user manual

Troubleshooting

Data Remaining Print data is left in the machine's

memory.

Press . The machine will cancel

the job and clear it from the memory.

Try to print again.

Disconnected The other person or other person's

fax machine stopped the call.

Try to send or receive again.

If calls are stopped repeatedly and

you are using a VoIP (Voice over IP)

system, try changing the

Compatibility to Basic (for VoIP). (See

Telephone line interference / VoIP

on page 92.)

DR Mode in Use The machine is in Distinctive Ring

mode. You cannot change the

Receive Mode when Distinctive Ring

is on.

Set Distinctive Ring to Off. (See

Turning off Distinctive Ring

on page 35.)

High Temperature The room temperature is too high. After cooling the room, allow the

machine to cool down to room

temperature. Try again later.

Error Message Cause Action