user manual

70
Out of Fax Memory The fax memory is full. Do one of the following:
 Clear the data from the memory.
To gain extra memory, you can
turn off Memory Receive.
(See Advanced User’s Guide:
Turning off Memory Receive
operations.)
 Print the faxes that are in the
memory. (See Advanced User’s
Guide: Printing a fax from the
memory.)
Out of Memory The machine's memory is full. If a fax-sending or copy operation
is in process:
 Press and wait until the other
operations in process finish, and
then try again.
 Press OK to send the pages
scanned so far.
 Press OK to copy the pages
scanned so far.
 Clear the data in the memory. To
gain extra memory, you can turn
off Memory Receive.
(See Advanced User’s Guide:
Turning off Memory Receive
operations.)
 Print the faxes that are in the
memory. (See Advanced User’s
Guide: Printing a fax from the
memory.)
Paper Jam [Front] The paper is jammed in the machine. Remove the jammed paper. (See
Printer jam or paper jam on page 75.)
Make sure the paper length guide is
set to the correct paper size. DO NOT
extend the paper tray when you load
A5 or smaller size paper.
If there is a repeat paper jam, a small
piece of paper may be stuck in the
machine. Make sure paper is not still
jammed in the machine. (See
Additional paper jam clear operations
on page 79.)
Error Message Cause Action