Advanced User’s Guide MFC-J6920DW Version 0 USA/CAN
User's Guides and where do I find them? Which Guide? i Where is it? Product Safety Guide Read this Guide first. Please read the Safety Instructions before you set up your machine. See this Guide for trademarks and legal limitations. Printed / In the box Quick Setup Guide Follow the instructions for setting up your machine, and installing the drivers and software for the operating system and connection type you are using.
Table of Contents 1 General setup 1 Memory Storage ....................................................................................................1 Volume Settings.....................................................................................................1 Ring Volume ....................................................................................................1 Beep Volume ...................................................................................................
Additional sending operations..............................................................................15 Sending a 2-sided fax from the ADF (Automatic Document Feeder) ............15 Sending a fax manually .................................................................................15 Sending a fax at the end of a conversation ...................................................16 Dual Access (Black & White only) .................................................................
6 Printing reports 40 Fax reports...........................................................................................................40 Transmission Verification Report...................................................................40 Fax Journal (activity report) ........................................................................... 40 Reports ................................................................................................................ 41 How to print a report .........
Scan to a memory card or USB Flash drive ........................................................72 Auto Crop ......................................................................................................72 How to set a new default ...............................................................................73 How to reset to the factory settings ...............................................................74 Saving scan options as a Shortcut .....................................................
1 General setup Memory Storage Your menu settings are stored permanently, and, in the event of a power failure, will not be lost. Temporary settings (for example, Overseas Mode) will be lost. If you have chosen Set New Default for your Fax, Scan and Photo preferred settings, those settings will not be lost. Also, during a power failure, the machine will retain the date and time and programmed fax timer jobs (for example, Delayed Fax) for approximately 24 hours.
Chapter 1 Beep Volume When the beep is on, the machine will make a sound when you press the Touchscreen or Touchpanel, make a mistake, or after you send or receive a fax. You can choose a range of sound volume levels, from High to Off. a Press b c Press All Settings. d e . Swipe up or down, or press a or b to display General Setup. Press General Setup. Swipe up or down, or press a or b to display Volume. 1 Speaker Volume 1 You can choose a range of speaker volume levels, from High to Off.
General setup Automatic Daylight Saving Time You can set the machine to change automatically for daylight saving time. It will reset itself forward one hour in the Spring and backward one hour in the Fall. Make sure you have set the correct date and time in the Date & Time setting. The factory setting is Off, so you will have to turn on Automatic Daylight Saving Time as follows. a Press . b Press . c Swipe up or down, or press a or b to display Auto Daylight. d e Press Auto Daylight.
Chapter 1 Touchscreen LCD Setting the backlight brightness You can adjust the brightness of the Touchscreen LCD backlight. If you are having difficulty reading the LCD, try changing the brightness setting. a Press b c Press All Settings. d e . Swipe up or down, or press a or b to display General Setup. Press General Setup. Swipe up or down, or press a or b to display LCD Settings. f g h Press LCD Settings. i Press 4 Press Backlight. Press Light, Med or Dark. .
General setup Dial Prefix 1 1 The Dial Prefix setting will automatically dial a predefined number before every fax number you dial. For example, if your telephone system requires a “9” to dial an outside number, use this setting to automatically dial 9 for every fax you send. Setting up or changing the prefix number a Press b c Press All Settings. d e Press Initial Setup. f g h i Press Dial Prefix. j Press OK. 1 . Swipe up or down, or press a or b to display Initial Setup.
2 Security features Secure Function Lock 2.0 Secure Function Lock lets you restrict public access to certain machine functions: Fax Send Fax Receive Copy Scan 2 NOTE 2 • Only administrators can set limitations and make changes for each user. • If Fax Tx is disabled, you cannot use any functions in the Fax menu. • Polled Transmit and Polling Receive are enabled only when both Fax Tx and Fax Rx are enabled. • You cannot edit or delete a Shortcut when Secure Function Lock is set to On.
Security features c Enter a password in the Login box. (This is a password to log into the machine's Web page, not the administrator password for Secure Function Lock.) Click . Setting and changing the Administrator Password 2 You can configure these settings using a Web browser. To set up the Web page, see Before you begin to use Secure Function Lock 2.0 on page 6. Then follow the instructions below.
Chapter 2 Setting up restricted users You can set up users with restrictions and a password. You can set up to 10 restricted users. You can configure these settings using a Web browser. To set up the Web page, see Before you begin to use Secure Function Lock 2.0 on page 6. Then follow the instructions below. a b c Click Administrator. Click Secure Function Lock.
Security features Turning Secure Function Lock off a Press (where xxxxx is the user’s name). b c Press Lock OniOff. 2 This setting allows a restricted user to log on to the machine when Secure Function Lock is turned on. a NOTE Public or XXXXX (where xxxxx is • The Enter # Twice setting will not work if you use an external phone or press Hook before entering the number. You will not be asked to re-enter the number. the user’s name). Press Change User. d e Press your user name.
