Wireless Network Setup Guide

10
Note
• A single machine number is linked with a single
ScanNCutCanvas login ID. To link a different
machine to ScanNCutCanvas, perform the
registration operation again with that machine.
In that case, the link with the previously
registered machine will be cut.
• If an error occurs while transferring data, see
“Error codes/Error messages” on page 11.
For details on transferring data between
ScanNCutCanvas and your machine, refer to
“Operation Manual” or “Wireless Network Quick
Setup Guide”.
■ Deleting the linked ScanNCutCanvas
login ID
To completely delete a linked ScanNCutCanvas login ID
from the machine, follow the procedure below.
a Touch .
b Touch the “OK” key.
X The ScanNCutCanvas login ID is deleted, and the
following screen appears.
c Touch the “OK” key.
Memo
• Touch the “Register” key to register your
machine with ScanNCutCanvas again.
X For details on the procedure, refer to “Registering
Your Machine with ScanNCutCanvas” on page 8.