Owner's Manual

E-5
Automatic pause insertion
A pause signal will be inserted automatically between the same two needle numbers when reading the
DST data which had been set to the needle on the setting screen of needle bar number.
■ When with BE-0101B-AC, its mechanism should give a pause between every two needle numbers.
■ The following settings are available.
Item Contents
ON Inserts a pause signal automatically between the same two needle numbers.
OFF Does not insert pauses.
■ Those settings will be retained after turning off the machine.
1. Press twice.
2. Choose
with
keys.
3. Press .
4. Choose “Auto pause ins.” with
keys.
5. Choose whether or not to insert a pause automatically with
keys.
6. Press .
The renewed setting is stored and the screen changes into the previous one.
Pressing
will cancel the modification of the setting.