Chapter 2 Dial pad restriction a b c d e a Press Press All Settings. b c Press All Settings. Swipe up or down, or press a or b to display Fax. Press Fax. i Press Press Dial Pad. Press Enter # Twice, On or Off. . Address Book restriction Press . Press All Settings. Swipe up or down, or press a or b to display Fax. 2 Swipe up or down, or press a or b to display Dial Restriction. Press Dial Restriction. i Press Press Address Book. Press Enter # Twice, On or Off. .
3 Sending a fax Additional sending options Sending faxes using multiple settings When you send a fax, you can choose a combination of settings, such as Fax Resolution, 2-sided Fax, Contrast, Glass Scan Size, and Real Time TX. You can also choose Call History, Address Book, Broadcasting, Preview, Color Setting, Delayed Fax, Batch TX, Polled TX, Polling RX, Overseas Mode, Set New Default, and Factory Reset. Some settings are only available when sending black & white faxes. a b Load your document.
Chapter 3 Contrast 3 If your document is very light or very dark, you may want to change the contrast. For most documents, the factory setting Auto can be used. Auto chooses the suitable contrast for your document. Choose Light when sending a light document. Choose Dark when sending a dark document. a b Changing fax resolution The quality of a fax can be improved by changing the fax resolution.
Sending a fax NOTE You can choose four different resolution settings for black & white faxes and two for color faxes. Black & White Standard Suitable for most typed documents. Fine Good for small print and transmits a little slower than Standard resolution. S.Fine Good for small print or artwork and transmits slower than Fine resolution. Photo Use when the document has varying shades of gray or is a photograph. Photo has the slowest transmission.
Chapter 3 Restoring fax options to the factory settings b 3 (See Broadcasting (Black & White only) on page 16.) Do one of the following: When Fax Preview is set to Off, press NOTE If the Shortcut is to be used for broadcasting, press Options and choose Broadcasting in step d before entering the fax number in step b. You can restore all the fax options you have changed back to the factory settings. These settings will remain until you change them again. a c d (Fax).
Sending a fax Additional sending operations Sending a 2-sided fax from the ADF (Automatic Document Feeder) If your document is flipped on the Short edge, press 2-sided Scan: Short Edge. 3 Short edge Portrait Landscape 3 3 You can send 2-sided documents up to Legal size from the ADF. a b Load your document in the ADF. Do one of the following: When Fax Preview is set to Off, press (Fax). When Fax Preview is set to On, press (Fax) and then (Sending Faxes). c d e f Press Options.
Chapter 3 e Broadcasting (Black & White only) When you hear the fax tones, press Fax Start. If you are using the scanner glass, press Send on the Touchscreen to send the fax. Sending a fax at the end of a conversation 3 Ask the other party to wait for fax tones (beeps) and then to press the Start or Send key before hanging up. b c Load your document. d Replace the handset of the external phone.
Sending a fax g You can add numbers to the broadcast in the following ways: Press Add Number and enter a number using the keyboard on the Touchscreen. Press OK. i Press Fax Start. NOTE Broadcasting is not available when you select Color in Color Setting. Faxing from the ADF NOTE If you downloaded Internet Fax: The machine starts scanning and sending the document.
Chapter 3 Canceling a Broadcast in progress a Press b Do one of the following: 3 . To cancel the entire broadcast, press Entire Broadcast. Go to step c. To cancel the current job, press the name or number being dialed on the Touchscreen. Go to step d. To exit without canceling, press c .
Sending a fax Overseas Mode If you are having difficulty sending a fax overseas due to possible interference on the telephone line, we recommend that you turn on Overseas Mode. After you send a fax using this feature, the feature will turn itself off. a b Load your document. 3 Delayed Faxing (Black & White only) You can store up to 50 faxes in the memory to be sent within 24 hours. These faxes will be sent at the time of day you enter in step i. a b (Fax).
Chapter 3 Checking and canceling waiting jobs NOTE The number of pages you can scan into the memory depends on the amount of data that is printed on each page. j k l You can check which jobs are still waiting in the memory to be sent and cancel a job. (If there are no jobs, the Touchscreen shows No Jobs Waiting.) Press OK. Enter the fax number. Press Fax Start. NOTE Delayed Fax is not available when you select Color in Color Setting.
Sending a fax h Polling 3 Polling lets you set up your machine so other people can receive faxes from you, but they pay for the call. It also lets you call somebody else’s fax machine and receive a fax from it, so you pay for the call. The polling feature needs to be set up on both machines for this to work. Not all fax machines support polling. Polled Transmit (Black & White only) Press Yes to scan another page. Go to step i. Press No to store the document in the memory.
