Owner's Manual

E-2
1. Press
three times.
2. Select
with keys.
3. Press
.
4. Choose the device to read from with keys.
The factory setting is
memory.
Go to step 5 if the chosen device is
floppy disk、 personal computer or
network.
Go to step 6 if
memory is chosen.
5. Choose the item to modify with
keys and press to edit the setting.
The above shows an example of the device to read from: floppy disk, the reading mode: MANU, the
automatic continuation after sewing: discontinue, and the initial data reflection: don’t reflect.
6. To read the data from a floppy disk, insert the floppy disk into the operation panel.
To read the data from a computer, establish connection with it.
To read the data via network, arrange the network for the communication.
7. Press
.
8. Choose the first data for the sewing with
keys and press .
Each stroke on key will switch the order of the data to the input date order or the
alphabetical order.
Shows the mode for the reading.
Shows the device to read from.