse button.
Register the Favorite Scan Settings Using ControlCenter2 (CUSTOM SCAN) (Macintosh) File Type Select the file type you want to use for the scanned data. Yes Yes Yes Yes Yes - Yes Yes Note • To save the document as a password-protected PDF, select Secure PDF (*.pdf) for File Type and then enter the password in the Set PDF Password dialog box. • Searchable PDF is a file format that includes the text data layer over a scanned image. This layer allows you to search the text on the image data.
Register the Favorite Scan Settings Using ControlCenter2 (CUSTOM SCAN) (Macintosh) Destination Folder Click Browse and browse to the folder you would like to save your scanned document to. Check Show Folder to automatically display the destination folder after scanning. - - - Yes Resolution You can select a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory and transfer time, but produce a finer scanned image.
Register the Favorite Scan Settings Using ControlCenter2 (CUSTOM SCAN) (Macintosh) Brightness Adjust the setting (0 to 100) to get the best image. The Yes default value of 50 represents an average and is usually suitable for most images. You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the scanned image is too light, set a lower Brightness level and scan the document again.
Register the Favorite Scan Settings Using ControlCenter2 (CUSTOM SCAN) (Macintosh) • Important documents (photos, contracts) • Thin paper (receipts) • Irregular-shaped paper (clippings) Note • Load only one Carrier Sheet at a time. • Set the document in the center of the Carrier Sheet and align the top of the document with the top of the Carrier Sheet.
Register the Favorite Scan Settings Using ControlCenter2 (CUSTOM SCAN) (Macintosh) Image OCR E-mail File Corrects the skew (within 5 degrees) of the scanned data. Yes Yes Yes Yes Automatic Image Changes the direction of the document based on the Rotation text orientation.
Scan Using Windows®Photo Gallery or Windows®Fax and Scan Scan Using Windows® Photo Gallery or Windows® Fax and Scan You can use the Windows® Photo Gallery or Windows® Fax and Scan applications for scanning. These applications use the WIA scanner driver. The steps below will guide you through the scanning operations. You may need to download Windows® Photo Gallery or Windows® Fax and Scan. 1 2 Load your document. Open your software application to scan the document.
Check Consumable Replacement Cycle (Macintosh) Check Consumable Replacement Cycle (Macintosh) 1 Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. Note If (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon. The ControlCenter icon is in Macintosh HD/Applications/Brother. The (ControlCenter2) icon will appear in the menu bar. 2 Select the DEVICE SETTINGS tab. 3 4 Click the Status Monitor button.
Check Consumable Replacement Cycle (Macintosh) Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter6_3_3.
Check Consumable Replacement Cycle (Windows®) Check Consumable Replacement Cycle (Windows® ) 1 2 Double-click the (Status Monitor) icon in the task tray. The Brother Status Monitor window will appear. If the Brother Status Monitor window warns you to replace the Separation Pad and/or the Pick-up Roller, order the necessary parts and then replace the used parts with new ones. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter6_3_2.
Loading Documents with Facing Pages Loading Documents with Facing Pages Make sure documents with ink or correction fluid are completely dry. 1 Open the Top Cover (1). 2 Fold your document in half and then insert the document into the Carrier Sheet. Note Set the document in the center of the Carrier Sheet and align the top of the document with the top of the Carrier Sheet. 3 Adjust the Document Guides (1) to fit the width of the Carrier Sheet. file:///C|/Documents%20and%20Settings/mcampbell.
Loading Documents with Facing Pages 4 Place the Carrier Sheet in the document feeder between the Guides until you feel it touch the inside of the machine. 5 Pull the Output Tray out of the machine and then unfold the Document Stopper. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_5_5.
Loading Business Cards and Plastic Cards Loading Business Cards and Plastic Cards Make sure documents with ink or correction fluid are completely dry. 1 Open the Top Cover (1). 2 Adjust the Document Guides (1) to fit the width of your document. 3 Place your document, face down and short side first in the document feeder between the Guides until you feel it touch the inside of the machine. Note file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_5_2.