4 Receiving a fax Memory Receive (Black & White only) 4 Memory Receive lets you receive faxes while you are away from the machine. You can only use one Memory Receive operation at a time: Fax Forwarding g Swipe up or down, or press a or b to display Memory Receive. h i Press Memory Receive. Press Fax Forward. l If Fax Preview is set to Off, press Backup Print: On or Backup Print: Off. Fax Storage Off You can change your selection at any time.
Receiving a fax Paging 4 l If you are programming your cell phone number and do not need to enter a PIN, press OK. When you choose Paging, your machine dials the cell phone or pager number you have programmed. This activates your cell phone or pager so you will know that you have a fax message in the memory. If your pager needs a PIN, enter the PIN, press #, press Pause, and then enter your fax number followed by # #.
Chapter 4 e f g h i Swipe up or down, or press a or b to display Setup Receive. NOTE • (When Fax Preview is set to Off.) Press Setup Receive. You can also print a fax from the memory by pressing Print on the Touchscreen. Swipe up or down, or press a or b to display Memory Receive. • When you print a fax from the memory, the fax data will be erased. Press Memory Receive. Turning off Memory Receive operations Swipe up or down, or press a or b to display Fax Storage. j Press Fax Storage.
Receiving a fax Changing Memory Receive operations The Touchscreen will ask you the following question: 4 Send Fax to PC? If received faxes are in your machine’s memory when you change the Memory Receive operations, the Touchscreen will ask you one of the following questions: If all the received faxes have already been printed • If you press Yes, faxes in the memory will be sent to your PC before the setting changes. You will be asked if you want to turn on Backup Print.
Chapter 4 Remote Retrieval 4 You can change your code at any time by entering a new one. If you want to make your code inactive, press and hold in step g to restore the inactive setting (---l) and press OK. You can call your machine from any touch-tone telephone or fax machine and then use the Remote Access Code and remote commands to retrieve fax messages. Setting a Remote Access Code 4 The Remote Access Code lets you access the Remote Retrieval features when you are away from your machine.
Receiving a fax Remote Fax commands 4 Follow the commands in the table to access features when you are away from the machine. When you call the machine and enter your Remote Access Code (3 digits followed by ), the system will give two short beeps and you must enter a remote command. Remote commands 95 Change the Fax Forwarding, Paging or Fax Storage settings 1 OFF You can choose Off after you have retrieved or erased all your messages. 2 Fax Forwarding One long beep means the change is accepted.
Chapter 4 Retrieving fax messages You can call your machine from any touch-tone telephone and have your fax messages sent to another machine. Before you use this feature, you have to turn on Fax Storage or Fax Preview. (See Fax Storage on page 23 or see Basic User’s Guide: Fax Preview (Black & White only).) a b Dial your fax number. When your machine answers, enter your Remote Access Code (3 digits followed by ) at once. If you hear one long beep, you have messages.
Receiving a fax Additional receiving operations Receiving faxes into memory when paper tray is empty 4 4 As soon as the paper tray becomes empty during fax reception, the Touchscreen shows No Paper Fed. Put some paper in the paper tray. (See Basic User’s Guide: Loading paper and other print media.) (See Basic User’s Guide: Paper Size and Type.) a Press b c Press All Settings. d e Press Fax. f Press Setup Receive. h i Press Auto Reduction. j Press Press On (or Off). .
Chapter 4 Polling 4 Polling lets you set up your machine so other people can receive faxes from you, but they pay for the call. It also lets you call somebody else’s fax machine and receive a fax from it, so you pay for the call. The polling feature needs to be set up on both machines for this to work. Not all fax machines support polling. Polling receive Sequential polling (Black & White only) Sequential polling lets you request documents from several fax machines in one operation.
Receiving a fax i You can add numbers to the broadcast in the following ways: Press Add Number and enter a number using the keyboard on the Touchscreen. Press OK. Canceling a Sequential Polling Job a Press b Do one of the following: If you downloaded Internet Fax: To cancel the current job, press the name or number being dialed on the Touchscreen. Go to step d. If you want to broadcast using an E-mail , enter the E-mail address, and press OK. (See Basic User’s Guide: Entering Text.
5 Dialing and storing numbers Voice operations 5 If you have a Pulse dialing service, but need to send tone signals (for example, for telephone banking), follow the instructions below: a Do one of the following: When Fax Preview is set to Off, press (Fax). When Fax Preview is set to On, press (Fax) and then (Sending Faxes). b c Press Hook. Press # on the machine’s Touchpanel. Any digits dialed after this will send tone signals.
Dialing and storing numbers Special line considerations NOTE • This feature may not be available in certain areas of the USA and Canada. Roll-over telephone lines • The Caller ID service varies with different carriers. Call your local telephone company to find out about the kind of service available in your area. Setting up your area code (USA only) When returning calls from the Caller ID history, your machine will dial “1” plus the area code for all calls.
