Cordless Telephone User Manual
Menu and Features
17
3
General setup 3
Ring Volume 3
You can choose a range of ring volume
levels, from High to Off.
a Press d or c to adjust the volume
level.
This setting will stay until you change it
again.
Note
• If you choose Off, will appear on the
LCD.
• Even if you choose Off, the cordless
handset will ring in the lowest volume level
when you receive a transferred call.
Beeper Volume 3
When the beeper is on, the cordless handset
will beep when you press a key.
a Press Menu/OK.
b Press a or b to choose
Setup Volume.
Press Menu/OK.
c Press a or b to choose Beeper.
Press Menu/OK.
d Press a or b to On or Off.
Press Menu/OK.
e Press (Off).
Speaker Volume 3
You can choose a range of speaker volume
levels, from High to Low.
a Press Speaker Phone.
b Press d or c .
This setting will stay until you change it
again.
c Press (Off).
Handset Volume 3
You can adjust the cordless handset volume
any time you are talking on the telephone.
a Press d or c .
This setting will stay until you change it
again.
Handset Volume
(For Volume Amplify) 3
Before you begin to use the cordless
handset, you must decide if you need to set
the cordless handset volume to
Volume Amplify:On for a user who is
hearing-impaired. The AMPLIFY volume
level complies with FCC standards. Before
you use this setting, see Choosing the
Handset Volume (For Volume Amplify) in the
machine’s User’s Guide.
a Press Menu/OK.
b Press a or b to choose
Setup Volume.
Press Menu/OK.
c Press a or b to choose
Volume Amplify.
Press Menu/OK.
d Do one of the following:
If none of the users are hearing-
impaired, press a or b to choose
Off, and then press Menu/OK and
go to step f.
If some or all of the users are
hearing-impaired, press a or b to
choose On, and then press
Menu/OK.