Loading Business Cards and Plastic Cards Load only one plastic card at a time. 4 Pull the Output Tray out of the machine until the triangular marks match the edge of the machine. Note Certain types of plastic cards may be scratched when scanned. To prevent damage to the card, it is recommended to use the Plastic Card Carrier sheet. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_5_2.
Loading Documents Wider than Letter Size Loading Documents Wider than Letter Size Make sure documents with ink or correction fluid are completely dry. 1 Open the Top Cover (1). 2 Fold your document in half and then insert the document into the Carrier Sheet. Note Set the document in the center of the Carrier Sheet and align the top of the document with the top of the Carrier Sheet. 3 Adjust the Document Guides (1) to fit the width of the Carrier Sheet.
Loading Documents Wider than Letter Size 4 Place the Carrier Sheet in the document feeder between the Guides until you feel it touch the inside of the machine. 5 Pull the Output Tray out of the machine and then unfold the Document Stopper. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_5_4.
Create a Custom Tab (ControlCenter4 Advanced Mode) (Windows®) Create a Custom Tab (ControlCenter4 Advanced Mode) (Windows®) You can create up to three customized tabs that include up to five customized buttons with your preferred settings. • Create a Custom Tab • Create a Custom Button in Custom Tab Create a Custom Tab 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear.
Create a Custom Tab (ControlCenter4 Advanced Mode) (Windows®) 3 If you want to change the name of custom tab, right-click the custom tab and select Rename custom tab. Note You can also change the name of the custom tab by clicking Configuration and then Rename custom tab. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_4.
Document Suitable for Carrier Sheet Document Suitable for Carrier Sheet • Documents with a carbon sheet attached on the back • Documents written in pencil • Documents narrower than 2.0 in. (51 mm) wide • Documents shorter than 2.76 in. (70 mm) long • Pages thinner than 3 mil (0.
Carrier Sheet Attentions Carrier Sheet Attentions • To avoid document jams, do not load the carrier sheet upside down. Refer to the instructions printed on the carrier sheet itself for more information or see Loading Documents. • To avoid document jams, do not put several small documents into the carrier sheet at the same time. Insert only one document into the carrier sheet at a time. • Do not write on the carrier sheet, as the writing may be seen in scanned documents.
Unsupported Documents Unsupported Documents • Documents with paper clips or staples • Documents with wet ink • Fabrics, metallic sheets, Over Head Projector sheets • Glossy or mirrored media • Embossed plastic cards Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_4_4.
Use Nuance PDF Converter Professional 7 (Windows®) Use Nuance PDF Converter Professional 7 (Windows®) Nuance PDF Converter Professional 7 offers a variety of features for handling PDF files. It can unlock and open PDF files for viewing, editing, annotation and re-assembly. Installing Nuance PDF Converter Professional 7 1 2 3 4 Insert the supplied DVD-ROM into your DVD-ROM drive. The DVD-ROM top menu will appear automatically. Select your model name and then the desired language.
Loading Documents Loading Documents The document feeder can hold up to 50 pages and feeds each sheet individually. Use 20 lb (80 g/m 2) paper and always fan the pages before placing them in the document feeder. Important • DO NOT pull on the document while it is feeding. • DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped. • DO NOT use cardboard or fabric.
Loading Documents 4 Place your document, face down, top edge first in the document feeder between the Guides until you feel it touch the inside of the machine. 5 Pull the Output Tray out of the machine and then unfold the Document Stopper. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_5.
Loading Documents Longer than Letter Size Loading Documents Longer than Letter Size Make sure documents with ink or correction fluid are completely dry. 1 Open the Top Cover (1). 2 Adjust the Document Guides (1) to fit the width of your document. 3 Place your document, face down, top edge first in the document feeder between the Guides until you feel it touch the inside of the machine. file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_5_3.
Loading Documents Longer than Letter Size Note • Load only one document at a time. • Support the document with your hand if the document is longer than the Top Cover. 4 Pull the Output Tray out of the machine and then unfold the Document Stopper. Page Top file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_5_3.