Chapter 5 Converting telephone wall outlets 5 There are three ways to convert to an RJ11 jack. The first two ways may require help from the telephone company. You can change the wall outlets from one RJ14 jack to two RJ11 jacks. Or, you can have an RJ11 wall outlet installed and slave or jump one of the telephone numbers to it. The third way is the easiest: Buy a triplex adapter. You can plug a triplex adapter into an RJ14 outlet.
Dialing and storing numbers Additional dialing operations Outgoing Call History The last 30 numbers you sent a fax to will be stored in the Outgoing Call history. You can choose one of these numbers to fax to, add to Address Book, or delete from the history. a Press (Fax). b Press (Call History). c d e Press Outgoing Call. Caller ID history 5 5 This feature requires the Caller ID subscriber service offered by many local telephone companies. (See Caller ID on page 32.
Chapter 5 NOTE • (USA only) If you redial from the Caller ID history outside your area code, you must set up your area code in advance. (See Setting up your area code (USA only) on page 33.) • You can print the Caller ID history List. (See How to print a report on page 41.) Dialing access codes and credit card numbers 5 Sometimes, you may want to choose from several long-distance carriers when you send a fax. Rates may vary depending on the time and destination.
Dialing and storing numbers Additional ways to store numbers Storing Address Book numbers from the Outgoing Call history 5 5 You can also store Address Book numbers from the Outgoing Call history. a Press (Fax). Storing Address Book numbers from the Caller ID history 5 If you have the Caller ID subscriber service from your telephone company, you can also store Address Book numbers from incoming calls in the Caller ID history. (See Caller ID on page 32.) a Press (Fax). b Press (Call History).
Chapter 5 j Setting up Groups for Broadcasting To store another Group for broadcasting, repeat steps c to i. 5 A Group, which is stored in the Address Book, allows you to send the same fax message to many fax numbers by pressing (Fax), (Address Book), Apply and Fax Start. (See Broadcasting (Black & White only) on page 16.) First, you'll need to store each fax number in the Address Book. (See Basic User’s Guide: Storing Address Book numbers.) Then you can include them as numbers in the Group.
Dialing and storing numbers Deleting a Group a b c d e f Press (Fax). Press (Address Book). Press Edit. Press Delete. Swipe up or down, or press a or b to display the Group you want to delete. Press the Group name to add a check mark. g Press OK. Press Yes to confirm. h Press . 5 Adding or Deleting a number in a Group a Press (Fax). b Press (Address Book). c d e Press Edit. f g Press the Group. h i Press Add/Delete.
6 Printing reports Fax reports Press i 6 on the Touchscreen to set up the The machine will print the report at the chosen time and then erase all jobs from its memory. If the machine's memory becomes full with 200 jobs before the time you chose has passed, the machine will print the Fax Journal report early and then erase all jobs from the memory. If you want an extra report before it is due to print, you can print it without erasing the jobs from the memory.
Printing reports l m Swipe up or down, or press a or b to display Every Monday, Every Tuesday, Every Wednesday, Every Thursday, Every Friday, Every Saturday or Every Sunday, and then press the first day for the 7-day countdown. Press . Reports 6 The following reports are available: Transmission Prints a Transmission Verification Report for your last transmission. Address Book Prints a list of names and numbers stored in the Address Book memory, in alphabetical order.
7 Making copies Copy options 7 7 Improving copy quality You can change the copy settings for the next copy. You can choose the copy quality. The factory setting is Normal. These settings are temporary. The machine returns to its default settings 1 minute after copying. NOTE If you choose Normal, you can only choose Plain Paper in Paper Type. Press Copy, and then press Options. Swipe up or down, or press a or b to scroll through the copy settings.
Making copies Enlarging or reducing copies You can choose an enlargement or reduction ratio. If you choose Fit to Page, your machine will adjust the size to the paper size you set. a Load your document. 7 198% 4"x6" i A4 186% 4"x6" i Letter 130% Letter i Ledger 104% EXE i Letter 100% 97% Letter i A4 93% A4 i Letter b c d e f g h Press (Copy). 85% Letter i EXE 83% Legal i A4 Enter the number of copies you want. 78% Legal i Letter Press Options.
Chapter 7 NOTE • Page Layout is not available with Enlarge/Reduce. • ADF High Speed Mode, Page Layout, 2-sidedi2-sided and 1-sidedi2-sided of 2-sided Copy, Book Copy, Sort, Thin Paper Copy, Watermark Copy and Remove Background Color are not available with Fit to Page. • Fit to Page does not work correctly when the document on the scanner glass or ADF is skewed more than 3 degrees.
Making copies g Swipe up or down, or press a or b to display Off(1in1), 2in1(Portrait), 2in1(Landscape), 2in1(ID) 1, 4in1(Portrait), 4in1(Landscape), 1to2, Poster(2x1), Poster(2x2) or Poster(3x3). Press the option you want to set. 1 For details about 2 in 1 (ID), see 2 in 1 ID Copy (Page Layout) on page 47. If you chose 2in1 or Poster(2x2) with Ledger or A3 size paper, go to step h to choose your Layout Format. If you choose another setting, go to step i. h Press Layout Format.
