Mobile Printer User's Guide

Chapter 2
18
Indicators 2
The indicators light and flash to indicate the printer’s status. Each indicator may light or blink in
green, red, orange, or blue. For details, see Indicators on page 42.
(Feed) button function
Operation
Eject the paper manually (manual
form feed)
Make sure that the printer is turned on and that there is paper loaded,
and then press the (Feed) button. Paper is slowly ejected as long
as the button is held down.
If you continue to hold down the (Feed) button after about 1/2 inch
(12.7 mm) of paper has been ejected, about one page length of paper
is ejected at high speed. The amount of paper ejected is determined
by the [Form Feed Mode] setting (see Form Feed Mode on page 21
or 34).
In order to assure that printing is complete before permitting a form
feed, manual form feeds cannot be performed for five seconds after
the printer has received any data.
Set the printer to service mode Make sure that the printer is turned on and that there is no paper
loaded, and then press and hold the (Feed) button for two or more
seconds until the DATA indicator turns red. Service mode is used for
printing the printer settings report (see Printing a Printer Report
on page 46).