Instruction manual

3. INSTALLATION
BAS-311G, BAS-326G
6
(10) Auxiliary plate
(11) Bolts with washer [10 pcs.]
Loosen the bolts with washer (12) and
adjust so that the auxiliary plate (10) and
the needle plate are at the same height.
NOTE:
Install the auxiliary plate so that it is
horizontal.
Move the work clamp arm all the way to
the right when looking from the front of
the sewing machine (the direction of the
arrow in the illustration), and then gently
tilt back the machine head.
NOTE:
Two or more people should tilt back the
machine head, and it should be tilted
gently while being held with both
hands.
5218Q
4914Q
Needle plate
Work clamp arm