Chapter 7 If you are copying from the ADF, insert the document face up in the direction shown below: If you are copying from the scanner glass, place the document face down in the direction shown below: 2in1(Portrait) 2in1(Portrait) 2in1(Landscape) 2in1(Landscape) 4in1(Portrait) 4in1(Portrait) 4in1(Landscape) 4in1(Landscape) 1to2 46
Making copies Poster(2x1) 2 in 1 ID Copy (Page Layout) 7 You can copy both sides of your identification card onto one page, keeping the original card size. Make sure the paper size is set to Letter or A4. NOTE You can copy an identification card to the extent permitted under applicable laws. (See Product Safety Guide: Legal limitations for copying.) Poster(2x2) a Place your identification card face down near the left corner of the scanner glass as shown in the illustration.
Chapter 7 g Swipe up or down, or press a or b to display 2in1(ID). h i Press 2in1(ID). j Press Black Start or Color Start. The machine starts scanning one side of the identification card. k After the machine has scanned the first side, press Yes. Turn over the identification card and press OK to scan the other side. Read and confirm the displayed list of settings you have chosen, and then press OK. • You can only make one color copy at a time. 7 You can sort multiple copies.
Making copies Ink Save Mode 7 Ink Save Mode can help you save some ink. Your machine detects the edges of the image and prints the outline of the image. The amount of ink saved will vary depending on the document. Ink Save Mode: Off 7 g Swipe up or down, or press a or b to display Ink Save Mode. h i Press Ink Save Mode. j If you do not want to change any additional settings, press Black Start or Color Start. Read and confirm the displayed list of settings you have chosen, and then press OK.
Chapter 7 Thin Paper Copy 7 Auto Deskew If your document is a 2-sided Copy on thin paper, choose Thin Paper Copy so the print on the other side does not bleed through. If your scanned copy is skewed, your machine can correct the data automatically. a Load your document. b Press c d e Enter the number of copies you want. a b c d e f g h i j (Copy). Press Options. Swipe up or down, or press a or b to display Advanced Settings. Press Advanced Settings.
Making copies Book Copy 7 Watermark Copy 7 Book Copy corrects dark borders and skew when copying from the scanner glass. Your machine can automatically correct the data. You can place text into your document as a Watermark. You can select one of the template watermarks. a NOTE Load your document. b Press c d e Enter the number of copies you want. (Copy). Press Options.
Chapter 7 Watermark Copy Settings Option1 Option2 Option3 Watermark Copy Text CONFIDENTIAL* DRAFT 7 Remove Background Color Remove Background Color removes the background color of the document when copying. This may make the copy more readable and will also save some ink. COPY IMPORTANT URGENT Position A B NOTE This function is for use only when making color copies. The background color is automatically removed for all black & white copies.
Making copies 2-sided copying l You can reduce the amount of paper used for copies by copying on both sides of the paper. Press Black Start or Color Start. If you placed the document in the ADF, the machine scans the pages and starts printing. We recommend you load your document in the ADF for 2-sided copying. If you are using the scanner glass, go to step m. NOTE • You can copy 2-sided documents up to Ledger or A3 size using the ADF.
Chapter 7 2-sided copying type 7 2 sided i 2 sided Portrait 1 sided i 2 sided (Long edge flip) 1 Portrait 1 2 1 2 Landscape 1 2 2 11 11 Landscape 2 2 11 2 sided i 1 sided 1 2 2 (Long edge flip) Portrait (Short edge flip) Portrait 1 1 1 2 1 Landscape 2 2 2 Landscape 11 1 2 2 11 1 2 2 (Short edge flip) Portrait 1 1 2 2 Landscape 11 1 2 54 2
Making copies a Press b c Press Options. (Copy). Swipe up or down, or press a or b to display ADF High Speed Mode, Quality, Paper Type, Paper Size, Tray Select, Enlarge/Reduce, Density, Stack/Sort, Page Layout, 2-sided Copy or Advanced Settings, and then press the setting you want to change. Then press the new option you want. Repeat this step for each setting you want to change. d When you are finished choosing new options, press Save as Shortcut.
Chapter 7 Letter + Blank 1 NOTE • You can use only Ledger or A3 size plain paper, with the exception that you must use Letter or A4 size plain paper when choosing Ledger i Letter. 1 • If you are producing multiple color copies, Ledger 2in1, Letter + Note(L), Letter + Note(P), Letter + Grid and Letter + Blank are not available. 1 1 Letter Center 1 1 Letter i Ledger 1 Ledger i Letter • (P) means Portrait and (L) means Landscape. • You can enlarge a copy only when using Letter i Ledger.
