AX-325/GX-6750 ELECTRONIC TYPEWRITER USER'S GUIDE CDN.ENGLISH Thank you for choosing a Brother electronic typewriter! This product is designed to deliver years of reliable operation. Some of the outstanding features of this typewriter are illustrated in the letter betow. The numbers in brackets refer to the page and box where you can find further information explaining a feature. For example, Margins (p. 2, Box 4) means that this feature is explained in box 4, on page 2.
Special note: tn thi_ Guide, the "4-" sign between two keys, like _ +_ means that you press _ and hold it down while pressing ]_ . 1 Repeat Keys The fotIowing keys wilI automaticaily repeat when held down. All Character key [-] (hyphen) [SPACE BAR] 2 Inserting [<--J _÷ _ _ 4- _;: H --_ (carrier moves from one tab to the next) and Moving Paper To insert paper: insert a sheet of paper and press _ 4- _. Paper will advance to approximately one inch from the top edge of the paper.
5 Line Spacing I Single space: Press [ALT) + [LINE 1]. One and a half space: Press [ALT] + [LINE 1 1/2]. Double space: Press [ALT] + [LINE 2]. C3-© ©'0 t 1,'2 2 '° 6 Pitch Pica (10 characters per inch): Press [ALT]+ [PITCH 10]. Elite (12 characters 7 Returning (_rj ÷ [._ j per inch): Press [ALT] + [PITCH 12]. L._ the Carrier TO return the carrier manually: will feed the paper repeatedly. S,mpty press [(-J.
10 Uppercase characters To type uppercase characters: Hold down either the right or left [SHIFT] key (the SHIFT lamp witl blink while the key is held down). Releasing this key returns the keyboard to the lowercase mode. For continuous uppercase typing: Press _ (the SHIFT lamp will blink and all the keys will be set in uppercase mode), To return to lowercase typing, press either the right or left [SHIFT] key.
15 Tabs To set tab stops: Move the carrier to the desired position using [SPACE BAR] or }<--}, then press [ALT] + [T+] to set a normal tab stop. A maximum of 8 tab stops can be set. Repeat the above step to set each tab stop. y. The right and left margins, as well as the right and left ends of the platen, are considered tab positions. To type tables: Press "--)'1to space to the next tab and type the word(s). Repeat the steps above to complete a line of your table.
18 Indenting To indent a line, move the carrier to the left margin and press ]_ + [LIND]. The carrier will move five spaces to the right of its current position. 19 Centering First move the carrier to the left margin. Press _ + IOI • The carrier will advance to a point halfway between both margins. Type the text. The characters are not printed immediately, but the carrier positions itself at the printing position.
21 Automatic Corrections on the Current Line This typewriter has a 65 character correction memory, it erases the errors on the current line. First, use H or [SPACE BAR] to line up the career with the error. @ To erase one character: Press @. The incorrect character will be erased and you can type the correct character. TO erase a series of characters, simply hold down <_. The carrier will backspace and correct continuously until you release the key.
23 Half Backspace The half backspace function is used to fit a correct word in a line after erasing a misspelled word that was one character h_ or _ than the correct word (example: replacing "fomulas" with "formulas" or "minnor" with "minor"). Delete the entire misspelled word. If the deleted word was _ than the correct word, align the carrier up with the first letter of the deleted word; if it was _, align the carrier with the _ letter of the deleted word.
Description Casse_e Ribbon Pa_er Relaase Lever Top Cover , Paper Supporter\ _.
Replacing the cassette ribbon Two types of ribbons are available: Ribbon Types Correctable film ribbon Nylon ribbon Brother Model t 030 / 1230 i 1032 To replace the cassette ribbon: 1) Use [SPACE BAR] or Hto centre of the platen, move the carrier to the 2) Open the top cover. 3) Holding the cassette with both hands, lift the front of the cassette up and out. 4) Move the cassette towards the platen to remove it.
Replacing the correction Two types of correction tape tape are available: Lift-off correction tape, to be used correctable film ribbon. Cover-up correction tape, to be used nylon ribbon. To replace the correction tape: 1) Use [SPACE BAR] or H centre of the platen. to move the carrier to the 2) Open the top cover. 3) Remove the cassette ribbon, if installed. 4) Pull off both spools, pressing against the correction tape with your thumbs.
Replacing the cassette daisy wheel The daisy wheel is housed in a clear plastic cassette for easy, damage-free handling and quick typeface changes. To replace the cassette daisy wheel: 1) Open the top cover. 2) Pull the lever towards you to release the daisy wheel lock, 3) Remove the cassette daisy wheel by pulling it out of the machine by the protruding "ear" on the top right. 4) insert the desired cassette daisy wheel into the slot and press down gently. 5) Slide the lever back t0Jts.
General Information Your typewriter comes with the following items: * Cassette ribbon , Cassette daisy wheel Correction tape Please make sure that these items are included with the machine. The power cord is stored in a compartment on the back of the machine, The power switch is located on the left side of the typewriter near the rear.
Specifications Paper capacity 12.87" (326.90mm) Typing capacity 9.0" (228.6mm) Typing speed 12 characters per second Typing pitches 10, 12 Number of character keys 46 Line spacing 1, I 1/2, 2 Tab set 8 tabs Copies Original + 4 copies Ribbons 1030 / I230 Correctable Film Ribbon 1032 Nylon Ribbon Correction tapes 3010 / 3015 Lift-off correction tape for use with correctable film ribbon 4010 cover-up correction tape for use with nyIon ribbon Dimensions 16.4" x 15.1" x 5.