Instruction Manual for ScanNCut Link

ManualsBrandsBrother ManualsScannersCM250

Table Of Contents

ScanNCut Link is plug-in software that can create custom data and send it to your Brother cutting machine, for use with Adobe®

Illustrator®. The custom data created with the Illustrator will be converted to FCM* file.

The transfer functions are compatible with Brother ScanNCut cutting machines. The included alignment cutting function is available

only with the ScanNCut DX series.

* FCM: File format for ScanNCut cutting data

● In order to use ScanNCut Link, make the following preparations in advance.

- It is necessary to update the software of the cutting machine to the latest version. For detailed instructions on updating the

machine, refer to the Operation Manual supplied with it.

- Adobe Illustrator (CC2017 or later) must be installed on your computer.

● For detailed instructions on using the cutting machine, refer to the Operation Manual supplied with it.

● The contents of this document are subject to change without notice.

● The screens shown in this manual may differ from the actual ones.

Compatible operating systems:

Microsoft Windows 8.1 or 10 (64-bit version)

macOS 10.13 or later (64-bit version)

Adobe Illustrator CC2017 or later (Windows/Mac)

* For additional information on the compatible operating systems, refer to the Brother support website (http://s.brother/cfoaj/).

macOS is a trademark of Apple Inc., registered in the U.S. and other countries.

Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation.

“Adobe” and “Adobe Illustrator” are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States

and /or other countries.

Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary

programs.

Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all

trademarks or registered trademarks of those respective companies.

ScanNCut Link

(plug-in for Adobe

Illustrator

)

About ScanNCut Link

Precautions

System Requirements

TRADEMARKS

Version 0

Summary of content (9 pages)

PAGE 1
EN ScanNCut Link (plug-in for Adobe® Illustrator®) About ScanNCut Link ScanNCut Link is plug-in software that can create custom data and send it to your Brother cutting machine, for use with Adobe® Illustrator®. The custom data created with the Illustrator will be converted to FCM* file. The transfer functions are compatible with Brother ScanNCut cutting machines. The included alignment cutting function is available only with the ScanNCut DX series.
PAGE 2
Preparation/Setup In order to use Brother ScanNCut Link, make the following preparations in advance. * An Internet connection is required in order to log in to CanvasWorkspace and activate functions. ■ Preparation ● ● ● Create a free account in CanvasWorkspace. Click [Register] in the login screen, and then follow the on-screen instructions to create an account. If you already have an account, log in. Update the software of the machine to the latest version.
PAGE 3
Installing the Software Plug-in Download the software plug-in and install it into Illustrator. ● If Illustrator is running, exit it before starting the installation. ● Folder names and file names may differ depending on the operating system of the computer and version of Illustrator. The procedure for Windows 10 and Illustrator CC2020 is described below. ● If multiple versions of Illustrator are installed on your computer, perform the operation with the version you will use.
PAGE 4
Transferring Cutting Data to the Cutting Machine Convert data created in Illustrator to an FCM* file, and then transfer it to the cutting machine. * FCM: File format for ScanNCut cutting data a Create a design in Illustrator. Outline the created design with a path to be converted to a cutting line. The maximum artboard size that can be transferred to the cutting machine is 296.67 mm × 603.60 mm (11.68" × 23.76").
PAGE 5
Included Functions (Alignment) The alignment cutting function is included with ScanNCut Link. This function is available only with the Brother ScanNCut DX cutting machine. The alignment cutting function adds registration marks to cutting data so the cutting machine can detect the cutting position. By using material printed with images and registration marks together with cutting data created in Illustrator and transferred to the machine, you can easily cut out multiple images with the machine.
PAGE 6
Note • The cutting data for layers that are not visible will not be transferred. Before transferring cutting data, check whether the layers are visible in the Layers panel. • The red dotted lines shown in the preview screen will not be transferred as cutting data. Using the Cutting Machine to Cut Data Containing Registration Marks Using the material printed with the images and registration marks together with the data transferred to the machine, cut the material with the machine.
PAGE 7
f Attach the material to the appropriate cutting mat, and then touch to load the mat into the machine. Attach the material to the mat so that the horizontal line of the registration mark is at the top. The machine will detect the registration marks and automatically correct the alignment of the cutting lines and the material. g Touch in the preview screen to scan the material in order to check the position of the cutting lines.
PAGE 8
Troubleshooting If the machine stops operating correctly, check the following possible problems as well as the machine's Operation Manual or the Brother support website (http://s.brother/cpoae/) before requesting service. If the problem persists, contact Brother Customer Service or a Brother authorized service center. Symptom Possible cause (or result) Solution There is an obstruction around the slot of the machine. Maintain space around the slot of the machine so that the mat can be fed out.
PAGE 9
Error Messages The following table lists some of the messages that may appear while the machine is operating as well as their corresponding solutions. Perform the necessary operation according to the instructions in the message or the solution described here. If the problem persists, contact Brother Customer Service or a Brother authorized service center. Cutting Machine Error Messages (For alignment cutting function) Error Message Cause/Solution Failed to recognize the registration marks.