Making copies h i j Press Options. Press the setting you want to change. Press your new option. Repeat steps i and j to change other settings as needed. k Press OK when you are finished changing the options. l Press Black Start or Color Start. If you are using the scanner glass when choosing Ledger 2in1, go to step m. m After the machine has scanned the page, press Yes to scan the next page. n Place the next page on the scanner glass. Press OK to scan the page.
8 PhotoCapture Center™: Printing photos from a memory card or USB Flash drive PhotoCapture Center™ operations Memory cards, USB Flash drives and folder structures Your machine is designed to be compatible with modern digital camera image files, memory cards and USB Flash drives; however, please read the bullet points to avoid errors: The image file extension must be .JPG (other image file extensions like .JPEG, .TIF, .GIF and so on will not be recognized).
PhotoCapture Center™: Printing photos from a memory card or USB Flash drive Movie printing 8 Print Images You can print images from movie files that are stored on a memory card or USB Flash drive. Print Index (Thumbnails) A movie file is automatically divided into 9 parts by movie recording times and is placed in 3 lines. You can then see and print the scenes that have been divided. The PhotoCapture Center™ assigns numbers for images (such as No.1, No.2, No.3, and so on).
Chapter 8 g Do one of the following: NOTE Press Print Settings to change the paper type or the paper size you are using. Go to step h. • You can enter multiple numbers at one time by using a comma or a hyphen. For example, Enter 1,3,6 to print images No.1, No.3 and No.6. Enter 1-5 to print images No.1 to No.5. If you do not want to change the paper settings, press Start. h i Press Paper Type. j k l m Press Paper Size.
PhotoCapture Center™: Printing photos from a memory card or USB Flash drive NOTE (Remove Red-Eye) • Eight thumbnails are displayed at a time with the current page number and total number of pages listed above the thumbnails. The machine will attempt to remove red-eye from your photo. If red-eye detection fails, you can press Try Again to re-detect. • Swipe left or right, or press d or c repeatedly to scroll through all photos.
Chapter 8 j Adjust the red frame around your photo. The part inside of the red frame will be printed. Press + or - to enlarge or reduce the frame size. Press a, b, d or c to move the position of the frame. Press ID photo print You can select a photo stored in a memory card or USB Flash drive and print ID photos for your resume, passport and so on. You can print four ID photos on one sheet of paper. to rotate the frame. Press OK when you have finished adjusting the frame setting.
PhotoCapture Center™: Printing photos from a memory card or USB Flash drive g Swipe up or down, or press a or b to display 2x2inch, 25x36mm, 35x45mm, 36x51mm, 45x45mm, 45x55mm, 35x48mm or 50x70mm (2x2.75inch), and then press the option you want to set as the photo size. NOTE The machine automatically crops the photo according to the size you choose. You cannot trim the photo further. h Confirm the image displayed on the Touchscreen. Rotate the image if necessary by pressing i j . Press OK.
Chapter 8 Printing a photo during a Slide Show 8 d Do one of the following: a To print an image during a slide show, press the image when it appears on the Touchscreen. Press Print Settings to change the print settings. (See PhotoCapture Center™ print settings on page 65.) b Enter the number of copies you want using the dial pad on the Touchpanel. If you do not want to change any settings, press Start to print.
PhotoCapture Center™: Printing photos from a memory card or USB Flash drive PhotoCapture Center™ print settings 8 You can change the print settings for the next print job. These settings are temporary, and the machine returns to its default settings 1 minute after printing. i Swipe up or down, or press a or b to display Print Quality. j k Press Print Quality. l If you do not want to change additional Press Normal or Photo. settings, press or OK. Press Start to print.
Chapter 8 l l If you do not want to change additional settings, press or OK. Press Start to print. Paper Size and Print Size a b Open the media slot cover. c d Press Photo. Put the memory card or USB Flash drive in the correct slot. Swipe left or right to display View Photos. e Press View Photos. Press OK. f Swipe left or right, or press d or c to display each photo. When the photo you want is displayed, press it, and then press OK. g h i Press OK. j k Press Print Settings.
PhotoCapture Center™: Printing photos from a memory card or USB Flash drive Auto Correct Auto Correct is available for most photos. The machine decides the suitable effect for your photo. a b Open the media slot cover. c d Press Photo. e 8 Adjusting Brightness, Contrast and Color 8 Brightness 8 a b Open the media slot cover. c d Press Photo. Press View Photos. Press OK. e Press View Photos. Press OK. f Swipe left or right, or press d or c to display each photo.
Chapter 8 Contrast You can choose the contrast setting. Increasing the contrast will make an image look sharper and more vivid. a b c d e f g h i j k l Open the media slot cover. 8 Color Enhancement You can turn on the color enhancement feature to print more vivid images. Print time will be slower, and depending on the image, this feature may use more ink. a b Open the media slot cover. Swipe left or right to display View Photos. c d Press Photo. Press View Photos. Press OK.
PhotoCapture Center™: Printing photos from a memory card or USB Flash drive m n Press d or c to adjust the degree of the setting. Press OK. Do one of the following: If you want to customize another color enhancement, repeat steps l and m. Press . If you want to change other settings, press to display the print setting menu and press the setting you want to change. (See PhotoCapture Center™ print settings on page 65.) o If you do not want to change additional settings, press or OK.
Chapter 8 Cropping: On 8 l If you do not want to change additional settings, press or OK. Press Start to print. Print Date Cropping: Off Borderless printing This feature expands the printable area to the edges of the paper. Printing time will be slightly slower. 8 8 You can print the date if it is already in your photo’s data. The date will be printed on the lower-right corner. If the data doesn’t have the date information, you cannot use this function. a b Open the media slot cover.
PhotoCapture Center™: Printing photos from a memory card or USB Flash drive Setting your changes as the new default You can save the print settings you use most often—such as Print Quality, Paper Type, Paper Size, Print Size, Auto Correct, Brightness, Contrast, Color Enhance, Cropping, Borderless and Print Date—by setting them as the default settings. These settings will stay until you change them again. a b Open the media slot cover. c d Press Photo.
Chapter 8 Scan to a memory card or USB Flash drive Auto Crop 8 8 You can scan multiple documents placed on the scanner glass. An individual document can be previewed on the Touchscreen before you save it. When you choose Auto Crop, the machine will scan each document and create separate files. For example, if you place four documents on the scanner glass, the machine will scan and create four separate files. If you want to create a fourpage file, choose PDF or TIFF for File Type.
PhotoCapture Center™: Printing photos from a memory card or USB Flash drive NOTE • Auto Crop is available for paper with 90-degree angles at all four corners. If one of the angles is not square, Auto Crop cannot detect the document. • If your document is too long or wide, this setting does not work properly. The document has to meet the following specification: up to 10.6 16.54 in. (270 420 mm).
Chapter 8 How to reset to the factory settings You can restore all the Scan to Media settings that you have changed—such as ADF High Speed Mode, Scan Type, Resolution, File Type, Scan Size, Scan Long Paper, Auto Crop, Skip Blank Page, and Remove Background Color—to the factory settings. a b Open the media slot cover. c d e Press Scan to Media. Put the memory card or USB Flash drive in the correct slot. You can store the scan options you use frequently by saving them as a Shortcut.
9 Printing photos from a camera Printing photos directly from a PictBridge camera 9 Setting your digital camera 9 9 Make sure your camera is in PictBridge mode. The following PictBridge settings may be available from the LCD of your PictBridge compatible camera. Depending on your camera, some of these settings may not be available.
Chapter 9 Settings Options Paper Size 4" 6" (10 15 cm) Paper Type Glossy Paper Layout Borderless: On Print Quality Fine Color Enhancement Off Print Date Off When your camera does not have any menu selections, these settings are also used. Printing Images NOTE Remove any memory card or USB Flash drive from the machine before connecting a digital camera. a b The name and availability of each setting depends on your camera's specifications. Open the media slot cover.
Printing photos from a camera d Printing photos directly from a digital camera (without PictBridge) Choose the photo you want to print following the instructions from your camera. When the machine starts printing a photo, the Touchscreen will show Printing. IMPORTANT If your camera is using the USB Mass Storage standard, you can connect your camera in storage mode. This enables you to print photos from your camera.
Chapter 9 Printing Images NOTE Remove any memory card or USB Flash drive from the machine before connecting a digital camera. a b Open the media slot cover. Make sure that your camera is turned off. Connect your camera to the USB direct interface (1) on the machine using the USB cable. 1 1 c d USB direct interface Turn on the camera. Follow the steps in Print Images on page 59.
A Routine maintenance Cleaning and checking the machine Cleaning the outside of the machine Clean the Touchscreen as follows: IMPORTANT • Press and hold down to turn the machine off. The Touchscreen will show Shutting Down for a few seconds before the power goes off. • DO NOT use any type of liquid cleaners (including ethanol). a Clean the Touchscreen with a dry, soft lint-free cloth. A Clean the outside of the machine as follows: A A IMPORTANT • Use neutral detergents.
b Wipe the outside of the machine with a dry, soft, lint-free cloth to remove dust. Cleaning the machine’s printer platen A WARNING Be sure to unplug the machine from the AC power outlet before cleaning the printer platen to avoid an electrical shock. c Lift the output paper tray cover and remove anything that is stuck inside the paper tray. d Wipe the inside and outside of the paper tray with a dry, soft, lint-free cloth to remove dust.
Routine maintenance c b Gently close the scanner cover using the finger holds on each side. CAUTION After cleaning, wipe the rollers with a dry, soft, lint-free cloth to remove all moisture. Be careful not to pinch your fingers when you close the scanner cover. Always use the finger holds provided on each side of the scanner cover when opening and closing it. d Clean the front side of the Paper Feed Rollers (1) with a soft lint-free cloth moistened with water, using a side-to-side motion.
c Lift the green Jam Clear Flap (2), and then clean the back side of the Paper Feed Rollers (1) with a soft lint-free cloth moistened with water. After cleaning, wipe the rollers with a dry, soft, lint-free cloth to remove all moisture. Cleaning the paper pick-up rollers a Unplug the machine from the AC power outlet. b Pull the paper tray completely out of the machine.
Routine maintenance c Lift the green Jam Clear Flap (1), and then clean the Paper Pick-up Rollers (2) with a soft lint-free cloth moistened with water. Slowly turn the rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft, lint-free cloth to remove all moisture. Cleaning the paper pick-up rollers for paper tray #2 a A Unplug the machine from the AC power outlet. Pull tray #2 completely out of the machine.
Checking the ink volume A Although an ink volume icon appears on the Touchscreen, you can use the ink menu to see a large graph showing the ink that is left in each cartridge. a Press . You can also press and Ink. Press Ink Volume. The Touchscreen shows the ink volume. IMPORTANT It is important to allow the machine to “park” the print head after a print job.
Routine maintenance d e Remove the orange protective part from its storage place inside the right corner of the machine. f g Open the ink cartridge cover. h Install the orange protective part, and then close the ink cartridge cover. Press the ink release levers to release the ink cartridges, and then take out the ink cartridges. (See Basic User’s Guide: Replacing the ink cartridges.) Gently close the scanner cover using the finger holds on each side.
i Wrap the machine in the bag. k j Pack the machine and the printed materials in the original carton with the original packing material as shown below. Do not pack the used ink cartridges in the carton. NOTE If you are returning your machine to Brother as part of the Exchange Service, pack only the machine. Keep all separate parts and printed materials to use with your “Exchange” machine. 1 4 3 3 2 1 86 Close the carton and tape it shut.
B Glossary B This is a comprehensive list of features and terms that appear in Brother manuals. Availability of these features depends on the model you purchased. 3.7" Touchscreen LCD and Touchpanel The Touchscreen LCD (Liquid Crystal Display) on the machine shows interactive messages and prompts for using the machine. You can operate the Touchscreen by pressing or swiping on the screen.
Compatibility group The ability of one fax unit to communicate with another. Compatibility is assured between ITU-T Groups. Contrast Setting to compensate for dark or light documents, by making faxes or copies of dark documents lighter and light documents darker. Delayed Fax Sends your fax at a specified time later. Density Changing the Density makes the whole image lighter or darker.
Glossary Journal Period The pre-programmed time period between automatically printed Fax Journal reports. You can print the Fax Journal report on demand without interrupting the cycle. Manual fax You can press Hook to hear the receiving fax machine answer before you press Fax Start to begin sending. Memory Receive Receives faxes into the machine's memory when the machine is out of paper.
Scan to Media You can scan a black & white or color document onto a memory card or USB Flash drive. Black & white images can be in the TIFF or PDF file format and color images can be in the PDF or JPEG file format. Search An alphabetical electronic listing of stored Address Book and Group numbers. Settings Tables At-a-glance instructions that show all the settings and options that are available for setting up your machine. Standard resolution 203 98 dpi (black & white). 203 196 dpi (color).
C Index Numerics 2 in 1 ID Copy ..........................................47 2-sided copy ......................................................53 fax .........................................................15 A Access codes, storing and dialing ............36 Address Book Access codes and credit card numbers ................................................36 Broadcasting .........................................16 deleting Groups .................................39 using Groups ........................
F I Fax codes changing ...............................................26 Remote Access Code ...........................26 Fax Forwarding changing remotely .......................... 27, 28 programming a number .........................22 Fax Storage .............................................23 printing from memory ............................24 turning off ..............................................24 turning on ..............................................
P Packing and shipping the machine ..........84 Paging ......................................................23 PhotoCapture Center™ Adding Effect ........................................60 DPOF printing .......................................64 from PC See Software and Network User’s Guide. ID photo ................................................62 Photo Effects Auto Correct ................................ 60, 61 Crop ...................................... 60, 61, 62 Enhance Scenery .....................
T TAD (telephone answering device), external ....................................................34 with two-line jack ...................................34 Telephone line roll over lines .........................................33 two-line telephone system ....................33 Troubleshooting checking ink volume ..............................84 Two-line telephone system ......................33 V Volume, setting beep ........................................................2 ring ........................
Brother International Corporation 200 Crossing Boulevard P.O. Box 6911 Bridgewater, NJ 08807-0911 USA Brother International Corporation (Canada) Ltd. 1 rue Hôtel de Ville, Dollard-des-Ormeaux, QC, Canada H9B 3H6 Visit us on the World Wide Web http://www.brother.com/ This machine is approved for use in the country of purchase only. Local Brother companies or their dealers will only support machines purchased in their own countries. www.brotherearth.
